Cable Ties and Fixings 1.7 Cable Tie Mounts Fixing Parts with Special Adhesive SolidTack mounts offer an innovative xing solution especially for low energy surfaces like PP, PE or if drilling a hole is not possible. Suitable for a wide range of indoor and outdoor applications on varnished, plastic or metal surfaces in many areas e. g. electrical cabinet, railway, aerospace, automotive and agricultural machinery. Features and Benets MB mounts with homogeneous system of acrylic adhesive Very good initial adhesion, increases with time High cohesive strength combined with good weathering resistance Innovative xing solution for low energy surfaces like PP, PE or painted / varnished surfaces Protection foil with nger lift for easy peel off SolidTack products work on varnished and powder coated surfaces. SolidTack-Series MB G F H L One Step to the Web FH W For more information on the types of adhesive please see page 129. MB3-MB5 (side view) MB3-MB5 (plan view) Width Length Height Hole Fixing Hole Strap Width Pack TYPE (W) (L) (H) (FH) Centres (F) max. (G) Material Colour Adhesive Cont. Article-No. MB2APT 13.0 13.0 4.1 - - 2.7 PA66 Black (BK) mod. Acrylate 100 pcs. 151-00996 19.0 19.0 3.8 3.1 13.2 4.1 PA66 Black (BK) mod. Acrylate 100 pcs. 151-00432 MB3APT 19.0 19.0 3.8 3.1 13.2 4.4 PA66 Natural (NA) mod. Acrylate 100 pcs. 151-00514 28.0 28.0 4.7 4.0 20.2 5.4 PA66 Black (BK) mod. Acrylate 100 pcs. 151-00433 MB4APT 28.0 28.0 4.7 4.0 20.2 5.6 PA66 Natural (NA) mod. Acrylate 100 pcs. 151-00587 MB5APT 38.0 38.0 6.3 4.7 25.3 10.0 PA66 Black (BK) mod. Acrylate 100 pcs. 151-00434 All dimensions in mm. Subject to technical changes. Minimum Order Quantity (MOQ) may differ from package content. Other packaging options may also be available. SolidTack-Series FKH W2 W L FH Flat Ribbon Cable Mount Flat Ribbon Cable Mount (side view) (front view) Based on extremely soft wings any at cable is gently fastened. Width Width Length Hole For Cable Pack TYPE (W) (W2) (L) (FH) Width max. Material Colour Adhesive Cont. Article-No. FKH50AVHB 25.0 22.0 56.5 3.1 50.0 PA66HIR Black (BK) mod. Acrylate 100 pcs. 151-00312 FKH80AVHB 25.0 22.0 86.0 3.1 80.0 PA66HIR Black (BK) mod. Acrylate 100 pcs. 151-00313 All dimensions in mm. Subject to technical changes. Minimum Order Quantity (MOQ) may differ from package content. Other packaging options may also be available. 130 Further information at www.HellermannTyton.co.uk/xings Date of issue: April 2016C able Ties and Fixings 1.0 Material Information Material Speci cation Overview Material Operating Material Material MATERIAL Shortcut Temperature Colour** Flammability Properties* Speci cations Natural Corrosion resistant Aluminium-alloy AL -40 C to +180 C Antimagnetic (NA) Weather-resistant Chloroprene CR -20 C to +80 C Black (BK) High yield strength Resistance to radioactivity Ethylene UV-resistant, not moisture sensitive E/TFE -80 C to +170 C Blue (BU) UL94 V0 Good chemical resistance to: Tetra uoroethylene acids, bases, oxidizing agents Limited brittleness sensitivity -40 C to +90 C, Natural Flexible at low temperature Polyacetal POM UL94 HB Not moisture sensitive (+110 C, 500 h) (NA) Robust on impacts Bio-plastic, derived from vegetable oil Strong impact resistance at low -40 C to +85 C, temperature Polyamide 11 PA11 Black (BK) UL94 HB Very low moisture absorption (+105 C, 500 h) Weather-resistant Good chemical resistance Good chemical resistance to: -40 C to +85 C, Polyamide 12 PA12 Black (BK) UL94 HB acids, bases, oxidizing agents (+105 C, 500 h) UV-resistant -40 C to +150 C Natural Resistance to high temperatures Polyamide 4.6 PA46 (5000 h), +195 C (NA), UL94 V2 Very moisture sensitive Low smoke sensitive (500 h) Grey (GY) Polyamide 6 PA6 -40 C to +80 C Black (BK) UL94 V2 High yield strength Polyamide 6, Limited brittleness sensitivity PA6HIR -40 C to +80 C Black (BK) UL94 HB Higher exibility at low temperature high impact modi ed Black (BK), -40 C to +85 C, Polyamide 6.6 PA66 Natural UL94 V2 High yield strength (+105 C, 500 h) (NA) Polyamide 6.6, PA66GF13, Good resistance to: lubricants, vehicle -40 C to +105 C Black (BK) UL94 HB fuel, salt water and many solvents glass- bre reinforced PA66GF15 High yield strength Polyamide 6.6, PA66HSW -40 C to +105 C Black (BK) UL94 V2 Modi ed elevated max. temperature heat and UV stabilised UV-resistant Black (BK), High yield strength Polyamide 6.6, PA66HS -40 C to +105 C Natural UL94 V2 Modi ed elevated heat stabilised max. temperature (NA) Limited brittleness sensitivity Polyamide 6.6, -40 C to +80 C, PA66HIR Black (BK) UL94 HB Higher exibility at low high impact modi ed (+105 C, 500 h) temperature Limited brittleness sensitivity Polyamide 6.6, Higher exibility at low temperature high impact modi ed, heat PA66HIRHSW -40 C to +110 C Black (BK) UL94 HB Modi ed elevated max. temperature and UV stabilised High yield strength, UV-resistant Polyamide 6.6, Limited brittleness sensitivity high impact modi ed, heat PA66HIRHS -40 C to +105 C Black (BK) UL94 HB Higher exibility at low temperature Modi ed elevated max. temperature stabilised Polyamide 6.6, -40 C to +80 C, Limited brittleness sensitivity high impact modi ed, scan PA66HIR(S) Black (BK) UL94 HB Higher exibility at low temperature (+105 C, 500 h) black Polyamide 6.6, -40 C to +85 C, High yield strength PA66W Black (BK) UL94 V2 UV-resistant UV-resistant (+105 C, 500 h) Tefzel is a registered trademark of DuPont. General linguistic usage for cable ties made from raw material E/TFE is Tefzel -Tie. **More colours on request. In additon to Tefzel from DuPont HellermannTyton is also using equivalent E/TFE raw material from other suppliers. * These details are only rough guide values. They should not be regarded as a material speci cation and are no substitute for a suitability test. Please see our datasheets for further details. HF = Halogenfree LFH = Limited Fire Hazard RoHS = Restriction of Hazardous Substances 24 Further information at www.HellermannTyton.co.uk/ xings Date of issue: April 2016