HARTING Ha-VIS eCon Switches 5 to 8 Ethernet ports RJ45, SC and PoE / PoE+ Ha-VIS eCon 2000 Unmanaged Plug & Play Ethernet switches for DIN rail assembly in control cabinets Commercial Temp.: 0 C ... +55 C / Indus trial Temp.: -40 C ... +70 C Fast Ethernet Basic PoE / PoE+ Energy Efficient Ethernet Energy supply of up to 4 terminal devices via PoE+ (137 watts) according to IEEE 802.3at Fast Ethernet Non-Blocking Switch architecture according to IEEE 802.3 Variants with industrial temperature range of -40C ... +70 C Surge protection and reverse polarity protection Minimum energy consumption due to Energy-Efficient Ethernet Target markets Machinery & Industrial network Automation technology Robotics infrastructures Wind Energy Transportation Shipbuilding Solar Energy General description The Ha-VIS eCon 2000 Fast Ethernet PoE family of unmanaged Ethernet connection at the front. The selection includes various combinations of switches is equipped with up to 8 Fast Ethernet ports and allow for cost- variants with RJ45 and fibre optic ports. Automatic detection of the efficient and quick expansion and/or reconstruction of network transmission rate (auto-negotiation) and of the wiring of the twisted pair infrastructures. The switches work as power sourcing equipment (PSE) and data cable (autopolarity and auto-MDI(X)) allow for simple plug & play. All are capable of simultaneously providing the full PoE output of 34.2 watts on variants are available with the temperature rangesIndustria and up to four ports. Owing to the extremely flat design, these switches can beCommercia. accommodated in installations where space is restricted towards the cable Technical characteristics Switch Features Ethernet Ports 10BASE-Te / 100BASE-TX EEE Enclosures width 120 mm Connection type RJ45 Auto-negotiation Yes Number of ports 5, 7, 8 Switching technology Store and Forward Auto-polarity Yes Supported standards IEEE 802.3 Auto-MDI(X) Yes Frame Size 1552 bytes Transfer conditions Twisted Pair MAC table size 1k entries Transfer speed 10 / 100 Mbit/s Packet buffer size 448 kbit Transfer length 100 m (twisted pair, Cat 5) Non-blocking Yes Quality of service Yes Ethernet Ports 100BASE-FX Energy-Efficient Ethernet Yes Type of fibre Multimode (MM) Singlemode (SM) PROFINET compatible Yes Connection type SC Duplex EthernetIP compatible Yes Transfer conditions FO Wavelength 1310 nm Transfer speed 100 Mbit/s Transfer length 2 km 15 km Voltage supply Output power -19 dBm ... -14 dBm -15 dBm ... -8 dBm Nominal voltage 48 VDC 54 VDC Input sensitivity -32 dBm -34 dBm Permissible voltage range 44 VDC ... 57 VDC 50 VDC ... 57 VDC Surge protection Yes Ambient conditions Reverse polarity proof Yes Starting current 6.40 A 7.20 A Commercial temperature range 0 C ... +55 C Industrial temperature range -40 C ... +70 C Overcurrent protection at input Yes (4 A) Max. power consumption without PoE 1.2 W ... 3.36 W Storage temperature range -40 C ... +85 C Cross-section / Wire gauge 0.08 mm ... 2.5 mm (28 AWG ... 12 AWG) Relative humidity (operation) 0 % ... 95 % (not-condensing) Connection type 3-pole, pluggable screwed contact Relative humidity 0 % ... 95 % (not-condensing) Pinout + / - / (storage and transport) Supply circuit (acc. to 60950) SELV (circuit breaker 10 A) Air pressure (operation) 2000 m (795 hPa) HARTING Technology Group Note: We reserve the right to make technical changes to the products and to the content of this P.O.Box 1473, D-32325 Espelkamp document at any time without prior notification. The HARTING Technologiegruppe does not accept Wilhelm-Harting-Strae 1, D-32325 Espelkamp, Germany any responsibility for possible errors or incompletions in this document. We reserve all the rights to this document and the topics and illustrations contained within it. Copying, disclosure to third parties ICPN-Service harting.com Service hotline: +49 5772 47-9479 or use of its content - even partially - is forbidden without the prior written consent of the HARTING Technologiegruppe. Fax: +49 5772 47-495 www.HARTING.com/de/ethernet-switchesPoE Enclosures PoE PoE+ Number of PoE ports 4 Enclosures width 120 mm Standard IEEE 802.3af / IEEE 802.3at Dimensions H x W x D (without pluggable screw contact 113.5 mm x 120 mm x 27.3 mm PoE type PSE and holding bracket) Supported mode Alternative A Weight 364 g ... 420 g Supply voltage PSE 48 VDC 54 VDC Type of installation 35 mm DIN rail acc. to EN 60 715 Max. current consumption PSE 1380 mA 2380 mA Material enclosures Anodised aluminium Max. current 375 mA 638 mA Protection degree (withplugged 15.4 W per port 34.2 W per port IP30 Maximum output power PSE screw contact) 61.6 W total 136.8 W total Protection class III Supported cabling See 802.3at, section 33.1.4 PoE pinout Alternative A, MDI-X (1/2 = V-, 3/6 = V+) Approvals CE, FCC CFR 47 Part 15, cUL US 508 listed, DNV GL, LR, NK, ABB IIT ECE - Approval mark (E1): see table technical characteristics Status and diagnostic displays EMC and environmental conditions Power (Pwr) lights up green Supply voltage is applied EMC Interference immunity (EN 61000-6-1, 61 000-6-2 55024) Link/Activity (L/A) off No link Electrostatic discharge (ESD) EN 61 000-4-2 Link/Activity (L/A) lights up green Link is active Electromagnetic field EN 61 000-4-3 Link/Activity (L/A) flashes green Link is active and data is transferred Rapid transients (burst) EN 61 000-4-4 Link speed (Spd) off 10 Mbit/s Surge voltages EN 61 000-4-5 Conducted interference voltages EN 61 000-4-6 Link speed (Spd) lights up yellow 100 Mbit/s PoE status off PoE is inactive / low voltage EMC Interference emission (EN 61000-6-4, EN 55 032, PoE status lights up green Voltage in PoE range FCC CFR 47 Part 15) PoE status lights up blue Voltage in PoE+ range Mechanical stability (EN 60721-3) PoE-Status lights up red Error IEC 60068-2-6 Vibration IEC 60068-2-6 Vibration resonance search IEC 60068-2-27 Shock test Included in delivery Plugg able screw contact for voltage supply Assembly instruction Drawings Technical characteristics / order information Ports / order information Current con- Commercial Temp.: 0 C ... +55 C Industrial Temp.: -40 C ... +70 C sumption 54 Enclosures MTBF RJ45 SFP SC Switch Part no. Switch Part no. VDC with PoE width in Mio. h 1 1 5 - - 120 mm 2.39 A 0.84 Ha-VIS eCon 2050B-A-P 24 02 005 0030 Ha-VIS eCon 2050BT-A-P 24 02 005 0020 6 - 1x MM (2 km) 120 mm 2.42 A 0.78 Ha-VIS eCon 2061B-AD-P 24 02 006 1130 Ha-VIS eCon 2061BT-AD-P 24 02 006 1120 6 - 1x SM (15 km) 120 mm 2.41 A 0.79 Ha-VIS eCon 2061B-AF-P 24 02 006 1230 Ha-VIS eCon 2061BT-AF-P 24 02 006 1220 6 - 2x MM (2 km) 120 mm 2.43 A 0.76 Ha-VIS eCon 2062B-AD-P 24 02 006 2130 Ha-VIS eCon 2062BT-AD-P 24 02 006 2120 6 - 2x SM (15 km) 120 mm 2.42 A 0.78 Ha-VIS eCon 2062B-AF-P 24 02 006 2230 Ha-VIS eCon 2062BT-AF-P 24 02 006 2220 1 1 8 - - 120 mm 2.39 A 0.73 Ha-VIS eCon 2080B-A-P 24 02 008 0030 Ha-VIS eCon 2080BT-A-P 24 02 008 0020 1 E1 Approval Copyright 2014 Date of issue 06.2018 HARTING Technology Group ICPN Datasheet 0836/02 All rights reserved