Hi-Flow 300P Electrically Insulating,Thermally Conductive Phase Change Material Features and Benefits TYPICAL PROPERTIES OF HI-FLOW 300P PROPERTY IMPERIAL VALUE METRIC VALUE TEST METHOD Thermal impedance: 2 Color Green Green Visual 0.13C-in /W ( 25 psi) Reinforcement Carrier Polyimide Polyimide Field-proven polyimide film Thickness (inch) / (mm) 0.004 - 0.005 0.102 - 0.127 ASTM D374 - excellent dielectric performance Film Thickness (inch) / (mm) 0.001 - 0.002 0.025 - 0.050 ASTM D374 - excellent cut-through resistance Elongation (%45 to Warp and Fill) 40 40 ASTM D882A Outstanding thermal performance in an Tensile Strength (psi) / (MPa) 7000 48 ASTM D882A insulated pad Continuous Use Temp (F) / (C) 302 150 Phase Change Temp (F) / (C) 131 55 ASTM D3418 ELECTRICAL Dielectric Breakdown Voltage (Vac) 5000 5000 ASTM D149 Dielectric Constant (1000 Hz) 4.5 4.5 ASTM D150 12 12 Volume Resistivity (Ohm-meter) 10 10 ASTM D257 Flame Rating V-O V-O U.L. 94 THERMAL Thermal Conductivity (W/m-K) (1) 1.6 1.6 ASTM D5470 THERMAL PERFORMANCE vs PRESSURE Pressure (psi) 10 25 50 100 200 TO-220 Thermal Performance (C/W) 0.0010 0.95 0.94 0.92 0.91 0.90 Hi-Flow 300P consists of a thermally TO-220 Thermal Performance (C/W) 0.0015 1.19 1.17 1.16 1.14 1.12 conductive 55C phase change compound TO-220 Thermal Performance (C/W) 0.0020 1.38 1.37 1.35 1.33 1.32 2 coated on a thermally conductive polyimide Thermal Impedance (C-in /W) 0.0010 (2) 0.13 0.13 0.12 0.12 0.12 2 film.The polyimide reinforcement makes the Thermal Impedance (C-in /W) 0.0015 (2) 0.17 0.16 0.16 0.16 0.15 2 material easy to handle and the 55C phase Thermal Impedance (C-in /W) 0.0020 (2) 0.19 0.19 0.19 0.18 0.18 change temperature minimizes shipping and 1) This is the measured thermal conductivity of the Hi-Flow coating. It represents one conducting layer in a three-layer laminate.The Hi-Flow coatings are phase change compounds.These layers will respond to heat and pressure induced stresses.The overall conductivity handling problems. of the material in post-phase change, thin film products is highly dependent upon the heat and pressure applied.This characteristic is not accounted for in ASTM D5470. Please contact Bergquist Product Management if additional specifications are required. Hi-Flow 300P achieves superior values in 2) The ASTM D5470 test fixture was used and the test sample was conditioned at 70C prior to test.The recorded value includes interfacial thermal resistance.These values are provided for reference only. Actual application performance is directly related to the voltage breakdown and thermal perfor- surface roughness, flatness and pressure applied. mance when compared to its competition. The product is supplied on an easy release Typical Applications Include: liner for exceptional handling in high volume Spring / clip mounted manual assemblies. Hi-Flow 300P is designed Discrete power semiconductors and modules for use as a thermal interface material between electronic power devices requiring Configurations Available: electrical isolation to the heat sink. Roll form, die-cut parts and sheet form, with or without pressure sensitive adhesive Bergquist suggests the use of spring clips to assure constant pressure with the interface Building a Part Number Standard Options HF300P0.001 00 00 ACME10256 Rev a and power source. Please refer to thermal NA = Selected standard option. If not selecting a standard performance data to determine nominal option, insert company name, drawing number, and revision level. spring pressure for your application. = Standard configuration dash number, 1112 = 11 x 12 sheets, 11/250 = 11 x 250 rolls, or 00 = custom configuration AC = Adhesive, one side 00 = No adhesive Standard polyimide thicknesses available: 0.001 , 0.0015 , 0.002 HF300P = Hi-Flow 300P Phase Change Material Note: To build a part number, visit our website at www.bergquistcompany.com. We produce thousands of specials. Tooling charges vary depending on tolerances and complexity of the part. Hi- Flow : U.S. Patent 6,197,859 and others All statements, technical information and recommendations herein are based on tests we believe to be reliable, and THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED www.bergquistcompany.com WARRANTIES OF MARKETABILITY AND FITNESS FOR PURPOSE. Sellers and manufacturers only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product The Bergquist Company - The Bergquist Company - The Bergquist Company - Asia for its intended use, and the user assumes all risks and liability whatsoever in connection therewith. NEITHER SELLER NOR North American Headquarters European Headquarters Room 15, 8/F Wah Wai Industrial Centre MANUFACTURER SHALL BE LIABLE EITHER IN TORT OR IN CONTRACT FOR ANY LOSS OR DAMAGE, DIRECT, 18930 West 78th Street Bramenberg 9a, 3755 BT Eemnes No. 38-40, Au Pui Wan Street INCIDENTAL, OR CONSEQUENTIAL, INCLUDING LOSS OF PROFITS OR REVENUE ARISING OUT OF THE USE OR Chanhassen, MN 55317 Netherlands Fotan, Shatin, N.T. Hong Kong THE INABILITY TO USE A PRODUCT. No statement, purchase order or recommendations by seller or purchaser not Phone: 800-347-4572 Phone: 31-35-5380684 Ph: 852.2690.9296 contained herein shall have any force or effect unless in an agreement signed by the officers of the seller and manufacturer. Fax: 952-835-0430 Fax: 31-35-5380295 Fax: 852.2690.2344 PDS HF 300P 12.08 Section A Section B Section C Section D Section EX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for bergquist company manufacturer: Other Similar products are found below : SIL-PAD 2000 150MMX150MM SHEET GP2000S40-0.040-02-4/4 GPEMI1.0-0.060-01-0816 SPA2000-0.020-00-1012 TGP6000ULM- 0.125-12-0816 803265 GPEMI1.0-0.040-01-0816 GP3500ULM-G-0.100-12-0816 TGP12000ULM-0.080-00-0808 GP1500-0.160-02-0816 SIL-PAD K6 300MMX300MM SHEET GP1500-0.200-02-0816 SP980-0.009-00-1212 GPEMI1.0-0.100-01-0816 GPA3000-0.125-01-0816 TGP12000ULM-0.100-00-0808 TGP12000ULM-0.060-00-0808 TGP3000ULM-0.120-02-0816 803263 GP1000SF-0.100-02-0816 GPHC1000-0.010-02-0816 GP1500S30-0.100-02-0816 LF2000-00-00-30CC TGP3000ULM-0.100-02-0816 TGP12000ULM-0.125-00-0808 803269 2015-54 GPVOUS-0.080-00-4/4 SP1200-0.016-AC-1212 SPA1500-0.010-00-4/4 GP1500S30-0.250-02-0816 SPA2000-0.015-AC- 1012 GP3500ULM-G-0.080-12-0816 GPVO-0.160-01-0816 GP1500S30-0.125-02-0816 BP660P-0.008-00-1112 LF3800LVO-00-150CC 803790 803266 BP100-0.005-00-1/1 SP1200-0.012-AC-1212 SP1500ST-0.012-02-1012 GP3500ULM-0.100-02-0816 GF2000-00-600-50CC 803262 GPVOUS-0.160-AC-0816 GPVOUS-B-0.040-01-0816 803268 SPA2000-0.015-00-1012 PP1000-0.009-00-1212