HARTING Ha-VIS eCon Switches 5 to 7 Ethernet Ports RJ45, SC/LC (SFP) and PoE/PoE+ with 24 V DC/DC Ha-VIS eCon 3000 converter Unmanaged Plug & Play Ethernet switches for DIN rail assembly in control cabinets Full Gigabit Ethernet Basic Commercial Temp.: 0 C ... +55 C / Indus trial Temp.: -40 C ... +70 C PoE+ 24 V DC/DC Energy Efficient Ethernet Use of PoE+ with 24 V DC supply (isolated) Energy supply of up to 4 terminal devices via PoE+ (137 watts) acc. to IEEE 802.3at Full gigabit Ethernet, non-blocking switch architecture acc. to IEEE 802.3 Support of jumbo frames Variants with industrial temperature range of -40C ... +70 C Surge protection and reverse polarity protection Minimum energy consumption due to Energy-Efficient Ethernet Optimised DIN rail bracket Target markets Machinery & Industrial network Automation technology Robotics infrastructures Wind Energy Transportation Shipbuilding Solar Energy General description the switches are equipped with an integrated, galvanically isolated DC/DC The Ha-VIS eCon 3000 Full Gigabit family of unmanaged Ethernet switches voltage transformer. The switches can be supplied with 24 VDC instead of is equipped with up to 7 gigabit Ethernet ports and allow for cost-efficient the usually required 54 VDC. Various combinations of variants with RJ45, and quick expansion and/or reconstruction of network infrastructures fibre optic cables and SFP ports are available. Automatic detection of the with high bandwidth requirements. In this, all switches support extra-long transmission rate (auto-negotiation) and of the wiring of the twisted pair Ethernet frames (jumbo frames). The switches work as power sourcing data cable (autopolarity and auto-MDI(X)) allow for simple plug & play. All equipment (PSE) and are capable of simultaneously providing the full PoE variants are available with the temperature ranges Industrial and output of 34.2 watts on up to four ports. Exceeding the PoE+ standard, Commercial. Technical characteristics Switch Features Ethernet Ports 10BASE-Te / 100BASE-TX EEE / 1000BASE-T EEE Enclosures width 60 mm Connection type RJ45 Auto-negotiation Yes Number of ports 5, 6, 7 Switching technology Store and Forward Auto-polarity Yes Supported standards IEEE 802.3 Auto-MDI(X) Yes Frame Size 10 kbytes Transfer conditions Twisted Pair MAC table size 8k entries Transfer speed 10 / 100 / 1000 Mbit/s Packet buffer size 1 Mbit Transfer length 100 m (twisted pair, Cat 5) Non-blocking Yes Quality of service Yes Ethernet Ports 1000BASE-SX / 1000BASE-LX Energy-Efficient Ethernet Yes PROFINET compatible Yes Type of fibre Multimode (MM) Singlemode (SM) Connection type SC Duplex EthernetIP compatible Yes Transfer conditions FO Wavelength 850 nm 1310 nm Transfer speed 1000 Mbit/s Transfer length 0.55 km 10 km Voltage supply Output power -9.5 dBm ... -4 dBm -9.5 dBm ... -3 dBm Nominal voltage 24 VDC Input sensitivity -17 dBm -21 dBm Permissible voltage range 18 VDC ... 60 VDC Surge protection Yes Reverse polarity proof Yes SFP ports Starting current 1.60 A Overcurrent protection at input Yes (10 A) Transfer standard Depending on used SFP Max. power consumption 24 VDC 141,2 W ... 141,6 W Connection type Depending on used SFP, RJ45 or LC Cross-section / Wire gauge 0.08 mm ... 2.5 mm (28 AWG ... 12 AWG) Transfer conditions Depending on used SFP, TP or FO Connection type 3-pole, pluggable screwed contact Transfer speed Depending on used SFP, 100 or 1000 Mbit/s Pinout + / - / Transfer length Depending on used SFP Supply circuit (acc. to 60950) SELV (circuit breaker 10 A) HARTING Technology Group Note: We reserve the right to make technical changes to the products and to the content of this P.O.Box 1473, D-32325 Espelkamp document at any time without prior notification. The HARTING Technologiegruppe does not accept Wilhelm-Harting-Strae 1, D-32325 Espelkamp, Germany any responsibility for possible errors or incompletions in this document. We reserve all the rights to this document and the topics and illustrations contained within it. Copying, disclosure to third parties ICPN-Service harting.com Service hotline: +49 5772 47-9479 or use of its content - even partially - is forbidden without the prior written consent of the HARTING Technologiegruppe. Fax: +49 5772 47-495 www.HARTING.com/de/ethernet-switchesPoE Ambient conditions PoE PoE+ Number of PoE ports 4 Commercial temperature range 0 C ... +55 C Standard IEEE 802.3af / IEEE 802.3at Industrial temperature range -40 C ... +70 C PoE type PSE Storage temperature range -40 C ... +85 C Supported mode Alternative A Relative humidity (operation) 0 % ... 95 % (not-condensing) Supply voltage PSE 24 VDC Relative humidity 0 % ... 95 % (not-condensing) Max. current consumption PSE 2,6 A 5,7 A (storage and transport) Air pressure (operation) 2000 m (795 hPa) Max. current 375 mA 638 mA 15.4 W per port 34.2 W per port Maximum output power PSE 61.6 W total 136.8 W total Approvals Supported cabling See 802.3at, section 33.1.4 CE, FCC CFR 47 Part 15, cUL US 508 listed, ABB IIT PoE pinout Alternative A, MDI-X (1/2 = V-, 3/6 = V+) EMC and environmental conditions EMC Interference immunity (EN 61000-6-1, 61 000-6-2 55024) Electrostatic discharge (ESD) EN 61 000-4-2 Status- und Diagnose-Anzeigen Electromagnetic field EN 61 000-4-3 Rapid transients (burst) EN 61 000-4-4 Power (Pwr) lights up green Supply voltage is applied Surge voltages EN 61 000-4-5 Link/Activity (L/A) off No link Conducted interference voltages EN 61 000-4-6 Link/Activity (L/A) lights up green Link is active Link/Activity (L/A) flashes green Link is active and data is transferred EMC Interference emission (EN 61000-6-4, EN 55 032, FCC CFR 47 Part 15) Link speed (Spd) off 10 Mbit/s Link speed (Spd) lights up yellow 100 Mbit/s Mechanical stability (EN 60721-3) Link speed (Spd) lights up green 1000 Mbit/s IEC 60068-2-6 Vibration IEC 60068-2-6 Vibration resonance search PoE status off PoE is inactive / low voltage IEC 60068-2-27 Shock test PoE status lights up blue Voltage in PoE+ range PoE status lights up red Error Included in delivery Pluggable screw contact for voltage supply Enclosures Assembly instruction Enclosures width 60 mm Drawings Dimensions H x W x D (without pluggable screw 142 mm x 60 mm x 107.5 mm contact and holding bracket) Weight 865 g ... 898 g Type of installation 35 mm DIN rail acc. to EN 60 715 Material enclosures Anodised aluminium / Powder-coated steel sheet Protection degree IP30 (withplugged screw contact) Protection class III Technical characteristics / order information Ports / order information Commercial Temp.: 0 C ... +55 C Industrial Temp.: -40 C ... +70 C Current Enclo- consumption MTBF RJ45 SFP SC sures 24 VDC Switch Part no. Switch Part no. in Mio. h width with PoE 4 - 1x MM (0.55 km) 60 mm 5.88 0.82 Ha-VIS eCon 3041GB-AD-PP 24 03 504 1130 Ha-VIS eCon 3041GBT-AD-PP 24 03 504 1120 4 - 1x SM (10 km) 60 mm 5.88 0.80 Ha-VIS eCon 3041GB-AF-PP 24 03 504 1230 Ha-VIS eCon 3041GBT-AF-PP 24 03 504 1220 4 - 2x MM (0.55 km) 60 mm 5.90 0.81 Ha-VIS eCon 3042GB-AD-PP 24 03 504 2130 Ha-VIS eCon 3042GBT-AD-PP 24 03 504 2120 4 - 2x SM (10 km) 60 mm 5.90 0.81 Ha-VIS eCon 3042GB-AF-PP 24 03 504 2230 Ha-VIS eCon 3042GBT-AF-PP 24 03 504 2220 4 3 - 60 mm 5.90 0.57 Ha-VIS eCon 3043GB-AC-PP 24 03 504 3330 Ha-VIS eCon 3043GBT-AC-PP 24 03 504 3320 5 - - 60 mm 5.88 0.80 Ha-VIS eCon 3050GB-A-PP 24 03 505 0030 Ha-VIS eCon 3050GBT-A-PP 24 03 505 0020 5 - 1x MM (0.55 km) 60 mm 5.90 0.79 Ha-VIS eCon 3051GB-AD-PP 24 03 505 1130 Ha-VIS eCon 3051GBT-AD-PP 24 03 505 1120 5 - 1x SM (10 km) 60 mm 5.90 0.79 Ha-VIS eCon 3051GB-AF-PP 24 03 505 1230 Ha-VIS eCon 3051GBT-AF-PP 24 03 505 1220 5 2 - 60 mm 5.90 0.55 Ha-VIS eCon 3052GB-AC-PP 24 03 505 2330 Ha-VIS eCon 3052GBT-AC-PP 24 03 505 2320 6 - - 60 mm 5.90 0.76 Ha-VIS eCon 3060GB-A-PP 24 03 506 0030 Ha-VIS eCon 3060GBT-A-PP 24 03 506 0020 6 1 - 60 mm 5.90 0.53 Ha-VIS eCon 3061GB-AC-PP 24 03 506 1330 Ha-VIS eCon 3061GBT-AC-PP 24 03 506 1320 7 - - 60 mm 5.90 0.52 Ha-VIS eCon 3070GB-A-PP 24 03 507 0030 Ha-VIS eCon 3070GBT-A-PP 24 03 507 0020 Copyright 2014 Date of issue 06.2018 HARTING Technology Group ICPN Datasheet 0852/03 All rights reserved