603, 50ML Henkel

Safety Data Sheet according to Regulation (EC) No 1907/2006 Page 1 of 20 SDS No. : 153475 V010.0 Revision: 11.05.2017 LOCTITE 603 printing date: 22.01.2018 Replaces version from: 24.05.2016 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier LOCTITE 603 Contains: 1-Methyltrimethylene dimethacrylate Hydroxypropyl methacrylate Acrylic acid 2,2 -Ethylenedioxydiethyl dimethacrylate Acetic acid, 2-phenylhydrazide 1.2. Relevant identified uses of the substance or mixture and uses advised against Intended use: Anaerobic Sealant 1.3. Details of the supplier of the safety data sheet Henkel Ltd Wood Lane End HP2 4RQ Hemel Hempstead Great Britain Phone: +44 1442 278000 Fax-no.: +44 1442 278071 ua-productsafety.uk henkel.com 1.4. Emergency telephone number 24 Hours Emergency Tel: +44 (0)1442 278497 SECTION 2: Hazards identification 2.1. Classification of the substance or mixture Classification (CLP): Skin corrosion/irritation Category 2 H315 Causes skin irritation. Skin sensitizer Category 1 H317 May cause an allergic skin reaction. Serious eye damage Category 1 H318 Causes serious eye damage. Specific target organ toxicity - single exposure Category 3 H335 May cause respiratory irritation. Target organ: respiratory tract irritation Chronic hazards to the aquatic environment Category 3 H412 Harmful to aquatic life with long lasting effects. MSDS-No.: 153475 LOCTITE 603 Page 2 of 20 V010.0 2.2. Label elements Label elements (CLP): Hazard pictogram: Signal word: Danger Hazard statement: H315 Causes skin irritation. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H335 May cause respiratory irritation. H412 Harmful to aquatic life with long lasting effects. Precautionary statement: ***For consumer use only: P101 If medical advice is needed, have product container or label at hand. P102 Keep out of reach of children. P501 Dispose of waste and residues in accordance with local authority requirements*** Precautionary statement: P261 Avoid breathing vapours. Prevention P273 Avoid release to the environment. P280 Wear protective gloves/eye protection. Precautionary statement: P302+P352 IF ON SKIN: Wash with plenty of soap and water. Response P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P333+P313 If skin irritation or rash occurs: Get medical advice/attention. 2.3. Other hazards Non corrosive to skin in accordance with the in vitro test method, B40 skin corrosion - Human skin model assay, equivalent to test method OECD 431 or based on analogy to similar products tested. Not fulfilling Persistent, Bioaccumulative and Toxic (PBT), very Persistent and very Bioaccumulative (vPvB) criteria. SECTION 3: Composition/information on ingredients 3.2. Mixtures General chemical description: Anaerobic Sealant