Cable Ties and Fixings 1.6 Cable Ties With Fixing Elements 1-Piece Fixing Ties for Weld Studs in the strap Features and Benets For 5 mm studs or 5 mm ISO threaded studs Soft-push versions for easy assembly, without tool Eyelet allows excess tail to be tucked neatly away With the RT50RS5 and the SB14/172 you can mount pipes or cables to a T50RS5, RT50RS weld stud. Width Length Height Bundle TYPE (W) (L) (H2) max. Material Colour Article-No. T50RS5 4.6 190.0 14.5 40.0 222 PA66 Black (BK) 111-07110 All dimensions in mm. Subject to technical changes. 1-Piece Fixing Ties with Mounting Head for Screws This range of one piece cable ties have a built in mounting hole and once fastened around the cables it can be simply secured to the panel with a screw or bolt. The tie is rst tted to the panel and then the cables can be added. Features and Benets One-piece bundling and xing tie Quick and easy installation The mounting head ties can be easily screwed onto a panel. Width Length Bundle Hole TYPE (W) (L) max. (FH) Material Colour Article-No. 2.5 110.0 20.0 80 3.1 PA66 Black (BK) 113-01810 T18MR 2.5 110.0 20.0 80 3.1 PA66 Natural (NA) 113-01819 3.5 160.0 32.0 135 4.3 PA66 Natural (NA) 113-03019 T30MR9 3.5 160.0 32.0 135 4.3 PA66HS Black (BK) 113-03010 4.6 165.0 32.0 225 5.3 PA66 Natural (NA) 113-05819 T50MS 4.6 165.0 32.0 225 5.3 PA66 Black (BK) 113-05820 4.7 215.0 45.0 225 5.4 PA66W Black (BK) 113-05060 T50MR 4.7 215.0 45.0 225 5.4 PA66 Natural (NA) 113-05019 4.7 215.0 45.0 225 5.4 PA66 Black (BK) 113-05010 T50ML 4.7 390.0 100.0 225 5.5 PA66 Natural (NA) 113-05419 7.6 395.0 102.0 535 6.5 PA66HIRHSUV Black (BK) 113-12060 T120MR 7.6 395.0 102.0 535 6.5 PA66HS Black (BK) 113-12020 7.6 395.0 102.0 535 6.5 PA66 Natural (NA) 113-12029 All dimensions in mm. Subject to technical changes. Further information and products at www.HellermannTyton.co.uk/a69 69 Date of issue: January 2014Cable Ties and Fixings 1.1 Material Information Material Specication Overview Natural Corrosion resistant Aluminium-alloy AL -40 C to +180 C (NA) Antimagnetic Black Weather-resistant Chloroprene CR -20 C to +80 C (BK) High yield strength Resistance to radioactivity Ethylenterauori- UV- resistant, not moisture sentitive E/TFE -80 C to +170 C Blue (BU) UL94 V0 neethylen Good chemical resistance to: acids, bases, oxidizing agents Limited brittleness sensitivity -40 C to +90 C, Natural Flexible at low temperature Polyacetal POM UL94 HB (+110 C, 500 h) (NA) Not moisture sensitive Robust on impacts Bio-plastic, derived from vegetable oil Strong impact resistance at low temperature -40 C to +85 C, Black Polyamide 11 PA11 UL94 HB Very low moisture absorption (+105 C, 500 h) (BK) Weather-resistant Good chemical resistance Good chemical resistance to: -40 C to +85 C, Black Polyamide 12 PA12 UL94 HB acids, bases, oxidizing agents (+105 C, 500 h) (BK) UV- resistant Natural -40 C to +150 C Resistance to high temperatures (NA), Polyamide 4.6 PA46 (5000 h), +195 C UL94 V2 Very moisture sensitive Grey (500 h) Low smoke sensitive (GY) Black Polyamide 6 PA6 -40 C to +80 C UL94 V2 High yield strength (BK) Black -40 C to +85 C, (BK), Polyamide 6.6 PA66 UL94 V2 High yield strength (+105 C, 500 h) Natural (NA) Polyamide 6.6, PA66GF13, Black Good resistance to: lubricants, vehicle fuel, salt -40 C to +105 C UL94 HB Glassbre reinforced PA66GF15 (BK) water and many solvents Polyamide 6.6 High yield strength Black heat and UV sta- PA66HSW -40 C to +105 C UL94 V2 Modied elevated max. temperature (BK) bilised UV-resistant Black Polyamide 6.6 (BK), High yield strength PA66HS -40 C to +105 C UL94 V2 Heat Stabilised Natural Modied elevated max. temperature (NA) Polyamide 6.6 Limited brittleness sensitivity Black High Imp. Mod., PA66HIRHS -40 C to +105 C UL94 HB Higher exibility at low temperature (BK) Heat Stab. Modied elevated max. temperature Polyamide 6.6 -40 C to +80 C, Black Limited brittleness sensitivity High Imp. Mod. PA66HIR(S) UL94 HB (+105 C, 500 h) (BK) Higher exibility at low temperature scan black Polyamide 6.6 -40 C to +80 C, Black Limited brittleness sensitivity High Impact Mo- PA66HIR UL94 HB (+105 C, 500 h) (BK) Higher exibility at low temperature died Tefzel is a registered trademark of DuPont. **More colours on request. General linguistic usage for cable ties made from raw material E/TFE is Tefzel-Tie. In additon to Tefzel from DuPont HellermannTyton is also using equivalent E/TFE raw material from other suppliers. * These details are only rough guide values. They should be regarded as a material specication and are no substitute for a suitability test. Please see our datasheets for further details. = Minimum Tensile Strength 22 Further information and products at www.HellermannTyton.co.uk/a22 Material Shortcut Operating Temperature Colour** Flammability Material Properties* Date of issue: January 2014