HARTING Ha-VIS eCon Switches 5 to 8 Ethernet ports RJ45, SC and PoE / PoE+ Ha-VIS eCon 3000 Unmanaged Plug & Play Ethernet switches for DIN rail assembly in control cabinets Commercial Temp.: 0 C ... +55 C / Indus trial Temp.: -40 C ... +70 C Fast Ethernet Basic PoE / PoE+ Energy Efficient Ethernet Energy supply of up to 4 terminal devices via PoE+ (137 watts) according to IEEE 802.3at Fast Ethernet Non-Blocking Switch architecture according to IEEE 802.3 Variants with industrial temperature range of -40C ... +70 C Surge protection and reverse polarity protection Minimum energy consumption due to Energy-Efficient Ethernet Optimised DIN rail bracket Target markets Machinery & Industrial network Automation technology Robotics infrastructures Wind Energy Transportation Shipbuilding Solar Energy General description The Ha-VIS eCon 3000 Fast Ethernet PoE family of unmanaged Ethernet extremely high packing density on the DIN rail. The selection includes switches is equipped with up to 8 Fast Ethernet ports and allow for cost- various combinations of variants with RJ45 and fibre optic ports. Automatic efficient and quick expansion and/or reconstruction of network detection of the transmission rate (auto-negotiation) and of the wiring of the infrastructures. The switches work as power sourcing equipment (PSE) twisted pair data cable (autopolarity and auto-MDI(X)) allow for simple plug and are capable of simultaneously providing the full PoE output of 34.2 & play. All variants are available with the temperature ranges Industrial watts on up to four ports. The slender design of the switches enables an and Commercial. Technical characteristics Switch Features Ethernet Ports 10BASE-Te / 100BASE-TX Enclosures width 25 mm Connection type RJ45 Auto-negotiation Yes Number of ports 5, 6, 7, 8 Switching technology Store and Forward Auto-polarity Yes Supported standards IEEE 802.3 Auto-MDI(X) Yes Frame Size 1522 bytes Transfer conditions Twisted Pair MAC table size 1k entries Transfer speed 10 / 100 Mbit/s Packet buffer size 448 kbit Transfer length 100 m (twisted pair, Cat 5) Non-blocking Yes Quality of service Yes Ethernet Ports 100BASE-FX Energy-Efficient Ethernet Yes Type of fibre Multimode (MM) Singlemode (SM) PROFINET compatible Yes Connection type SC Duplex EthernetIP compatible Yes Transfer conditions FO Wavelength 1310 nm Transfer speed 100 Mbit/s Transfer length 2 km 15 km Voltage supply Output power -20 dBm ... -14 dBm -15 dBm ... -8 dBm Nominal voltage 48 VDC 54 VDC Input sensitivity -30 dBm -32 dBm Permissible voltage range 44 VDC ... 57 VDC 50 VDC ... 57 VDC Surge protection Yes Ambient conditions Reverse polarity proof Yes Starting current 6.40 A 7.20 A Commercial temperature range 0 C ... +55 C Overcurrent protection at input Yes (12 A) Industrial temperature range -40 C ... +70 C Max. power consumption without PoE 1.92 W ... 3.60 W Storage temperature range -40 C ... +85 C Cross-section / Wire gauge 0.08 mm ... 2.5 mm (28 AWG ... 12 AWG) Relative humidity (operation) 0 % ... 95 % (not-condensing) Connection type 3-pole, pluggable screwed contact Relative humidity 0 % ... 95 % (not-condensing) Pinout + / - / (storage and transport) Supply circuit (acc. to 60950) SELV (circuit breaker 10 A) Air pressure (operation) 2000 m (795 hPa) HARTING Technology Group Note: We reserve the right to make technical changes to the products and to the content of this P.O.Box 1473, D-32325 Espelkamp document at any time without prior notification. The HARTING Technologiegruppe does not accept Wilhelm-Harting-Strae 1, D-32325 Espelkamp, Germany any responsibility for possible errors or incompletions in this document. We reserve all the rights to this document and the topics and illustrations contained within it. Copying, disclosure to third parties ICPN-Service harting.com Service hotline: +49 5772 47-9479 or use of its content - even partially - is forbidden without the prior written consent of the HARTING Technologiegruppe. Fax: +49 5772 47-495 www.HARTING.com/de/ethernet-switchesPoE PoE PoE+ Approvals CE, FCC CFR 47 Part 15, cUL US 508 listed, DNV GL, LR, NK, ABB IIT Number of PoE ports 4 ECE - Approval mark (E1): see table technical characteristics Standard IEEE 802.3af / IEEE 802.3at PoE type PSE EMC and environmental conditions EMC Interference immunity (EN 61000-6-1, 61 000-6-2 55024) Supported mode Alternative A Electrostatic discharge (ESD) EN 61 000-4-2 Supply voltage PSE 48 VDC 54 VDC Electromagnetic field EN 61 000-4-3 Max. current consumption PSE 1380 mA 2380 mA Rapid transients (burst) EN 61 000-4-4 Max. current 375 mA 638 mA Surge voltages EN 61 000-4-5 15.4 W per port 34.2 W per port Conducted interference voltages EN 61 000-4-6 Maximum output power PSE 61.6 W total 136.8 W total Supported cabling See 802.3at, section 33.1.4 EMC Interference emission (EN 61000-6-4, EN 55 032, FCC CFR 47 Part 15) PoE pinout Alternative A, MDI-X (1/2 = V-, 3/6 = V+) Mechanical stability (EN 60721-3) IEC 60068-2-6 Vibration IEC 60068-2-6 Vibration resonance search Status and diagnostic displays IEC 60068-2-27 Shock test Power (Pwr) lights up green Supply voltage is applied Included in delivery Link/Activity (L/A) off No link Pluggable screw contact for voltage supply Link/Activity (L/A) lights up green Link is active Assembly instruction Link/Activity (L/A) lights up green Link is active and data is transferred Link speed (Spd) off 10 Mbit/s Link speed (Spd) lights up yellow 100 Mbit/s PoE status off PoE is inactive / low voltage PoE status lights up green Voltage in PoE range PoE status lights up blue Voltage in PoE+ range PoE status lights up red Error Drawings Enclosures Enclosures width 25 mm Dimensions H x W x D (without pluggable screw contact 142 mm x 25 mm x 107.5 mm and holding bracket) Weight 480 g ... 508 g Type of installation 35 mm DIN rail acc. to EN 60 715 Anodised aluminium / Powder-coated Material enclosures steel sheet Protection degree (withplugged IP30 screw contact) Degree of protection III Technical characteristics / order information Ports / order information Commercial Temp.: 0 C ... +55 C Industrial Temp.: -40 C ... +70 C Current con- Enclosures sumption 54 MTBF RJ45 SFP SC Switch Part no. Switch Part no. width VDC with PoE in Mio. h 4 - 1x MM (2 km) 25 mm 2.41 A 1.19 Ha-VIS eCon 3041B-AD-P 24 03 004 1130 Ha-VIS eCon 3041BT-AD-P 24 03 004 1120 4 - 1x SM (15 km) 25 mm 2.41 A 1.19 Ha-VIS eCon 3041B-AF-P 24 03 004 1230 Ha-VIS eCon 3041BT-AF-P 24 03 004 1220 4 - 2x MM (2 km) 25 mm 2.43 A 1.17 Ha-VIS eCon 3042B-AD-P 24 03 004 2130 Ha-VIS eCon 3042BT-AD-P 24 03 004 2120 4 - 2x SM (15 km) 25 mm 2.43 A 1.17 Ha-VIS eCon 3042B-AF-P 24 03 004 2230 Ha-VIS eCon 3042BT-AF-P 24 03 004 2220 1 1 6 - - 25 mm 2.40 A 1.18 Ha-VIS eCon 3060B-A-P 24 03 006 0030 Ha-VIS eCon 3060BT-A-P 24 03 006 0020 6 - 1x MM (2 km) 25 mm 2.42 A 1.15 Ha-VIS eCon 3061B-AD-P 24 03 006 1130 Ha-VIS eCon 3061BT-AD-P 24 03 006 1120 6 - 1x SM (15 km) 25 mm 2.42 A 1.15 Ha-VIS eCon 3061B-AF-P 24 03 006 1230 Ha-VIS eCon 3061BT-AF-P 24 03 006 1220 1 1 8 - - 25 mm 2.40 A 1.14 Ha-VIS eCon 3080B-A-P 24 03 008 0030 Ha-VIS eCon 3080BT-A-P 24 03 008 0020 1 E1 Approval Copyright 2014 Date of issue 06.2018 HARTING Technology Group ICPN Datasheet 0844/02 All rights reserved