Cable Ties and Fixings 1.7 Cable Tie Mounts Self Adhesive, Screw Fixing Cable Tie Mounts Where speed, simplicity and a rm xing base are required these self adhesive clips are ideal. Particularly suitable for use in control cabinets, telecoms equipment or domestic appliances where the use of holes, screws or nuts and bolts are impractical or undesirable. Features and Benets Screw or self-adhesive versions Simple to install with a screw or bolt Excellent security, particularly in areas of high vibration Maximum adhesive surface area to achieve high pull-off force 4-way entry for cable tie for quicker and more exible installation Cable Tie Mounts MB and TY. For more information on the types of adhesive please see page 73. Cable Tie Mounts MB2A Cable Tie Mounts MB3-5(A) Cable Tie Mounts MB4CA Cable Tie Mounts MB3A MB-Series Square-Cut, self adhesive, screwable Width Length Height Hole Strap Width Pack TYPE (W) (L) (H) (FH) max. (G) Material Colour Adhesive Cont. Article-No. MB2A 13.0 13.0 4.1 - 2.7 PA66 Natural (NA) Synthetic rubber 100 151-01802 19.0 19.0 3.8 3.1 4.1 PA66 Black (BK) Synthetic rubber 100 151-28320 MB3A 19.0 19.0 3.8 3.1 4.1 PA66 Natural (NA) Synthetic rubber 100 151-28349 MB4A3 28.0 28.0 4.7 4.0 5.4 PA66 Black (BK) Acrylate 100 151-28430 28.0 28.0 4.7 4.0 5.4 PA66 Black (BK) Synthetic rubber 100 151-28412 MB4A 28.0 28.0 4.7 4.0 5.4 PA66 Natural (NA) Synthetic rubber 100 151-28469 MB4CAS 29.0 29.0 5.7 4.2 5.4 PA66 Natural (NA) Synthetic rubber 100 151-28449 MB4CA 29.0 29.0 5.7 4.2 5.4 PA66 Natural (NA) Synthetic rubber 100 151-28459 MB5A 37.7 37.7 7.1 4.8 8.9 PA66 White (WH) Synthetic rubber 100 151-28529 MB5A3 38.0 38.0 6.4 4.7 10.0 PA66 Black (BK) Acrylate 100 151-28530 All dimensions in mm. Subject to technical changes. Minimum Order Quantity (MOQ) may differ from package content. Other packaging options may also be available. MB-Series Square-Cut, screwable Width Length Height Hole Strap Width Pack TYPE (W) (L) (H) (FH) max. (G) Material Colour Cont. Article-No. MB3 19.0 19.0 3.8 3.1 4.1 PA66 Natural (NA) 100 151-28359 MB4 28.0 28.0 4.7 4.0 5.4 PA66 Natural (NA) 100 151-28479 MB5 37.7 37.7 6.2 4.8 8.9 PA66 White (WH) 100 151-00324 All dimensions in mm. Subject to technical changes. Minimum Order Quantity (MOQ) may differ from package content. Other packaging options may also be available. Please note Not all products listed on this page may have this approval. For product specic approvals please refer to the Appendix. Further information and products at www.HellermannTyton.co.uk/a75 75 Date of issue: January 2014Cable Ties and Fixings 1.1 Material Information Material Specication Overview Natural Corrosion resistant Aluminium-alloy AL -40 C to +180 C (NA) Antimagnetic Black Weather-resistant Chloroprene CR -20 C to +80 C (BK) High yield strength Resistance to radioactivity Ethylenterauori- UV- resistant, not moisture sentitive E/TFE -80 C to +170 C Blue (BU) UL94 V0 neethylen Good chemical resistance to: acids, bases, oxidizing agents Limited brittleness sensitivity -40 C to +90 C, Natural Flexible at low temperature Polyacetal POM UL94 HB (+110 C, 500 h) (NA) Not moisture sensitive Robust on impacts Bio-plastic, derived from vegetable oil Strong impact resistance at low temperature -40 C to +85 C, Black Polyamide 11 PA11 UL94 HB Very low moisture absorption (+105 C, 500 h) (BK) Weather-resistant Good chemical resistance Good chemical resistance to: -40 C to +85 C, Black Polyamide 12 PA12 UL94 HB acids, bases, oxidizing agents (+105 C, 500 h) (BK) UV- resistant Natural -40 C to +150 C Resistance to high temperatures (NA), Polyamide 4.6 PA46 (5000 h), +195 C UL94 V2 Very moisture sensitive Grey (500 h) Low smoke sensitive (GY) Black Polyamide 6 PA6 -40 C to +80 C UL94 V2 High yield strength (BK) Black -40 C to +85 C, (BK), Polyamide 6.6 PA66 UL94 V2 High yield strength (+105 C, 500 h) Natural (NA) Polyamide 6.6, PA66GF13, Black Good resistance to: lubricants, vehicle fuel, salt -40 C to +105 C UL94 HB Glassbre reinforced PA66GF15 (BK) water and many solvents Polyamide 6.6 High yield strength Black heat and UV sta- PA66HSW -40 C to +105 C UL94 V2 Modied elevated max. temperature (BK) bilised UV-resistant Black Polyamide 6.6 (BK), High yield strength PA66HS -40 C to +105 C UL94 V2 Heat Stabilised Natural Modied elevated max. temperature (NA) Polyamide 6.6 Limited brittleness sensitivity Black High Imp. Mod., PA66HIRHS -40 C to +105 C UL94 HB Higher exibility at low temperature (BK) Heat Stab. Modied elevated max. temperature Polyamide 6.6 -40 C to +80 C, Black Limited brittleness sensitivity High Imp. Mod. PA66HIR(S) UL94 HB (+105 C, 500 h) (BK) Higher exibility at low temperature scan black Polyamide 6.6 -40 C to +80 C, Black Limited brittleness sensitivity High Impact Mo- PA66HIR UL94 HB (+105 C, 500 h) (BK) Higher exibility at low temperature died Tefzel is a registered trademark of DuPont. **More colours on request. General linguistic usage for cable ties made from raw material E/TFE is Tefzel-Tie. In additon to Tefzel from DuPont HellermannTyton is also using equivalent E/TFE raw material from other suppliers. * These details are only rough guide values. They should be regarded as a material specication and are no substitute for a suitability test. Please see our datasheets for further details. = Minimum Tensile Strength 22 Further information and products at www.HellermannTyton.co.uk/a22 Material Shortcut Operating Temperature Colour** Flammability Material Properties* Date of issue: January 2014