Cable Ties and Fixings 1.6 Cable Ties With Fixing Elements 1-Piece Fixing Ties for Weld Studs For cable routing alongside the stud Features and Benets Cable tie head always situated in dened position Easy to install without the need for a tool Bundles are routed very close to stud Material specication please see page 24. T50SOSSBD-M8/10. T50SOSSBU-M8/10 for bundles which run below the stud. This outside serrated cable tie with weld stud mounting keeps the cables close to the xing stud. L W T50SOSSBD-M8/M10 Width Length Bundle Stud TYPE Drawing (W) (L) max. Material Colour Tools Article-No. T50SOSSBD-M10 5.7 175.0 30.0 150 10.0 PA66HSW Black (BK) 2-10 157-00040 T50SOSSBD-M8 5.7 175.0 30.0 150 8.0 PA66HSW Black (BK) 2-10 157-00039 T50SOSSBU-M10 5.7 175.0 30.0 150 10.0 PA66HSW Grey (GY) 2-10 157-00067 T50SOSSBU-M8 5.7 175.0 30.0 150 8.0 PA66HSW Grey (GY) 2-10 157-00066 T50SOSSBS5E 4.7 160.0 35.0 225 5.0 PA66HS Black (BK) 2-10 155-12300 All dimensions in mm. Subject to technical changes. Recommended Tools 2 3 4 5 6 7 8 9 10 MK20 MK21 MK3SP MK3PNSP2 EVO7 MK7HT MK7P MK6 MK9 For more information on toolings please refer to the Application Tooling chapter. 114 Further information at www.HellermannTyton.co.uk/xings Date of issue: April 2016C able Ties and Fixings 1.0 Material Information Material Speci cation Overview Material Operating Material Material MATERIAL Shortcut Temperature Colour** Flammability Properties* Speci cations Natural Corrosion resistant Aluminium-alloy AL -40 C to +180 C Antimagnetic (NA) Weather-resistant Chloroprene CR -20 C to +80 C Black (BK) High yield strength Resistance to radioactivity Ethylene UV-resistant, not moisture sensitive E/TFE -80 C to +170 C Blue (BU) UL94 V0 Good chemical resistance to: Tetra uoroethylene acids, bases, oxidizing agents Limited brittleness sensitivity -40 C to +90 C, Natural Flexible at low temperature Polyacetal POM UL94 HB Not moisture sensitive (+110 C, 500 h) (NA) Robust on impacts Bio-plastic, derived from vegetable oil Strong impact resistance at low -40 C to +85 C, temperature Polyamide 11 PA11 Black (BK) UL94 HB Very low moisture absorption (+105 C, 500 h) Weather-resistant Good chemical resistance Good chemical resistance to: -40 C to +85 C, Polyamide 12 PA12 Black (BK) UL94 HB acids, bases, oxidizing agents (+105 C, 500 h) UV-resistant -40 C to +150 C Natural Resistance to high temperatures Polyamide 4.6 PA46 (5000 h), +195 C (NA), UL94 V2 Very moisture sensitive Low smoke sensitive (500 h) Grey (GY) Polyamide 6 PA6 -40 C to +80 C Black (BK) UL94 V2 High yield strength Polyamide 6, Limited brittleness sensitivity PA6HIR -40 C to +80 C Black (BK) UL94 HB Higher exibility at low temperature high impact modi ed Black (BK), -40 C to +85 C, Polyamide 6.6 PA66 Natural UL94 V2 High yield strength (+105 C, 500 h) (NA) Polyamide 6.6, PA66GF13, Good resistance to: lubricants, vehicle -40 C to +105 C Black (BK) UL94 HB fuel, salt water and many solvents glass- bre reinforced PA66GF15 High yield strength Polyamide 6.6, PA66HSW -40 C to +105 C Black (BK) UL94 V2 Modi ed elevated max. temperature heat and UV stabilised UV-resistant Black (BK), High yield strength Polyamide 6.6, PA66HS -40 C to +105 C Natural UL94 V2 Modi ed elevated heat stabilised max. temperature (NA) Limited brittleness sensitivity Polyamide 6.6, -40 C to +80 C, PA66HIR Black (BK) UL94 HB Higher exibility at low high impact modi ed (+105 C, 500 h) temperature Limited brittleness sensitivity Polyamide 6.6, Higher exibility at low temperature high impact modi ed, heat PA66HIRHSW -40 C to +110 C Black (BK) UL94 HB Modi ed elevated max. temperature and UV stabilised High yield strength, UV-resistant Polyamide 6.6, Limited brittleness sensitivity high impact modi ed, heat PA66HIRHS -40 C to +105 C Black (BK) UL94 HB Higher exibility at low temperature Modi ed elevated max. temperature stabilised Polyamide 6.6, -40 C to +80 C, Limited brittleness sensitivity high impact modi ed, scan PA66HIR(S) Black (BK) UL94 HB Higher exibility at low temperature (+105 C, 500 h) black Polyamide 6.6, -40 C to +85 C, High yield strength PA66W Black (BK) UL94 V2 UV-resistant UV-resistant (+105 C, 500 h) Tefzel is a registered trademark of DuPont. General linguistic usage for cable ties made from raw material E/TFE is Tefzel -Tie. **More colours on request. In additon to Tefzel from DuPont HellermannTyton is also using equivalent E/TFE raw material from other suppliers. * These details are only rough guide values. They should not be regarded as a material speci cation and are no substitute for a suitability test. Please see our datasheets for further details. HF = Halogenfree LFH = Limited Fire Hazard RoHS = Restriction of Hazardous Substances 24 Further information at www.HellermannTyton.co.uk/ xings Date of issue: April 2016