Cable Ties and Fixings 1.6 Cable Ties With Fixing Elements 1-Piece Fixing Ties with rivet, releasable Simply drill an 8 mm hole and knock in the peg. Used to fasten cables, pipes or hoses in place. Features and Benets One-piece for xing to brick, cement or wood Practical for the construction industry Time saving and versatile Depth of drill hole: 13.0 mm Wall plug tie in application. WPT230 Width Length Bundle Hole TYPE (W) (L) max. (FH) Material Colour Article-No. WPT230 8.0 230.0 59.0 8.0 PA66HIR Black (BK) 126-00020 All dimensions in mm. Subject to technical changes. 1-Piece Fixing Tie with Self Adhesive Socket Material specication please see page 22. Features and Benets Bundling and xing solution Ideal combination of materials and design Different positions of the xing anchor are available to t installation space T18RSA T18RSA Width Length Bundle TYPE (W) (L) max. Material Colour Article-No. T18RSA 2.5 100.0 16.0 80 PA66 Natural (NA) 148-00001 All dimensions in mm. Subject to technical changes. 72 Further information and products at www.HellermannTyton.co.uk/a72 Date of issue: January 2014Cable Ties and Fixings 1.1 Material Information Material Specication Overview Natural Corrosion resistant Aluminium-alloy AL -40 C to +180 C (NA) Antimagnetic Black Weather-resistant Chloroprene CR -20 C to +80 C (BK) High yield strength Resistance to radioactivity Ethylenterauori- UV- resistant, not moisture sentitive E/TFE -80 C to +170 C Blue (BU) UL94 V0 neethylen Good chemical resistance to: acids, bases, oxidizing agents Limited brittleness sensitivity -40 C to +90 C, Natural Flexible at low temperature Polyacetal POM UL94 HB (+110 C, 500 h) (NA) Not moisture sensitive Robust on impacts Bio-plastic, derived from vegetable oil Strong impact resistance at low temperature -40 C to +85 C, Black Polyamide 11 PA11 UL94 HB Very low moisture absorption (+105 C, 500 h) (BK) Weather-resistant Good chemical resistance Good chemical resistance to: -40 C to +85 C, Black Polyamide 12 PA12 UL94 HB acids, bases, oxidizing agents (+105 C, 500 h) (BK) UV- resistant Natural -40 C to +150 C Resistance to high temperatures (NA), Polyamide 4.6 PA46 (5000 h), +195 C UL94 V2 Very moisture sensitive Grey (500 h) Low smoke sensitive (GY) Black Polyamide 6 PA6 -40 C to +80 C UL94 V2 High yield strength (BK) Black -40 C to +85 C, (BK), Polyamide 6.6 PA66 UL94 V2 High yield strength (+105 C, 500 h) Natural (NA) Polyamide 6.6, PA66GF13, Black Good resistance to: lubricants, vehicle fuel, salt -40 C to +105 C UL94 HB Glassbre reinforced PA66GF15 (BK) water and many solvents Polyamide 6.6 High yield strength Black heat and UV sta- PA66HSW -40 C to +105 C UL94 V2 Modied elevated max. temperature (BK) bilised UV-resistant Black Polyamide 6.6 (BK), High yield strength PA66HS -40 C to +105 C UL94 V2 Heat Stabilised Natural Modied elevated max. temperature (NA) Polyamide 6.6 Limited brittleness sensitivity Black High Imp. Mod., PA66HIRHS -40 C to +105 C UL94 HB Higher exibility at low temperature (BK) Heat Stab. Modied elevated max. temperature Polyamide 6.6 -40 C to +80 C, Black Limited brittleness sensitivity High Imp. Mod. PA66HIR(S) UL94 HB (+105 C, 500 h) (BK) Higher exibility at low temperature scan black Polyamide 6.6 -40 C to +80 C, Black Limited brittleness sensitivity High Impact Mo- PA66HIR UL94 HB (+105 C, 500 h) (BK) Higher exibility at low temperature died Tefzel is a registered trademark of DuPont. **More colours on request. General linguistic usage for cable ties made from raw material E/TFE is Tefzel-Tie. In additon to Tefzel from DuPont HellermannTyton is also using equivalent E/TFE raw material from other suppliers. * These details are only rough guide values. They should be regarded as a material specication and are no substitute for a suitability test. Please see our datasheets for further details. = Minimum Tensile Strength 22 Further information and products at www.HellermannTyton.co.uk/a22 Material Shortcut Operating Temperature Colour** Flammability Material Properties* Date of issue: January 2014