Bond-Ply 100 Thermally Conductive, Fiberglass Reinforced Pressure Sensitive Adhesive Tape Features and Benefits TYPICAL PROPERTIES OF BOND-PLY 100 PROPERTY IMPERIAL VALUE METRIC VALUE TEST METHOD Thermal impedance: 2 Color White White Visual 0.86C-in /W ( 100 psi) Reinforcement Carrier Fiberglass Fiberglass High bond strength to a variety of surfaces Thickness (inch) / (mm) 0.005, 0.008, 0.011 0.127, 0.203, 0.279 ASTM D374 Double-sided, pressure sensitive Temp. Resistance, 30 sec. (F) / (C) 392 200 adhesive tape Elongation (%45 to Warp & Fill) 70 70 ASTM D412 High performance, thermally conductive Tensile Strength (psi) / (MPa) 900 6 ASTM D412 acrylic adhesive CTE (ppm) 325 325 ASTM D3386 Can be used instead of heat-cure adhesive, Glass Transition (F) / (C) -22 -30 ASTM 1356 screw mounting or clip mounting Continuous Use Temp (F) / (C) -22 to 248 -30 to 120 ADHESION Lap Shear RT (psi) / (MPa) 100 0.7 ASTM D1002 Lap Shear after 5 hr 100C 200 1.4 ASTM D1002 Lap Shear after 2 min 200C 200 1.4 ASTM D1002 Static Dead Weight Shear (F) / (C) 302 150 PSTC 7 ELECTRICAL VALUE TEST METHOD Dielectric Breakdown Voltage - 0.005 (Vac) 3000 ASTM D149 Dielectric Breakdown Voltage - 0.008 (Vac) 6000 ASTM D149 Dielectric Breakdown Voltage - 0.011 (Vac) 8500 ASTM D149 Flame Rating V-OU.L.94 THERMAL Thermal Conductivity (W/m-K) 0.8 ASTM D5470 Typical Applications THERMAL PERFORMANCE vs PRESSURE Include: Pressure (psi) 10 25 50 100 200 Mount heat sink onto BGA graphic TO-220 Thermal Performance (C/W) 0.005 4.39 4.02 3.48 3.15 3.05 processor or drive processor TO-220 Thermal Performance (C/W) 0.008 5.11 4.69 4.53 4.45 4.38 Mount heat spreader onto power TO-220 Thermal Performance (C/W) 0.011 6.26 5.92 5.73 5.63 5.53 2 converter PCB or onto motor control PCB Thermal Impedance (C-in /W) 0.005 (1) 0.78 0.61 0.58 0.55 0.54 2 Thermal Impedance (C-in /W) 0.008 (1) 1.28 0.94 0.90 0.86 0.84 2 Configurations Available: Thermal Impedance (C-in /W) 0.011 (1) 2.47 1.22 1.19 1.14 1.11 1) The ASTM D5470 (Bergquist modified) test fixture was used.The recorded value includes interfacial thermal resistance.These Sheet form, roll form, and die-cut parts values are provided for reference only. Actual application performance is directly related to the surface roughness, flatness and pressure applied. Shelf Life: The double-sided, pressure Building a Part Number Standard Options sensitive adhesive used in Bond-Ply products BP100 0.008 00 1112 NA requires the use of dual liners to protect NA = Selected standard option. If not selecting a standard the surfaces from contaminants. Bergquist option, insert company name, drawing number, and revision level. recommends a 6-month shelf life at a maximum continuous storage temperature 11/250 = 11 x 250 rolls, or 00 = custom configuration of 35C, or 3-month shelf life at a maximum 00 = No adhesive continuous storage temperature of 45C, for maintenance of controlled adhesion to the Standard thicknesses available: 0.005 , 0.008 , 0.011 liner.The shelf life of the Bond-Ply material, BP100 = Bond-Ply 100 Material without consideration of liner adhesion Note: To build a part number, visit our website at www.bergquistcompany.com. (which is often not critical for manual assembly Bond-Ply :U.S. Patent 5,090,484 and others. processing), is recommended at 12 months from date of manufacture at a maximum continuous storage temperature of 60C. All statements, technical information and recommendations herein are based on tests we believe to be reliable, and THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED www.bergquistcompany.com WARRANTIES OF MARKETABILITY AND FITNESS FOR PURPOSE. Sellers and manufacturers only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product The Bergquist Company - The Bergquist Company - Europe The Bergquist Company - China for its intended use, and the user assumes all risks and liability whatsoever in connection therewith. NEITHER SELLER NOR North American Headquarters Bramenberg 9a, 3755 BT Eemnes Rm. 7C, Aihe Mansion MANUFACTURER SHALL BE LIABLE EITHER IN TORT OR IN CONTRACT FOR ANY LOSS OR DAMAGE, DIRECT, 18930 West 78th Street Netherlands No. 629 Ling Ling Road INCIDENTAL, OR CONSEQUENTIAL, INCLUDING LOSS OF PROFITS OR REVENUE ARISING OUT OF THE USE OR Chanhassen, MN 55317 Phone: 31-35-5380684 Shanghai, China 200030 THE INABILITY TO USE A PRODUCT. No statement, purchase order or recommendations by seller or purchaser not Phone: 800-347-4572 Fax: 31-35-5380295 Ph: 86-21-6464-2206 contained herein shall have any force or effect unless in an agreement signed by the officers of the seller and manufacturer. Fax: 952-835-0430 Fax: 86-21-6464-2209 PDS 10110 BP 100 0305 Section A Section B Section C Section D Section EX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for bergquist company manufacturer: Other Similar products are found below : SIL-PAD 2000 150MMX150MM SHEET GP2000S40-0.040-02-4/4 GPEMI1.0-0.060-01-0816 SPA2000-0.020-00-1012 TGP6000ULM- 0.125-12-0816 803265 GPEMI1.0-0.040-01-0816 GP3500ULM-G-0.100-12-0816 TGP12000ULM-0.080-00-0808 GP1500-0.160-02-0816 SIL-PAD K6 300MMX300MM SHEET GP1500-0.200-02-0816 SP980-0.009-00-1212 GPEMI1.0-0.100-01-0816 GPA3000-0.125-01-0816 TGP12000ULM-0.100-00-0808 TGP12000ULM-0.060-00-0808 TGP3000ULM-0.120-02-0816 803263 GP1000SF-0.100-02-0816 GPHC1000-0.010-02-0816 GP1500S30-0.100-02-0816 LF2000-00-00-30CC TGP3000ULM-0.100-02-0816 TGP12000ULM-0.125-00-0808 803269 2015-54 GPVOUS-0.080-00-4/4 SP1200-0.016-AC-1212 SPA2000-0.015-AC-1012 SPA1500-0.010-00-4/4 GPVOUS-0.160-AC- 0816 GP1500S30-0.250-02-0816 GP3500ULM-G-0.080-12-0816 GPVO-0.160-01-0816 GP1500S30-0.125-02-0816 BP660P-0.008-00-1112 LF3800LVO-00-150CC 803790 803266 BP100-0.005-00-1/1 SP1200-0.012-AC-1212 SP1500ST-0.012-02-1012 GP3500ULM- 0.100-02-0816 GF2000-00-600-50CC 803262 GPVOUS-0.200-00-4/4 GPVOUS-B-0.040-01-0816 803268 SPA2000-0.015-00-1012