Safety Data Sheet Revision Number: 004.0 Issue date: 04/24/2017 1. PRODUCT AND COMPANY IDENTIFICATION Product name: LOCTITE NC-AA WICK known as NC- IDH number: 1756009 AA NO CLEAN 1.5M WICK 10-REL Product type: Desoldering wick Restriction of Use: None identified Region: United States Company address: Contact information: Henkel AG & Co. KGaA Telephone: +49 (211) 797 0 Henkelstr. 67 Dsseldorf 40589 2. HAZARDS IDENTIFICATION EMERGENCY OVERVIEW WARNING: CAUSES SKIN AND EYE IRRITATION. MAY CAUSE AN ALLERGIC SKIN REACTION. MAY CAUSE DROWSINESS OR DIZZINESS. HAZARD CLASS HAZARD CATEGORY SKIN IRRITATION 2 EYE IRRITATION 2B SKIN SENSITIZATION 1 SPECIFIC TARGET ORGAN TOXICITY - SINGLE EXPOSURE 3 PICTOGRAM(S) Precautionary Statements Prevention: Avoid breathing dust or fumes. Wash affected area thoroughly after handling. Use only outdoors or in a well-ventilated area. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves. Response: IF ON SKIN: Wash with plenty of water. IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or physician if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation or rash occurs: Get medical attention. If eye irritation persists: Get medical attention. Take off contaminated clothing. Storage: Store in a well-ventilated place. Keep container tightly closed. Store locked up. Disposal: Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations. Classification complies with OSHA Hazard Communication Standard (29 CFR 1910.1200) and is consistent with the provisions of the United Nations Globally Harmonized System of Classification and Labeling of Chemicals (GHS). See Section 11 for additional toxicological information. 3. COMPOSITION / INFORMATION ON INGREDIENTS IDH number: 1756009 Product name: LOCTITE NC-AA WICK known as NC-AA NO CLEAN 1.5M WICK 10-REL Page 1 of 6 Hazardous Component(s) CAS Number Percentage* Copper 7440-50-8 90 - 100 1,3-Propanediol, 2,2- 4196-86-5 1 - 5 bis (benzoyloxy)methyl -, dibenzoate Rosin, maleated, polymer with 68333-69-7 1 - 5 Pentaerythritol * Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections. 4. FIRST AID MEASURES Inhalation: Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. If symptoms develop and persist, get medical attention. Skin contact: Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention. Wash clothing before reuse. Eye contact: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention. Ingestion: Induce vomiting as directed by medical personnel if person is conscious. Never give anything by mouth to an unconscious person. Get medical attention. Wire strands could cause internal injury Symptoms: See Section 11. 5. FIRE FIGHTING MEASURES Extinguishing media: Water spray (fog), foam, dry chemical or carbon dioxide. Special firefighting procedures: Wear a self-contained breathing apparatus with a full face piece operated in pressure-demand or other positive pressure mode. Do not use water on fires where molten metal is present. Unusual fire or explosion hazards: None Hazardous combustion products: Oxides of carbon. Oxides of Metals in Section 3. High temperatures may produce heavy metal dust, fumes or vapors. The flux medium will give rise to irritating fumes. 6. ACCIDENTAL RELEASE MEASURES Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel. Environmental precautions: Do not allow product to enter sewer or waterways. Clean-up methods: Scrape up as much material as possible. 7. HANDLING AND STORAGE Handling: Use only in well-ventilated areas. Avoid contact with eyes, skin and clothing. Do not wear contact lenses. Wash thoroughly after handling. Storage: Store in a cool, dry, well-ventilated area. Store in original container until ready to use. For information on product shelf life, please review labels on container or check the Technical Data Sheet. IDH number: 1756009 Product name: LOCTITE NC-AA WICK known as NC-AA NO CLEAN 1.5M WICK 10-REL Page 2 of 6