HARTING Industrial Cable 8-wire Cat. 7 PUR Industrial Cable 8-wire, Cat. 7, PUR Advantages General Suitable for generic cabling Category This high-speed data cable was designed for fix installation in industrial premises and its especially suitable for connections between 7 / Class F according ISO/IEC 11801 distribution cabinets and industrial outlets. respectively EN 50173-1 especially for fixed installation The four pair / eight wire PIMF-construction allows the transmission of Qualified for transmission up to IT digital and analogue signals like Ethernet 10/100Mbit/s, 10GigaBit Ethernet 10GBase-T acc. 1/10GigaBit/s, video and voice services as well as IP-based data IEEE802.3an services. Based on solid copper wires It delivers all characteristics to construct a Generic cabling system AWG23/1 delivers full 100m channel according ISO/IEC 24702:2006 respectively EN 50173-3:2007. performance up to 600MHz Maximum channel length specified up to 100m (transmission channel Applicable for industrial premises class EA) High EMC capability based on the Transmission performance meets Cat.7 specification up to 600MHz for PIMF construction 10GigaBit Ethernet transmission according IEEE802.3an. Flame retardant, halogen free and The cable is fully screened (each pair in metal foil plus an overall wire RoHS compliant braid) and guaranties a very protective signal transmission and high Oil resistant EMC performance. PUR elastomer as jacket material provide high resistance against oil and chemicals. The cable is flame retardant, halogen free and RoHS compliant. Identification Part number Drawing Industrial Cable 8-wire, Cat. 7, PUR 100 m ring 09 45 600 0651 500 m reel 09 45 600 0650 1000 m reel 09 45 600 0660 Wire: bare copper, AWG23/1 Insulation: PE, 1.4 mm Color code: whbu/bu, whor/or, whgn/gn, whbr/br Pairs: Aluminium-bonded polyester tape Overall screen: tinned copper wire braid Outer sheath: PUR elastomer, flame retardant, halogen free Color of outer sheath: yellow, RAL 1021 Overall diameter: approx. 8.3 mm All data given are in line with the actual state of art and therefore not binding. HARTING reserves the right to modify designs without giving the relevant reasons. AWi 16.03.2011 HARTING Industrial Cable 8-wire Cat. 7 PUR Technical Characteristics Performance Category 7 according to IIEC 61156-5 Mechanical Characteristics Minimal bending radius Repeated bending: 8 x diameter Single bending: 4 x diameter Tensile strength max. 110 N Crush 1000 N/100mm Electrical Characteristics at 20 C Transfer impedance 10 MHz 5 mOhm/m Coupling attenuation up to 1000 MHz 85 dB Conductor resistance max. 75 Ohm/km Insulation resistance min. 5 GOhm*km Mutual capacitance 42 pF/m Signal velocity 0.80 c Propagation delay 420 ns/100m Skew (Delay Skew) at 100 MHz 5 ns/100m Characteristic impedance at 100 MHz 100 Ohm +/- 5 Ohm Test voltage 1000 V Operating voltage max. 125 V Chemical Characteristics Flame retardant IEC 60332-1-2 Halogen free IEC 60754-2 Smoke density IEC 61034 calorific value 0.92 MJ/m Free of hazardous substances RoHS 2002/95/EG Oil resistance EN 60811-2-1 Chemical resistance Ozone resistance EN 60811 Microbe resistance DIN VDE 0282 Hydrolysis resistance DIN 53504 Thermal Characteristics Permissible temperature range fixed operation - 40 C to + 70 C flexible operation - 10 C to + 50 C Printing HARTING INDUSTRIAL INSTALLATION CABLE S/FTP CAT 7 PUR 4x2xAWG23/1 Charge Number meter marking Weight about 70 kg/km All data given are in line with the actual state of art and therefore not binding. HARTING reserves the right to modify designs without giving the relevant reasons. AWi 16.03.2011