Safety Data Sheet according to (EC) No 1907/2006 Page 1 of 12 sds no. : 409123 V002.1 LOCTITE AA 3342 known as Loctite 3342 Revision: 26.03.2013 printing date: 17.01.2015 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier LOCTITE AA 3342 known as Loctite 3342 1.2. Relevant identified uses of the substance or mixture and uses advised against Intended use: Acrylic Adhesive 1.3. Details of the supplier of the safety data sheet Henkel Ltd Wood Lane End HP2 4RQ Hemel Hempstead Great Britain Phone: +44 1442 278000 Fax-no.: +44 1442 278071 ua-productsafety.uk uk.henkel.com 1.4. Emergency telephone number 24 Hours Emergency Tel: +44 (0)1442 278497 SECTION 2: Hazards identification 2.1. Classification of the substance or mixture Classification (DPD): Xi - Irritant R41 Risk of serious damage to eyes. R37/38 Irritating to respiratory system and skin. Sensitizing R43 May cause sensitisation by skin contact. 2.2. Label elements MSDS-No.: 409123 LOCTITE AA 3342 known as Loctite 3342 Page 2 of 12 V002.1 Label elements (DPD): Xi - Irritant Risk phrases: R37/38 Irritating to respiratory system and skin. R41 Risk of serious damage to eyes. R43 May cause sensitisation by skin contact. Safety phrases: S24/25 Avoid contact with skin and eyes. S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28 After contact with skin, wash immediately with plenty of water and soap. S37/39 Wear suitable gloves and eye/face protection. S51 Use only in well-ventilated areas. Contains: Methacrylic acid, N,N-(m-phenylene)dimaleimide, Tert-butyl perbenzoate 2.3. Other hazards This product contains a solid compound, which in powder form is classified as very toxic by inhalation. The product is not labelled accordingly as such exposure can be excluded under normal and foreseeable conditions. In the case that the product is used divergently under formation of aerosols, measures have to be observed to exclude inhalational exposure. Non corrosive to skin in accordance with the invitro test method, B40 skin corrosion - Human skin model assay, specified in Part B of Annex V to Directive 67/548/EEC. SECTION 3: Composition/information on ingredients