Safety Data Sheet Revision Number: 004.0 Issue date: 02/05/2015 1. PRODUCT AND COMPANY IDENTIFICATION Product name: LOCTITE GC 10 SAC305 T4 885V IDH number: Not available. Product type: Solder Paste Restriction of Use: None identified Region: United States Company address: Contact information: Henkel Electronic Materials LLC Telephone: +1 (888) 943-6535 14000 Jamboree Road MEDICAL EMERGENCY Phone: Poison Control Center Irvine, CA 92606 1-877-671-4608 (toll free) or 1-303-592-1711 TRANSPORT EMERGENCY Phone: CHEMTREC 1-800-424-9300 (toll free) or 1-703-527-3887 Internet: www.henkel.com/electronics 2. HAZARDS IDENTIFICATION EMERGENCY OVERVIEW DANGER: CAUSES SKIN IRRITATION. MAY CAUSE AN ALLERGIC SKIN REACTION. CAUSES SERIOUS EYE IRRITATION. MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED. HAZARD CLASS HAZARD CATEGORY SKIN IRRITATION 2 EYE IRRITATION 2A RESPIRATORY SENSITIZATION 1 SKIN SENSITIZATION 1 PICTOGRAM(S) Precautionary Statements Prevention: Avoid breathing dust or fumes. Wash thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Wear eye and face protection. Wear protective gloves. In case of inadequate ventilation wear respiratory protection. Response: IF ON SKIN: Wash with plenty of soap and water. IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to remove. Continue rinsing. If skin irritation or rash occurs: Get medical attention. If eye irritation persists: Get medical attention. If experiencing respiratory symptoms: Call a poison center or physician. Take off contaminated clothing. Storage: Not prescribed Disposal: Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations. Classification complies with OSHA Hazard Communication Standard (29 CFR 1910.1200) and is consistent with the provisions of the United Nations Globally Harmonized System of Classification and Labeling of Chemicals (GHS). IDH number: Not available. Product name: LOCTITE GC 10 SAC305 T4 885V Page 1 of 6 See Section 11 for additional toxicological information. 3. COMPOSITION / INFORMATION ON INGREDIENTS Hazardous Component(s) CAS Number Percentage* Tin 7440-31-5 60 - 100 Silver 7440-22-4 1 - 5 Rosin 8050-09-7 1 - 5 Polyethylene glycol dibutyl ether 31885-97-9 1 - 5 Triethylene glycol monobutyl ether 143-22-6 1 - 5 Copper 7440-50-8 0.1 - 1 Dodecane-1-thiol 112-55-0 0.1 - 1 * Exact percentage is a trade secret. Concentration range is provided to assist users in providing appropriate protections. 4. FIRST AID MEASURES Inhalation: Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. If symptoms develop and persist, get medical attention. Skin contact: Remove contaminated clothing and footwear. Immediately rinse with copious amounts of running water (for 10 minutes). Remove contaminated clothes. Put on a bandage with sterile gauze, seek medical attention in hospital. If symptoms develop and persist, get medical attention. Wash clothing before reuse. Eye contact: Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention. Ingestion: DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If symptoms develop and persist, get medical attention. Symptoms: See Section 11. 5. FIRE FIGHTING MEASURES Extinguishing media: Water spray (fog), foam, dry chemical or carbon dioxide. Special firefighting procedures: Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. Unusual fire or explosion hazards: In case of fire, keep containers cool with water spray. Hazardous combustion products: High temperatures may produce heavy metal dust, fumes or vapors. The flux will give rise to irritating fumes. 6. ACCIDENTAL RELEASE MEASURES Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel. Environmental precautions: Do not allow product to enter sewer or waterways. Clean-up methods: Ensure adequate ventilation. Wear suitable protective clothing, gloves and eye/face protection. Scrape up as much material as possible. Keep in suitable and closed containers for disposal. IDH number: Not available. Product name: LOCTITE GC 10 SAC305 T4 885V Page 2 of 6