09990000103 HARTING

DIN 41 612 Coding systems Identification Part number Drawing Dimensions in mm With the aid of the marked indents between the contact rows of the male Coding system connector a hole has to be drilled at the desired position (also see drawing). without contact loss The code pin can then be inserted into the corresponding cavity of the female connector by means of the insertion tool. This coding system is available only for the types D, E, F and interface connectors I. with code pin Code pin Metal 09 06 000 9950 Insertion tool 09 99 000 0103 Mounting example Code pin Code pin Types D, E Type F shroud coding Insert the code key into one of the keyways of the female connector as Code key shown in the drawing. Break out the corresponding area of the male shroud. Connectors coded this way can only be applied in a minimum rack spacing Type F 09 06 001 9919 of 20.32 mm. Type F Code key Type H Type MH shroud coding Code key 09 06 001 9918 Types H, MH 24 + 7 Code key Tool for breaking out the coding area of the male shroud 09 99 000 0242 00 . 15 General informationX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Extraction, Removal & Insertion Tools category: Click to view products by HARTING manufacturer: Other Similar products are found below : M8196914-08 768211-2 809-131 844751-2 8-59558-2 91018-1 12014013 12093647 1-21048-0 R282867020 12093078 12180559 1- 21048-6 12121897 DCF.91.405.5LT 1322 13549852 15314260 15313892 15350698 15350707 15430130 1643916-1 1-679532-0 1976593-3 OUTEXT-0321 2-1579008-3 2-1579008-4 229694-7 231106-1 241469 91040-3 91040-7 965004-000 965069-000 1738219-1 ET-JL05-16 FG 0300 146 3000 FIT-6 210S048 2-1579007-9 231879-1 CF-008025-000 312138-3 RJ11FODE 356-162 M8196914-10 4- 1579018-0 483249-1 5-1579007-2