PRELIMINARY Product Description Sheet EQ CL30 LED Flood 365 / 380 / 405 2139182 / 2139181 / 2139180 PRODUCT DESCRIPTION The CL30 LED Flood System is a high intensity flood system specially designed for curing Loctite UV and Visible Light Cure adhesives. The modular configuration consists of an LED head with connection cable, and controller (each ordered separately), and the system is offered in either 365, 380, or 405 nm wavelengths. Each CL30 head is equipped with 144 high power LEDs and integrated reflectors, providing uniform curing across a wide area (100 mm x 100 mm or 4 inches by 4 inches). The heads can also be stacked side by side in two directions further expanding the curing area for maximum flexibility. The expected lifetime of the LEDs is more than 20.000 hours under normal operating conditions. The CL30 system is compatible with manual work stations as well as automated production lines. It can be operated via a footswitch or a PLC and run in either timer or continuous mode. Product Properties Benefits: 2 High UV intensity Up to 1 W/cm - Lasts up to 10 times longer than LED heads stackable in two directions traditional arc lamps with negligible Expected LED life over 20,000 hours (30% output decay during duty cycle intensity decay) with proper handling - 100% of the emitted light is within the 100% duty cycle range of the curing spectra of the Instant on/off, no heat up or cool down adhesive (when compared to Mercury necessary vapor arc lamps) Optimal curing distance: 50 mm - Energy efficient, LEDs produce little Compact system with integrated air cooling wasted energy Requires LED Flood Controller, sold - Each LED head has been optimized for separately its specific wavelength (365 nm, 380 nm, Temperature and voltage monitor of LEDs 405 nm) - Air cooling system maintenance free EQ HM15 Volumetric Hotmelt Dispense System Technical Data: - Recommended working distance: 25 75 mm - Wavelength: 365, 380 or 405 nm - Peak Intensity (Distance 50 mm): >800 mW/cm for 365 nm >1250 mW/cm for 380 nm >1500 mW/cm for 405 nm - Evenness: Tolerance <30% (Distance 50 mm) - Noise level: <66 dBA (Distance 1 m) - Weight: 1.5 kg Intensity is measured at 25 spots, see diagram on the right. Measuring device: Radiometer / Dosimeter UV-A/B and UV-V, see optional accessories. Irradiation area layout Evenness is measured at nine different spots, shown on the right. Evenness = (max - min) / (max + min) Optional Accessories: LED Flood Controller 97104 (for one head), order no. 1359255 LED Flood Controller XXX (for up to four heads), order no. TBD LED Flood Chamber 97360 (for up to two heads), order code 1511839 UV Safety Glasses, yellow, recommended for 405 nm, order no. 1175128 Evenness mapping layout UV Safety Glasses, grey, recommended for 365 and 380 nm, order no. 1175128 Protection Gloves, white, 1 pair, order no. 376746 Radiometer / Dosimeter UV-A/B, for 365 and 380 nm, order no. 1390323 Radiometer / Dosimeter UV-V, for 405 nm, order no. 1265282 Items supplied: - CL30 LED Flood 365/380/405 - Connecting Cable Head to Controller