Cable Ties and Fixings 1.7 Cable Tie Mounts Mounting Plates for Screw Fixing MP-Series MSMP-Series Many applications require each cable run to be rmly held in place but separately from adjacent cable runs (example - control cabinets, machinery and military systems). The MP series of mounts helps to achieve this. Features and Benets Allow multiple cables to be run in parallel Simple to x with two screws Cables are xed by using a cable tie through any combination of the available slots Mounting plates types MP and MSMP. Material specication please see page 22. Mounting Plates Types MP and MSMP Mounting Plates Types MP and MSMP Width Length Height Hole Strap Width No. of Pack TYPE (W) (L) (H) (FH) max. (G) bundles Material Colour Cont. Article-No. MP2M3 12.7 76.2 3.2 3.7 5.2 2 PA66 Natural (NA) 100 151-24219 MP3M3 12.7 108.0 3.2 3.7 5.2 3 PA66 Natural (NA) 100 151-24319 MP4M3 12.7 139.8 3.2 3.7 5.2 4 PA66 Natural (NA) 100 151-24419 MP5M3 12.7 171.6 3.2 3.7 5.2 5 PA66 Natural (NA) 100 151-24519 MSMP5/10 15.8 204.5 5.3 5.1 7.6 5 PA66 Natural (NA) 100 151-25519 MSMP6/6 15.8 244.0 5.3 3.8 7.6 6 PA66 Natural (NA) 100 151-25619 MSMP4 15.9 167.0 5.2 5.1 8.2 4 PA66 Natural (NA) 500 150-83499 All dimensions in mm. Subject to technical changes. Minimum Order Quantity (MOQ) may differ from package content. Other packaging options may also be available. Please note Not all products listed on this page may have this approval. For product specic approvals please refer to the Appendix. 86 Further information and products at www.HellermannTyton.co.uk/a86 Date of issue: January 2014Cable Ties and Fixings 1.1 Material Information Material Specication Overview Natural Corrosion resistant Aluminium-alloy AL -40 C to +180 C (NA) Antimagnetic Black Weather-resistant Chloroprene CR -20 C to +80 C (BK) High yield strength Resistance to radioactivity Ethylenterauori- UV- resistant, not moisture sentitive E/TFE -80 C to +170 C Blue (BU) UL94 V0 neethylen Good chemical resistance to: acids, bases, oxidizing agents Limited brittleness sensitivity -40 C to +90 C, Natural Flexible at low temperature Polyacetal POM UL94 HB (+110 C, 500 h) (NA) Not moisture sensitive Robust on impacts Bio-plastic, derived from vegetable oil Strong impact resistance at low temperature -40 C to +85 C, Black Polyamide 11 PA11 UL94 HB Very low moisture absorption (+105 C, 500 h) (BK) Weather-resistant Good chemical resistance Good chemical resistance to: -40 C to +85 C, Black Polyamide 12 PA12 UL94 HB acids, bases, oxidizing agents (+105 C, 500 h) (BK) UV- resistant Natural -40 C to +150 C Resistance to high temperatures (NA), Polyamide 4.6 PA46 (5000 h), +195 C UL94 V2 Very moisture sensitive Grey (500 h) Low smoke sensitive (GY) Black Polyamide 6 PA6 -40 C to +80 C UL94 V2 High yield strength (BK) Black -40 C to +85 C, (BK), Polyamide 6.6 PA66 UL94 V2 High yield strength (+105 C, 500 h) Natural (NA) Polyamide 6.6, PA66GF13, Black Good resistance to: lubricants, vehicle fuel, salt -40 C to +105 C UL94 HB Glassbre reinforced PA66GF15 (BK) water and many solvents Polyamide 6.6 High yield strength Black heat and UV sta- PA66HSW -40 C to +105 C UL94 V2 Modied elevated max. temperature (BK) bilised UV-resistant Black Polyamide 6.6 (BK), High yield strength PA66HS -40 C to +105 C UL94 V2 Heat Stabilised Natural Modied elevated max. temperature (NA) Polyamide 6.6 Limited brittleness sensitivity Black High Imp. Mod., PA66HIRHS -40 C to +105 C UL94 HB Higher exibility at low temperature (BK) Heat Stab. Modied elevated max. temperature Polyamide 6.6 -40 C to +80 C, Black Limited brittleness sensitivity High Imp. Mod. PA66HIR(S) UL94 HB (+105 C, 500 h) (BK) Higher exibility at low temperature scan black Polyamide 6.6 -40 C to +80 C, Black Limited brittleness sensitivity High Impact Mo- PA66HIR UL94 HB (+105 C, 500 h) (BK) Higher exibility at low temperature died Tefzel is a registered trademark of DuPont. **More colours on request. General linguistic usage for cable ties made from raw material E/TFE is Tefzel-Tie. In additon to Tefzel from DuPont HellermannTyton is also using equivalent E/TFE raw material from other suppliers. * These details are only rough guide values. They should be regarded as a material specication and are no substitute for a suitability test. Please see our datasheets for further details. = Minimum Tensile Strength 22 Further information and products at www.HellermannTyton.co.uk/a22 Material Shortcut Operating Temperature Colour** Flammability Material Properties* Date of issue: January 2014