Cable Ties and Fixings 1.9 Clips, Clamps and Plugs Plastic P-Clips HP-Series For permanent or semi-permanent cable xings, this range of P-Clips can be used in a variety of industries. Their light weight form makes them particularly suitable for use in the aerospace industry where minimising weight, but retaining a strong xing, is vitally important. Features and Benets Manufactured from Polyamide Good temperature resistance and high strength Wide range of sizes for every application P-Clips H1P - H18P in different dimensions. R WT F P-Clip H1P - H18P (side view) P-Clip H1P - H18P (plan view) Width Wall Hole Bundle Fixing Hole Radius TYPE (W) (WT) (FH) max. Centres (F) (R) Material Colour Article-No. 10.0 0.80 4.2 3.2 8.5 0.5 PA66 Natural (NA) 211-60019 H1P 10.0 0.80 4.2 3.2 8.5 0.5 PA66HS Black (BK) 211-60000 10.0 1.00 4.2 5.0 9.5 1.0 PA66 Natural (NA) 211-60029 H2P 10.0 1.00 4.2 5.0 9.5 1.0 PA66HS Black (BK) 211-60001 10.0 1.00 4.2 6.5 10.0 1.0 PA66 Natural (NA) 211-60039 H3P 10.0 1.00 4.2 6.5 10.0 1.0 PA66HS Black (BK) 211-60002 10.0 1.20 4.2 8.0 10.0 1.0 PA66 Natural (NA) 211-60049 H4P 10.0 1.20 4.2 8.0 10.0 1.0 PA66HS Black (BK) 211-60003 10.0 1.20 4.2 9.5 11.0 1.0 PA66 Natural (NA) 211-60059 H5P 10.0 1.20 4.2 9.5 11.0 1.0 PA66HS Black (BK) 211-60004 10.0 1.20 4.2 11.0 13.0 1.0 PA66 Natural (NA) 211-60069 H6P 10.0 1.20 4.2 11.0 13.0 1.0 PA66HS Black (BK) 211-60005 10.0 1.20 4.2 12.5 14.0 1.5 PA66 Natural (NA) 211-60079 H7P 10.0 1.20 4.2 12.5 14.0 1.5 PA66HS Black (BK) 211-60006 10.0 1.50 4.2 14.0 15.0 1.5 PA66 Natural (NA) 211-60089 H8P 10.0 1.50 4.2 14.0 15.0 1.5 PA66HS Black (BK) 211-60007 10.0 1.50 4.2 16.0 16.0 1.5 PA66 Natural (NA) 211-60099 H9P 10.0 1.50 4.2 16.0 16.0 1.5 PA66HS Black (BK) 211-60008 10.0 1.50 4.2 17.5 17.0 1.5 PA66 Natural (NA) 211-60109 H10P 10.0 1.50 4.2 17.5 17.0 1.5 PA66HS Black (BK) 211-60009 H11P 10.0 1.50 4.2 19.0 18.0 2.0 PA66 Natural (NA) 211-60119 H12P 10.0 1.50 4.2 20.5 19.0 2.0 PA66 Natural (NA) 211-60129 H13P 12.0 1.50 5.2 22.0 20.5 2.0 PA66 Natural (NA) 211-60139 H14P 12.0 1.50 5.2 24.0 21.5 2.0 PA66 Natural (NA) 211-60149 H15P 12.0 1.50 5.2 25.5 23.0 2.5 PA66 Natural (NA) 211-60159 H16P 12.0 1.50 5.2 28.5 24.0 2.5 PA66 Natural (NA) 211-60169 H17P 12.0 1.50 5.2 31.5 26.0 2.5 PA66 Natural (NA) 211-60179 H18P 12.0 1.50 5.2 35.0 27.5 2.5 PA66 Natural (NA) 211-60189 All dimensions in mm. Subject to technical changes. 178 Further information at www.HellermannTyton.co.uk/xings Date of issue: April 2016C able Ties and Fixings 1.0 Material Information Material Speci cation Overview Material Operating Material Material MATERIAL Shortcut Temperature Colour** Flammability Properties* Speci cations Natural Corrosion resistant Aluminium-alloy AL -40 C to +180 C Antimagnetic (NA) Weather-resistant Chloroprene CR -20 C to +80 C Black (BK) High yield strength Resistance to radioactivity Ethylene UV-resistant, not moisture sensitive E/TFE -80 C to +170 C Blue (BU) UL94 V0 Good chemical resistance to: Tetra uoroethylene acids, bases, oxidizing agents Limited brittleness sensitivity -40 C to +90 C, Natural Flexible at low temperature Polyacetal POM UL94 HB Not moisture sensitive (+110 C, 500 h) (NA) Robust on impacts Bio-plastic, derived from vegetable oil Strong impact resistance at low -40 C to +85 C, temperature Polyamide 11 PA11 Black (BK) UL94 HB Very low moisture absorption (+105 C, 500 h) Weather-resistant Good chemical resistance Good chemical resistance to: -40 C to +85 C, Polyamide 12 PA12 Black (BK) UL94 HB acids, bases, oxidizing agents (+105 C, 500 h) UV-resistant -40 C to +150 C Natural Resistance to high temperatures Polyamide 4.6 PA46 (5000 h), +195 C (NA), UL94 V2 Very moisture sensitive Low smoke sensitive (500 h) Grey (GY) Polyamide 6 PA6 -40 C to +80 C Black (BK) UL94 V2 High yield strength Polyamide 6, Limited brittleness sensitivity PA6HIR -40 C to +80 C Black (BK) UL94 HB Higher exibility at low temperature high impact modi ed Black (BK), -40 C to +85 C, Polyamide 6.6 PA66 Natural UL94 V2 High yield strength (+105 C, 500 h) (NA) Polyamide 6.6, PA66GF13, Good resistance to: lubricants, vehicle -40 C to +105 C Black (BK) UL94 HB fuel, salt water and many solvents glass- bre reinforced PA66GF15 High yield strength Polyamide 6.6, PA66HSW -40 C to +105 C Black (BK) UL94 V2 Modi ed elevated max. temperature heat and UV stabilised UV-resistant Black (BK), High yield strength Polyamide 6.6, PA66HS -40 C to +105 C Natural UL94 V2 Modi ed elevated heat stabilised max. temperature (NA) Limited brittleness sensitivity Polyamide 6.6, -40 C to +80 C, PA66HIR Black (BK) UL94 HB Higher exibility at low high impact modi ed (+105 C, 500 h) temperature Limited brittleness sensitivity Polyamide 6.6, Higher exibility at low temperature high impact modi ed, heat PA66HIRHSW -40 C to +110 C Black (BK) UL94 HB Modi ed elevated max. temperature and UV stabilised High yield strength, UV-resistant Polyamide 6.6, Limited brittleness sensitivity high impact modi ed, heat PA66HIRHS -40 C to +105 C Black (BK) UL94 HB Higher exibility at low temperature Modi ed elevated max. temperature stabilised Polyamide 6.6, -40 C to +80 C, Limited brittleness sensitivity high impact modi ed, scan PA66HIR(S) Black (BK) UL94 HB Higher exibility at low temperature (+105 C, 500 h) black Polyamide 6.6, -40 C to +85 C, High yield strength PA66W Black (BK) UL94 V2 UV-resistant UV-resistant (+105 C, 500 h) Tefzel is a registered trademark of DuPont. General linguistic usage for cable ties made from raw material E/TFE is Tefzel -Tie. **More colours on request. In additon to Tefzel from DuPont HellermannTyton is also using equivalent E/TFE raw material from other suppliers. * These details are only rough guide values. They should not be regarded as a material speci cation and are no substitute for a suitability test. Please see our datasheets for further details. HF = Halogenfree LFH = Limited Fire Hazard RoHS = Restriction of Hazardous Substances 24 Further information at www.HellermannTyton.co.uk/ xings Date of issue: April 2016