HELUFLON -FEP-6Y fluorinated polymeric materials, single core, -100C to +205C Technical data Cable structure Properties Fluorinated polymeric insulation FEP Stranded copper wire, bare, tinned, silver Higher insulation resistance (Fluorethylenepropylene) Make-up fine wire stranded to Low dielectric loss Temperature range DIN VDE 0295 cl. 5, BS 6360 cl. 5 and Not flammable -100 C to +205 C IEC 60228 cl. 5 Min. 20 kV dielectric strength (up to +230 C for short time) Core insulation FEP-HELUFLON Resistant to micro-cultures Nominal voltage 600 V Do not permit any fungus-formation Test voltage 2500 V Absolute ozone resistant Insulation resistance Absolute weather resistant min. 2 GOhm x km Water absorption <0,01% Minimum bending radius Minimal water vapour permeability (approx. flexing 10x cable 0,18 mgr/cm in 24 hours) fixed installation 4x cable self-extinguishing and flame retardant Radiation resistance according to VDE 0482-332-1-2, DIN EN 6 up to 1x10 cJ/kg (up to 1 Mrad) 60332-1-2/ IEC 60332-1 (equivalent Conductor temperature range DIN VDE 0472 part 804 test method B) plain copper +130 C The materials used in manufacture are tinned copper +180 C cadmium-free and contain no silicone and silver pl. copper +200 C free from substances harmful to the wetting properties of lacquers Note AWG sizes are approximate equivalent values. The actual cross-section is in mm. Please complete the above part-no. for the colour required using the following table: 1 = black, 2 = red, 3 = blue, 4 = brown, 5 = white, 6 = transparent, 7 = twintone, 8 = other colours Application Teflon cables are predominantly used for installing in control cabinets subjected to high thermal effects as well as in brickworks, heaters, kitchen fitments and measuring appliances as well as in the chemical industry. These cables are non-flammable and resistant to acids, alkalis, solvents, oil and petrol. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG. Copper wire, tinned Copper wire, bare Part no. No.cores x Outer Cop. Weight AWG-No. Part no. No.cores x Outer Cop. Weight AWG-No. cross-sec. approx. mm weight approx. cross-sec. approx. mm weight approx. mm kg / km kg / km mm kg / km kg / km 2551x 1 x 0,14 1,0 1,35 2,6 26 2496 1 x 2,5 2,65 24,0 26,4 14 2552x 1 x 0,25 1,16 2,4 4,1 24 2497 1 x 4 3,2 38,0 43,1 12 2553x 1 x 0,5 1,42 4,8 8,0 20 2498 1 x 6 4,4 58,0 65,9 10 2554x 1 x 0,75 1,62 7,2 9,7 18 2499 1 x 10 5,3 96,0 115,0 8 2555x 1 x 1 1,9 9,6 12,7 17 2037 1 x 16 8,0 154,0 175,0 6 2556x 1 x 1,5 2,2 14,4 17,9 16 copper wires, silvered 2557x 1 x 2,5 2,65 24,0 26,4 14 2558x 1 x 4 3,2 38,0 43,1 12 Part no. No.cores x Outer Cop. Weight AWG-No. cross-sec. approx. mm weight approx. 2559x 1 x 6 4,4 58,0 65,9 10 mm kg / km kg / km 2560x 1 x 10 5,3 96,0 115,0 8 2026 1 x 0,14 1,0 1,35 2,6 26 2561x 1 x 16 8,0 154,0 175,0 6 2027 1 x 0,25 1,16 2,4 4,1 24 Copper wire, bare 2028 1 x 0,5 1,42 4,8 8,0 20 2029 1 x 0,75 1,62 7,2 9,7 18 Part no. No.cores x Outer Cop. Weight AWG-No. cross-sec. approx. mm weight approx. 2030 1 x 1 1,9 9,6 12,7 17 mm kg / km kg / km 2031 1 x 1,5 2,2 14,4 17,9 16 2490 1 x 0,14 1,0 1,35 2,6 26 2032 1 x 2,5 2,65 24,0 26,4 14 2491 1 x 0,25 1,16 2,4 4,1 24 2033 1 x 4 3,2 38,0 43,1 12 2492 1 x 0,5 1,42 4,8 8,0 20 2034 1 x 6 4,4 58,0 65,9 10 2493 1 x 0,75 1,62 7,2 9,7 18 2035 1 x 10 5,3 96,0 115,0 8 2494 1 x 1 1,9 9,6 12,7 17 2036 1 x 16 8,0 154,0 175,0 6 2495 1 x 1,5 2,2 14,4 17,9 16 Dimensions and specifications may be changed without prior notice. (RK01) K 27