HARTING Ha-VIS eCon Switches 5 to 7 Ethernet ports RJ45, SC/LC (SFP) and PoE / PoE+ Ha-VIS eCon 3000 Unmanaged Plug & Play Ethernet switches for DIN rail assembly in control cabinets Commercial Temp.: 0 C ... +55 C / Indus trial Temp.: -40 C ... +70 C Full Gigabit Ethernet Basic PoE / PoE+ Energy Efficient Ethernet Ener gy supply of up to 4 terminal devices via PoE+ (137 watts) acc. to IEEE 802.3at F ull gigabit Ethernet, non-blocking switch architecture acc. to IEEE 802.3 Support of jumbo frames Variants with industrial temperature range of -40C ... +70 C Surge protection and reverse polarity protection Minimum energy consumption due to Energy-Efficient Ethernet Optimised DIN rail bracket Target markets Machinery & Industrial network Automation technology Robotics infrastructures Wind Energy Transportation Shipbuilding Solar Energy General description The Ha-VIS eCon 3000 Full Gigabit family of unmanaged Ethernet switches enables an extremely high packing density on the DIN rail. Various is equipped with up to 7 gigabit Ethernet ports and allow for cost-efficient combinations of variants with RJ45, fibre optic cables and SFP ports are and quick expansion and/or reconstruction of network infrastructures available. Automatic detection of the transmission rate (auto-negotiation) with high bandwidth requirements. In this, all switches support extra-long and of the wiring of the twisted pair data cable (autopolarity and auto- Ethernet frames (jumbo frames). The switches work as power sourcing MDI(X)) allow for simple plug & play. All variants are available with the equipment (PSE) and are capable of simultaneously providing the full PoE temperature ranges Industrial and Commercial. output of 34.2 watts on up to four ports. The slender design of the switches Technical characteristics Switch Features Ethernet Ports 10BASE-Te / 100BASE-TX EEE / 1000BASE-T EEE Enclosures width 25 mm Connection type RJ45 Auto-negotiation Yes Number of ports 5, 6, 7 Auto-polarity Yes Switching technology Store and Forward Supported standards IEEE 802.3 Auto-MDI(X) Yes Frame Size 10 kbytes Transfer conditions Twisted Pair MAC table size 8k entries Transfer speed 10 / 100 / 1000 Mbit/s Packet buffer size 1 Mbit Transfer length 100 m (twisted pair, Cat 5) Non-blocking Yes Quality of service Yes Ethernet Ports 1000BASE-SX / 1000BASE-LX Energy-Efficient Ethernet Yes Type of fibre Multimode (MM) Singlemode (SM) PROFINET compatible Yes Connection type SC Duplex EthernetIP compatible Yes Transfer conditions FO Voltage supply Wavelength 850 nm 1310 nm Transfer speed 1000 Mbit/s Nominal voltage 48 VDC 54 VDC Transfer length 0.55 km 10 km Permissible voltage range 44 VDC ... 57 VDC 50 VDC ... 57 VDC Output power -9.5 dBm ... -3 dBm -9.5 dBm ... -4 dBm Surge protection Yes Input sensitivity -17 dBm -21 dBm Reverse polarity proof Yes Starting current 6.40 A 7.20 A Overcurrent protection at input Yes (12 A) SFP ports Max. power consumption without PoE 3,84 W ... 4.56 W Transfer standard Depending on used SFP Cross-section / Wire gauge 0.08 mm ... 2.5 mm (28 AWG ... 12 AWG) Connection type Depending on used SFP, RJ45 or LC Connection type 3-pole, pluggable screwed contact Transfer conditions Depending on used SFP, TP or FO Pinout + / - / Transfer speed Depending on used SFP, 100 or 1000 Mbit/s Supply circuit (acc. to 60950) SELV (circuit breaker 10 A) Transfer length Depending on used SFP HARTING Technology Group Note: We reserve the right to make technical changes to the products and to the content of this P.O.Box 1473, D-32325 Espelkamp document at any time without prior notification. The HARTING Technologiegruppe does not accept Wilhelm-Harting-Strae 1, D-32325 Espelkamp, Germany any responsibility for possible errors or incompletions in this document. We reserve all the rights to this document and the topics and illustrations contained within it. Copying, disclosure to third parties ICPN-Service harting.com Service hotline: +49 5772 47-9479 or use of its content - even partially - is forbidden without the prior written consent of the HARTING Technologiegruppe. Fax: +49 5772 47-495 www.HARTING.com/de/ethernet-switchesPoE Ambient conditions PoE PoE+ Number of PoE ports 4 Commercial temperature range 0 C ... +55 C Standard IEEE 802.3af / IEEE 802.3at Industrial temperature range -40 C ... +70 C Storage temperature range -40 C ... +85 C PoE type PSE Relative humidity (operation) 0 % ... 95 % (not-condensing) Supported mode Alternative A Relative humidity Supply voltage PSE 48 VDC 54 VDC 0 % ... 95 % (not-condensing) (storage and transport) Max. current consumption PSE 1380 mA 2380 mA Air pressure (operation) 2000 m (795 hPa) Max. current 375 mA 638 mA 15.4 W per port 34.2 W per port Maximum output power PSE 61.6 W total 136.8 W total Approvals Supported cabling See 802.3at, section 33.1.4 CE, FCC CFR 47 Part 15, cUL US 508 listed, DNV GL, LR, NK, ABB IIT PoE pinout Alternative A, MDI-X (1/2 = V-, 3/6 = V+) EMC and environmental conditions EMC Interference immunity (EN 61000-6-1, 61 000-6-2 55024) Status and diagnostic displays Electrostatic discharge (ESD) EN 61 000-4-2 Electromagnetic field EN 61 000-4-3 Power (Pwr) lights up green Supply voltage is applied Rapid transients (burst) EN 61 000-4-4 Link/Activity (L/A) off No link Surge voltages EN 61 000-4-5 Link/Activity (L/A) lights up green Link is active Conducted interference voltages EN 61 000-4-6 Link/Activity (L/A) flashes green Link is active and data is transferred Link speed (Spd) off 10 Mbit/s EMC Interference emission (EN 61000-6-4, EN 55 032, Link speed (Spd) lights up yellow 100 Mbit/s FCC CFR 47 Part 15) Link speed (Spd) lights up green 1000 Mbit/s Mechanical stability (EN 60721-3) PoE status off PoE is inactive / low voltage IEC 60068-2-6 Vibration PoE status lights up green Voltage in PoE range IEC 60068-2-6 Vibration resonance search PoE status lights up blue Voltage in PoE+ range IEC 60068-2-27 Shock test PoE status lights up red Error Included in delivery Pluggable screw contact for voltage supply Enclosures Assembly instruction Enclosures width 25 mm Dimensions H x W x D Drawings (without pluggable screw con- 142 mm x 25 mm x 107.5 mm tact and holding bracket) Weight 498 g ... 531 g Type of installation 35 mm DIN rail acc. to EN 60 715 Anodised aluminium / Powder-coated Material enclosures steel sheet Protection degree (withplugged IP30 screw contact) Protection class III Technical characteristics / order information Ports / order information Current Commercial Temp.: 0 C ... +55 C Industrial Temp.: -40 C ... +70 C consumption Enclosures MTBF 54 VDC RJ45 SFP SC Switch Part no. Switch Part no. width in Mio. h with PoE 4 - 1x MM (0.55 km) 25 mm 2.42 A 1.13 Ha-VIS eCon 3041GB-AD-P 24 03 404 1130 Ha-VIS eCon 3041GBT-AD-P 24 03 404 1120 4 - 1x SM (10 km) 25 mm 2.42 A 1.13 Ha-VIS eCon 3041GB-AF-P 24 03 404 1230 Ha-VIS eCon 3041GBT-AF-P 24 03 404 1220 4 - 2x MM (0.55 km) 25 mm 2.44 A 1.11 Ha-VIS eCon 3042GB-AD-P 24 03 404 2130 Ha-VIS eCon 3042GBT-AD-P 24 03 404 2120 4 - 2x SM (10 km) 25 mm 2.44 A 1.11 Ha-VIS eCon 3042GB-AF-P 24 03 404 2230 Ha-VIS eCon 3042GBT-AF-P 24 03 404 2220 4 3 - 25 mm 2.44 A 0.70 Ha-VIS eCon 3043GB-AC-P 24 03 404 3330 Ha-VIS eCon 3043GBT-AC-P 24 03 404 3320 5 - - 25 mm 2.42 A 1.08 Ha-VIS eCon 3050GB-A-P 24 03 405 0030 Ha-VIS eCon 3050GBT-A-P 24 03 405 0020 5 - 1x MM (0.55 km) 25 mm 2.44 A 1.06 Ha-VIS eCon 3051GB-AD-P 24 03 405 1130 Ha-VIS eCon 3051GBT-AD-P 24 03 405 1120 5 - 1x SM (10 km) 25 mm 2.44 A 1.06 Ha-VIS eCon 3051GB-AF-P 24 03 405 1230 Ha-VIS eCon 3051GBT-AF-P 24 03 405 1220 5 2 - 25 mm 2.45 A 0.68 Ha-VIS eCon 3052GB-AC-P 24 03 405 2330 Ha-VIS eCon 3052GBT-AC-P 24 03 405 2320 6 - - 25 mm 2.43 A 1.01 Ha-VIS eCon 3060GB-A-P 24 03 406 0030 Ha-VIS eCon 3060GBT-A-P 24 03 406 0020 6 1 - 25 mm 2.45 A 0.66 Ha-VIS eCon 3061GB-AC-P 24 03 406 1330 Ha-VIS eCon 3061GBT-AC-P 24 03 406 1320 7 - - 25 mm 2.45 A 0.63 Ha-VIS eCon 3070GB-A-P 24 03 407 0030 Ha-VIS eCon 3070GBT-A-P 24 03 407 0020 Copyright 2014 Date of issue 06.2018 HARTING Technology Group ICPN Datasheet 0850/02 All rights reserved