For detailed Information on Heatshrink Tools please refer to chapter application tools page 0000. Adhesives for moulded parts The newly developed W24 epoxide resin adhesive can be used in the temperature range from 75 C to +200 C. The moulded parts are factory- coated with W24 adhesive. In combination with the material G, i.e. as GW24, the adhesive has approval to VG 95343, Part 18 and Part 19. The V9500 two-component adhesive with approval to VG 95343 Part 15 can be supplied in 50g cartridges for the practical P9500 dispensing guns (see page 203). Lining with hot melt and epoxy adhesive for our range of materials on request. The LFH material H is lined with W21 (LFH) hot melt adhesive. Material specifications Description G* B7 H L -9 Material Polyester elastomer Polyolefin, Chemically Polyolefin, cross-linked (PEEX) cross linked (POX) Cross-linked (POX) Colour Black (BK) Black (BK) Black (BK) Black (BK) Black Minimum Shrink +135 C +135 C +135 C +135 C +100 C Temperature (Metric) Operating -75 C to +150 C -55 C to +135 C , -55 C to +105 C -55 C to +200 C -55 C to +120 C Temperature Intermittent +225 C Dielectric Strength 14kV/mm according 16 kV/mm 15 kV/mm 9 kV/mm to ASTM 20 kV/mm to ASTM (metric) to ASTM D2671 D2671 D2671 Flexibility Semi rigid Semi rigid Flexible Flexible Flexible Flammability VG 95343 ASTM D635 VG 95343 ASTM D635 ASTM D635 Specification VG 95343 Part 6, 7, MIL-I-81765/1 Type 1 VG 95343 part 29, DEF STAN 59-97/3 SCX15112 8, 9 DEF STAN 59-97 DEF STAN 59-97 / 3 30 NAVSEA 5617649 MIL-I-81765/4 / 3 DEF STAN 59-97/3 * standard material 194Insulation 2.3 Heatshrinkable Moulded Shapes Helashrink 1100 Series Right-angle, VG style shape with rib. This style provides connector cable strain relief and can be installed directly onto connector rear thread. Space saving right-angle shapes used here in a military application. 1152-4-G recovered on to a connector. Technical Table H H min max J J P R S JO HW JW V T Article-No. Type a b a b 10% 10% 10% 10% 20% 20% 10% 10% 411-08180 1108-1-G 16.5 7.9 16.5 3.8 17.3 20.1 15.2 4.1 1.0 1.0 411-08480 1108-4-G 16.5 7.9 16.5 3.8 17.3 20.1 15.2 4.1 1.0 1.0 3.0 1.0 411-52022 1152-4-G 24.0 10.5 24.0 6.0 26.0 25.0 19.0 10.0 1.3 0.5 3.0 1.0 411-54025 1154-4-G 30.0 14.5 30.0 6.0 32.0 27.0 20.0 12.0 1.5 0.8 3.0 1.0 411-55031 1155-4-G 31.0 18.0 31.0 7.0 40.0 31.0 31.0 15.0 1.8 1.0 3.0 1.0 411-56024 1155-4-G 36.0 22.5 36.0 8.5 46.0 38.0 26.0 15.0 1.8 1.0 3.0 1.0 411-57020 1157-4-G 43.0 28.5 43.0 10.0 55.0 45.0 30.0 16.0 2.0 1.0 3.0 1.7 411-58014 1158-4-G 60.0 35.0 60.0 16.0 80.0 54.0 35.0 30.0 3.3 1.5 3.0 1.7 411-59014 1159-4-G 66.0 45.0 66.0 17.0 108.0 68.0 42.0 51.0 3.8 2.0 3.0 2.0 411-60004 1160-4-G 82.0 61.0 82.0 25.0 118.0 84.0 52.0 39.0 4.0 4.0 3.0 2.0 All Dimensions in mm. Subject to technical changes. These moulded shapes are also available in various materials from our range,eg, B7, H, L and J on request. a As supplied In addition, the moulded shapes can also be supplied with an inner coating from our range of hot-melt and epoxy adhesives,eg, b Recovered W24,W1,W8 and WM250. 198