FILM BASED Sil-Pad K-4 , Sil-Pad K-6 and Sil-Pad K-10 SIL-PAD K-4 Sil-Pad K-4 uses a specially developed lm which has high thermal conductivity, high dielectric strength and is very durable. Sil-Pad K-4 combines the thermal transfer properties of well known Sil-Pad rubber with the physical properties of a lm. The result is a durable insulator that withstands high voltages, requires no thermal grease to transfer heat, is available in customized shapes and sizes and saves time and costs while increasing productivity. SIL-PAD K-6 Sil-Pad K-6 is a medium performance lm based thermally conductive insulator. The lm is coated with a silicone elastomer to deliver high performance and provides a SIL-PAD K-10 continuous physically tough dielectric barrier against Bergquist Sil-Pad K-10 is the high performance insulator. cut-through and resultant assembly failures. It combines special lm with a lled silicone rubber. The result Die-Cut parts, Rolls and Sheets is a product with good cut-through properties and excellent thermal performance. Sil-Pad K-4, K-6 and K-10 are available in die-cut parts, K-10 is designed to replace ceramic insulators such as sheets (6 x 6 min., 6 x 12 , 8 x 8 , 10 x 10 and 12 x 12 ) Beryllium Oxide, boron Nitride and Alumina. These insulators and roll form. are expensive and they break easily. K-10 eliminates breakage and costs much less than ceramics. Physical Properties Sil-Pad K-4 Sil-Pad K-6 Sil-Pad K-10 Test Method Color Gray Bluegreen Beige Visual Thickness Inches .006 .001 .006 .001 .006 .001 (mm) (.15 .025) (.15 .025) (.15 .025) ASTM D 374 Breaking Strength Lbs/inch (kN/m) 30 (5) 30 (5) 30 (5) ASTM D 1458 Elongation, % 45 to warp and ll 40 40 40 ASTM D 412 Hardness, Shore A 90 90 90 ASTM D 2240 Tensile Strength, kPsi (MPa) 5 (35) 5 (35) 5 (35) ASTM D 412 Thermal Vacuum Weight Loss NASA % (TML) as manufactured .26 .36 SP-R-0022A Continuous Use Temp., C -60 to +180 -60 to +180 -60 to +180 -- Construction Silicone/Film Silicone/Film Silicone/Film Volatile Condensable Material NASA % (CVCM) as manufactured .07 .09 SP-R-0022A Thermal Properties Sil-Pad K-4 Sil-Pad K-6 Sil-Pad K-10 Test Method 2 Thermal Resistance, C-in /W 0.40 0.30 0.2 ASTM D 5470 Thermal Conductivity, W/m-K 0.9 1.1 1.3 ASTM D 5470 Electrical Properties Sil-Pad K-4 Sil-Pad K-6 Sil-Pad K-10 Test Method Breakdown Voltage, Volts a-c Min. 6000 6000 6000 ASTM D 149 Dielectric Constant, 1000 Cps (Hz) 5.0 4.0 3.7 ASTM D 150 12 12 12 Volume Resistivity, Ohm Metre 1.0x10 1.0x10 1.0x10 ASTM D 257 15X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for bergquist company manufacturer: Other Similar products are found below : SIL-PAD 2000 150MMX150MM SHEET GPEMI1.0-0.060-01-0816 SPA2000-0.020-00-1012 SPK6-0.006-AC-11.512 TGP6000ULM- 0.125-12-0816 803265 GPEMI1.0-0.040-01-0816 GP3500ULM-G-0.100-12-0816 TGP12000ULM-0.080-00-0808 GP1500-0.160-02-0816 TGP3000ULM-0.080-02-0816 SIL-PAD K6 300MMX300MM SHEET GP1500-0.200-02-0816 SP980-0.009-00-1212 GPEMI1.0- 0.100-01-0816 GPA3000-0.125-01-0816 TGP12000ULM-0.100-00-0808 TGP12000ULM-0.060-00-0808 TGP3000ULM-0.120-02-0816 803263 GP1000SF-0.100-02-0816 GPHC1000-0.010-02-0816 GP1500S30-0.100-02-0816 LF2000-00-00-30CC TGP3000ULM- 0.100-02-0816 TGP12000ULM-0.125-00-0808 803269 2015-54 GPVOUS-0.080-00-4/4 SP1200-0.016-AC-1212 SPA1500-0.010-00-4/4 GP1500S30-0.250-02-0816 SPA2000-0.015-AC-1012 GP3500ULM-G-0.080-12-0816 GPVO-0.160-01-0816 GP1500S30-0.125-02-0816 BP660P-0.008-00-1112 LF3800LVO-00-150CC 803790 803266 BP100-0.005-00-1/1 SP1200-0.012-AC-1212 SP1500ST-0.012-02-1012 HF625-0.005-AC-1212 GF2000-00-600-50CC GPVOUS-0.160-AC-0816 GPVOUS-B-0.040-01-0816 803262 803268 SPA2000- 0.015-00-1012