20008 Helukabel

TRONIC-CY (LiY-CY) flexible, Cu-screened, colour coded to DIN 47100, EMC-preferred type, meter marking Technical data Cable structure Properties Special PVC data screened cables, adapted Bare copper, fine wire conductors for Extensively oil resistant, oil-/ chemical to DIN VDE 0,5 mm to DIN VDE 0295 cl. 5 and Resistance - see table Technical 0812 IEC 60228 cl. 5 Informations Temperature range Conductor make-up for PVC self-extinguishing and flame retardant flexing -5 C to +80 C 0,14 mm = 18x0,1 mm according to VDE 0482-332-1-2, DIN EN fixed installation -40 C to +80 C 0,25 mm = 14x0,15 mm 60332-1-2/ IEC 60332-1 (equivalent Nominal voltage 0,34 mm = 7x0,25 mm DIN VDE 0472 part 804 test method B) 0,14 mm = 350 V Special PVC core insulation TI2, to The materials used in manufacture are 0,25 mm = 500 V DIN VDE 0281 part 1 cadmium-free and contain no silicone and Test voltage Cores stranded in layers with optimal free from substances harmful to the core/core 1200 V lay-length wetting properties of lacquers core/screen 800 V Colour coded to DIN 47100, but without colour repetition Breakdown voltage min. 2400 V Note Core wrapping with foil Insulation resistance HELUKABEL -TRONIC-CY is also available in min. 200 MOhm x km Drain-wire, tinned paired version Capacitance (approx.-value) at 800 Hz Tinned, copper braided screen, approx. (e.g. HELUKABEL -PAAR-TRONIC-CY core/core at 0,14 mm = 120 pF/m 85% coverage 16x2x0,14 mm). core/core 0,25 mm = 150 pF/m Special PVC outer sheath TM2, to For 1 core cable screen of helically wound. core/screen at 0,14 mm = 240 pF/m DIN VDE 0281 part 1 unscreened analogue type: core/screen 0,25 mm = 270 pF/m Colour grey (RAL 7001) sBee page 4 TRONIC (LiYY), Load (A) According to different with meter marking, change-over in 2011 cross-sections, see table Technical Information Inductance approx. 0,65 mH/km Impedance approx. 78 Ohm Coupling resistance max. 250 Ohm/km Minimum bending radius flexing 10x cable fixed installation 5x cable Radiation resistance 6 up to 80x10 cJ/kg (up to 80 Mrad) Application These screened cables are used for flexible use with free movement without tensile stress or forced movements in dry, moist and wet rooms but not suitable for open air, wherever the construction requirements call for a minimum outer diameter, TRONIC is the suitable cable to use. This applies especially to such areas as tool making and machine industries as well as electronic, computer, measurement and control sectors. The extremely small outer diameter make suitable for miniature plugs etc. EMC = Electromagnetic compatibillity To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG. Part no. No.cores x Outer Cop. Weight AWG-No. Part no. No.cores x Outer Cop. Weight AWG-No. cross-sec. approx. mm weight approx. cross-sec. approx. mm weight approx. mm kg / km kg / km mm kg / km kg / km 20139 1 x 0,14 2,5 6,1 16,0 26 20015 24 x 0,14 8,3 62,0 131,0 26 20001 2 x 0,14 3,7 12,0 20,0 26 20091 25 x 0,14 8,5 61,0 136,0 26 20002 3 x 0,14 3,9 13,0 27,0 26 20016 27 x 0,14 8,5 65,0 142,0 26 20003 4 x 0,14 4,1 14,5 32,0 26 20017 30 x 0,14 9,3 69,0 157,0 26 20004 5 x 0,14 4,4 15,5 37,0 26 20018 32 x 0,14 9,6 76,0 163,0 26 20005 6 x 0,14 4,9 18,2 42,0 26 20019 36 x 0,14 9,9 83,0 182,0 26 20006 7 x 0,14 4,9 19,0 48,0 26 20020 40 x 0,14 10,2 88,0 209,0 26 20007 8 x 0,14 5,2 21,3 55,0 26 20021 42 x 0,14 10,5 94,0 217,0 26 20008 10 x 0,14 6,2 28,7 65,0 26 20022 44 x 0,14 11,2 110,0 226,0 26 20009 12 x 0,14 6,2 30,5 77,0 26 20023 48 x 0,14 11,3 115,0 240,0 26 20010 14 x 0,14 6,6 32,0 79,0 26 20024 52 x 0,14 11,8 124,0 270,0 26 20011 16 x 0,14 6,9 43,2 89,0 26 20025 56 x 0,14 12,1 132,0 320,0 26 20012 18 x 0,14 7,2 51,0 103,0 26 20026 61 x 0,14 12,4 146,0 370,0 26 20013 20 x 0,14 7,7 55,0 116,0 26 20027 80 x 0,14 14,1 226,0 510,0 26 20014 21 x 0,14 7,9 56,0 120,0 26 20028 100 x 0,14 15,6 267,0 580,0 26 Continuation B 9TRONIC-CY (LiY-CY) flexible, Cu-screened, colour coded to DIN 47100, EMC-preferred type, meter marking Part no. No.cores x Outer Cop. Weight AWG-No. Part no. No.cores x Outer Cop. Weight AWG-No. cross-sec. approx. mm weight approx. cross-sec. approx. mm weight approx. mm kg / km kg / km mm kg / km kg / km 20084 1 x 0,25 2,9 7,2 27,0 24 16012 16 x 0,5 10,6 129,0 210,0 20 B 20029 2 x 0,25 4,2 15,8 31,0 24 16013 18 x 0,5 10,7 152,0 217,0 20 20030 3 x 0,25 4,3 18,6 36,0 24 16526 19 x 0,5 11,2 156,0 246,0 20 20031 4 x 0,25 4,7 22,0 40,0 24 16014 20 x 0,5 11,7 173,0 275,0 20 20032 5 x 0,25 5,3 26,5 51,0 24 16015 24 x 0,5 12,6 236,0 337,0 20 20083 6 x 0,25 5,7 32,4 58,0 24 16016 25 x 0,5 12,7 250,0 351,0 20 20033 7 x 0,25 5,7 35,0 64,0 24 16527 27 x 0,5 12,7 265,0 373,0 20 20034 8 x 0,25 6,3 42,1 82,0 24 16017 30 x 0,5 14,1 297,0 396,0 20 20035 10 x 0,25 7,2 49,9 85,0 24 16018 32 x 0,5 14,6 301,0 431,0 20 20036 12 x 0,25 7,3 58,0 90,0 24 16164 34 x 0,5 15,3 312,0 440,0 20 20037 14 x 0,25 7,9 62,0 144,0 24 16019 36 x 0,5 15,3 320,0 445,0 20 20038 16 x 0,25 8,3 67,0 110,0 24 16528 37 x 0,5 15,3 325,0 458,0 20 20039 18 x 0,25 9,1 78,0 142,0 24 16020 40 x 0,5 15,8 345,0 470,0 20 20086 19 x 0,25 9,1 79,0 146,0 24 16021 50 x 0,5 18,1 407,0 570,0 20 20040 20 x 0,25 9,4 88,0 152,0 24 16022 61 x 0,5 19,1 508,0 650,0 20 20041 21 x 0,25 9,4 91,0 150,0 24 16023 80 x 0,5 21,9 690,0 780,0 20 20042 24 x 0,25 10,0 96,0 163,0 24 16024 100 x 0,5 24,3 814,0 990,0 20 20092 25 x 0,25 10,1 99,0 169,0 24 16025 1 x 0,75 3,8 19,0 41,0 18 20043 27 x 0,25 10,1 122,0 176,0 24 16026 2 x 0,75 5,8 38,0 59,0 18 20044 30 x 0,25 11,1 132,0 189,0 24 16027 3 x 0,75 6,3 50,0 66,0 18 20045 32 x 0,25 11,5 138,0 204,0 24 16028 4 x 0,75 6,8 57,0 77,0 18 20046 36 x 0,25 11,9 146,0 219,0 24 16029 5 x 0,75 7,3 70,0 93,0 18 20087 37 x 0,25 11,9 152,0 230,0 24 16030 6 x 0,75 8,1 87,0 113,0 18 20047 40 x 0,25 12,4 157,0 247,0 24 16031 7 x 0,75 8,2 96,0 130,0 18 20048 42 x 0,25 12,8 160,0 269,0 24 16032 8 x 0,75 9,0 110,0 145,0 18 20049 44 x 0,25 13,6 164,0 292,0 24 16033 10 x 0,75 10,3 140,0 180,0 18 20050 48 x 0,25 13,7 164,0 317,0 24 16034 12 x 0,75 10,5 151,0 202,0 18 20051 52 x 0,25 14,1 175,0 330,0 24 16035 14 x 0,75 11,3 167,0 225,0 18 20052 56 x 0,25 14,5 189,0 343,0 24 16036 16 x 0,75 11,8 183,0 275,0 18 20053 61 x 0,25 15,1 204,0 365,0 24 16037 18 x 0,75 12,6 207,0 292,0 18 20054 80 x 0,25 17,1 387,0 480,0 24 16529 19 x 0,75 12,6 221,0 322,0 18 20055 100 x 0,25 19,1 505,0 605,0 24 16038 20 x 0,75 13,4 238,0 362,0 18 20088 1 x 0,34 3,2 13,5 24,0 22 16039 24 x 0,75 14,1 270,0 435,0 18 20056 2 x 0,34 5,0 18,0 30,0 22 16040 25 x 0,75 14,3 278,0 415,0 18 20057 3 x 0,34 5,2 22,0 37,0 22 16041 27 x 0,75 14,3 287,0 467,0 18 20058 4 x 0,34 5,6 28,0 48,0 22 16042 30 x 0,75 15,8 315,0 486,0 18 20059 5 x 0,34 6,0 31,0 54,0 22 16043 32 x 0,75 16,3 330,0 530,0 18 20085 6 x 0,34 6,7 45,0 61,0 22 16163 34 x 0,75 17,1 350,0 570,0 18 20060 7 x 0,34 6,7 51,0 67,0 22 16044 36 x 0,75 17,1 370,0 600,0 18 20061 8 x 0,34 7,2 54,0 81,0 22 16530 37 x 0,75 17,9 386,0 640,0 18 20062 10 x 0,34 8,4 65,0 103,0 22 16045 40 x 0,75 17,9 395,0 680,0 18 20063 12 x 0,34 8,5 70,0 110,0 22 16120 42 x 0,75 18,4 408,0 714,0 18 20064 14 x 0,34 9,0 81,0 153,0 22 16047 61 x 0,75 21,5 555,0 900,0 18 20065 16 x 0,34 9,6 88,0 159,0 22 16048 80 x 0,75 24,6 715,0 1200,0 18 20066 18 x 0,34 10,1 103,0 172,0 22 16049 100 x 0,75 27,2 910,0 1440,0 18 20089 19 x 0,34 10,1 106,0 181,0 22 16475 2 x 1 6,4 46,0 65,0 17 20067 20 x 0,34 10,7 112,0 191,0 22 16476 3 x 1 6,7 56,0 80,0 17 20068 21 x 0,34 10,7 116,0 199,0 22 16477 4 x 1 7,2 69,0 98,0 17 20069 24 x 0,34 11,3 129,0 229,0 22 16478 5 x 1 8,0 89,0 127,0 17 20093 25 x 0,34 11,5 120,0 241,0 22 16479 6 x 1 8,6 105,0 144,0 17 20070 27 x 0,34 11,5 138,0 258,0 22 16480 7 x 1 8,6 111,0 158,0 17 20071 30 x 0,34 12,6 158,0 290,0 22 16481 8 x 1 9,4 130,0 197,0 17 20072 32 x 0,34 13,0 163,0 305,0 22 16482 10 x 1 11,2 140,0 232,0 17 20073 36 x 0,34 13,7 178,0 330,0 22 16483 12 x 1 11,4 168,0 260,0 17 20090 37 x 0,34 13,7 192,0 348,0 22 16484 14 x 1 12,0 198,0 302,0 17 20074 40 x 0,34 14,2 198,0 364,0 22 16485 16 x 1 12,8 218,0 346,0 17 20075 42 x 0,34 14,8 203,0 389,0 22 16486 19 x 1 13,6 268,0 412,0 17 20076 44 x 0,34 15,4 214,0 414,0 22 16487 24 x 1 15,2 320,0 493,0 17 20077 48 x 0,34 15,6 227,0 420,0 22 16488 27 x 1 15,4 360,0 562,0 17 20078 52 x 0,34 16,2 242,0 450,0 22 16489 37 x 1 18,3 485,0 790,0 17 20079 56 x 0,34 16,6 267,0 480,0 22 16500 2 x 1,5 7,3 63,0 88,0 16 20080 61 x 0,34 17,1 295,0 520,0 22 16501 3 x 1,5 7,6 76,0 100,0 16 20081 80 x 0,34 19,4 524,0 580,0 22 16502 4 x 1,5 8,3 98,0 126,0 16 20082 100 x 0,34 21,7 620,0 694,0 22 16503 5 x 1,5 9,2 116,0 160,0 16 16001 1 x 0,5 3,6 15,0 40,0 20 16504 6 x 1,5 9,9 140,0 192,0 16 16002 2 x 0,5 5,5 29,0 45,0 20 16505 7 x 1,5 9,9 152,0 208,0 16 16003 3 x 0,5 5,7 39,0 55,0 20 16506 8 x 1,5 10,8 172,0 244,0 16 16004 4 x 0,5 6,3 46,0 61,0 20 16507 10 x 1,5 13,0 193,0 315,0 16 16005 5 x 0,5 6,8 52,0 76,0 20 16508 12 x 1,5 13,0 254,0 338,0 16 16006 6 x 0,5 7,3 66,0 89,0 20 16509 14 x 1,5 13,9 272,0 383,0 16 16007 7 x 0,5 7,3 68,0 98,0 20 16510 16 x 1,5 14,9 285,0 424,0 16 16008 8 x 0,5 8,0 80,0 117,0 20 16511 19 x 1,5 15,6 387,0 506,0 16 16009 10 x 0,5 9,4 93,0 135,0 20 16512 24 x 1,5 17,7 448,0 690,0 16 16010 12 x 0,5 9,6 117,0 157,0 20 16513 27 x 1,5 17,9 506,0 781,0 16 16011 14 x 0,5 10,1 122,0 190,0 20 16514 37 x 1,5 21,2 682,0 941,0 16 Dimensions and specifications may be changed without prior notice. (RB01) B 10