Cable Ties and Fixings 1.8 Fixing Elements Fixing Base LOK-Series The LOK mounts, in conjunction with a cable tie, can be used either indoors or outdoors for a diverse range of applications from holding climbing plants, to securing cables running between buildings. Features and Benefits LOK01 - LOK05 usable with any cable ties up to 9 mm wide Suitable for a wide range of materials, including concrete, brick, block and wood Installed by knocking into 7 mm or 8 mm diameter hole LOK01B is designed for soft brickwork and 6 mm holes Elongated head of LOK05 for setting bundles at a distance LOK01 fixing bases for indoor and outdoor use. from brickwork L The whole LOK-Series can ideally W be combined with cable ties up to 9 mm cable tie width. L2 L LOK01 fixing base (front view) LOK05 fixing base (front view) Width Length Length Length Strap Width Hole TYPE (W) (L) (L2) (L3) D max. (G) (FH) Material Colour Article-No. LOK01B 12.0 30.0 6.5 2.5 7.2 9.0 6.0 PA6HIR Black (BK) 151-80500 LOK01S 12.0 34.0 6.5 2.5 9.2 9.0 7.0 - 8.0 PA6HIR Black (BK) 151-80600 LOK01 12.0 44.0 6.5 2.5 9.2 9.0 7.0 - 8.0 PA6HIR Black (BK) 151-80110 LOK05 12.0 49.0 12.5 2.5 9.2 9.0 7.0 - 8.0 PA6HIR Black (BK) 151-80700 All dimensions in mm. Subject to technical changes. Further information at www.HellermannTyton.com/fixings 165 Date of issue: October 2015Cable Ties and Fixings 1.0 Material Information Material Specification Overview Material Operating Material Material MATERIAL Shortcut Temperature Colour** Flammability Properties* Specifications Natural Corrosion resistant Aluminium-alloy AL -40 C to +180 C Antimagnetic (NA) Weather-resistant Chloroprene CR -20 C to +80 C Black (BK) High yield strength Resistance to radioactivity Ethylene UV-resistant, not moisture sensitive E/TFE -80 C to +170 C Blue (BU) UL94 V0 Good chemical resistance to: Tetrafluoroethylene acids, bases, oxidizing agents Limited brittleness sensitivity -40 C to +90 C, Natural Flexible at low temperature Polyacetal POM UL94 HB Not moisture sensitive (+110 C, 500 h) (NA) Robust on impacts Bio-plastic, derived from vegetable oil Strong impact resistance at low -40 C to +85 C, temperature Polyamide 11 PA11 Black (BK) UL94 HB Very low moisture absorption (+105 C, 500 h) Weather-resistant Good chemical resistance Good chemical resistance to: -40 C to +85 C, Polyamide 12 PA12 Black (BK) UL94 HB acids, bases, oxidizing agents (+105 C, 500 h) UV-resistant -40 C to +150 C Natural Resistance to high temperatures Polyamide 4.6 PA46 (5000 h), +195 C (NA), UL94 V2 Very moisture sensitive Low smoke sensitive (500 h) Grey (GY) Polyamide 6 PA6 -40 C to +80 C Black (BK) UL94 V2 High yield strength Polyamide 6, Limited brittleness sensitivity PA6HIR -40 C to +80 C Black (BK) UL94 HB Higher flexibility at low temperature high impact modified Black (BK), -40 C to +85 C, Polyamide 6.6 PA66 Natural UL94 V2 High yield strength (+105 C, 500 h) (NA) Polyamide 6.6, PA66GF13, Good resistance to: lubricants, vehicle -40 C to +105 C Black (BK) UL94 HB fuel, salt water and many solvents glass-fibre reinforced PA66GF15 High yield strength Polyamide 6.6, PA66HSW -40 C to +105 C Black (BK) UL94 V2 Modified elevated max. temperature heat and UV stabilised UV-resistant Black (BK), High yield strength Polyamide 6.6, PA66HS -40 C to +105 C Natural UL94 V2 Modified elevated heat stabilised max. temperature (NA) Limited brittleness sensitivity Polyamide 6.6, -40 C to +80 C, PA66HIR Black (BK) UL94 HB Higher flexibility at low high impact modified (+105 C, 500 h) temperature Limited brittleness sensitivity Polyamide 6.6, Higher flexibility at low temperature high impact modified, heat PA66HIRHSW -40 C to +110 C Black (BK) UL94 HB Modified elevated max. temper ature and UV stabilised High yield strength, UV-resistant Polyamide 6.6, Limited brittleness sensitivity high impact modified, heat PA66HIRHS -40 C to +105 C Black (BK) UL94 HB Higher flexibility at low temperature Modified elevated max. temperature stabilised Polyamide 6.6, -40 C to +80 C, Limited brittleness sensitivity high impact modified, scan PA66HIR(S) Black (BK) UL94 HB Higher flexibility at low temperature (+105 C, 500 h) black Polyamide 6.6, -40 C to +85 C, High yield strength PA66W Black (BK) UL94 V2 UV-resistant UV-resistant (+105 C, 500 h) Tefzel is a registered trademark of DuPont. General linguistic usage for cable ties made from raw material E/TFE is Tefzel - **More colours on request. Tie. In additon to Tefzel from DuPont HellermannTyton is also using equivalent E/TFE raw material from other suppliers. * These details are only rough guide values. They should be regarded as a material specification and are no substitute for a suitability test. Please see our datasheets for further details. HF = Halogenfree LFH = Limited Fire Hazard RoHS = Restriction of Hazardous Substances 24 Further information at www.HellermannTyton.com/fixings Date of issue: October 2015