6252-AAAA-AAZ0 Herga

6252 Heavy Duty Footswitches 6 Average life expectancy 1 x 10 operations Rugged high performing heavy duty footswitch Customer colours and logos available on request Forced break positive opening contacts Distinctive styling Reference dimensions Cover option Guard option Ordering and options A - Z 0 Stock models : 6252-AAAA-AAZ0 6252- 6252-BAAA-AAZ0 Model Cover and guard colours A Cover Yellow B Guard Yellow C Cover White D Guard White E Cover Blue F Guard Blue Other colours available subject to MOQ contact sales for details Base colour A Black B White Thread/Hole information A M20 Rear hole B PG 13.5 Rear hole C PG 13.5 Rear hole with double M20 side holes D PG 13.5 Rear hole with double PG 13.5 side holes Tread colour A Black Action/Electrical rating AA DPST Single Operation, Slow Break & Make AC-15 6A 250V DC-13 6A 24V BB DPST Single Operation, Snap Break & Make AC-15 6A 250V DC-13 6A 24V DB 4PST Double Operation, Snap Break & Make AC-15 6A 250V DC-13 6A 24V EA 4PST Double Operation, Slow Break & Make AC-15 6A 230V DC-13 6A 24V MB DPST + DPST staggered Double Action (High Force), Snap Break & Make AC-15 6A 230V DC-13 6A 24V Emergency stop Z No emergency stop fitted Double pedal versions with/without guard available, to find out more, talk to our sales department. Herga Technology Ltd - Northern Way - Bury St. Edmunds - Suffolk - IP32 6NN - UK sales herga.com www.herga.com +44 (0)1284 701422 Subject to change without notice 6252 Heavy Duty Footswitch 17/076252 Heavy Duty Footswitches General specifications Standards/approvals EN60204-1 with switching to meet EN60947-5-1, VDE 0660 Operating temperature range -25C to +60C pt 200, IEC 947-5-1 Body material Die cast aluminium Degree of protection EN 60529 IP67 (IP68 upon request) Weight Cover/unguarded 1Kg or 1.5Kg guarded Connection method Screw terminals, stripped cable cores or connector of your 6 Average mechanical life 1 x 10 operations choice Additional information the electrical housing has an environmental rating of IP67. Electrical rating See table below To achieve this, a minimum torque of 1.7N should be Contact configuration See table below applied to the two enclosure screws Limit switch specifications Options A & B in electrical rating section Options D in electrical rating section 500V AC, over 380V AC same potential only Rated operating voltage AC 40 - 60 Hz DC AC 50 - 60 Hz Le/AC-12 Ue Le/AC-15 Ue Le/DC-12 Le/DC-13 Ue (V) Le/AC-15 (A) (A) (V) (A) (V) A) (A) 10 24 10 24 10 10 230 3 10 125 10 48 6 4 Rated operational current 10 230 6 110 4 1 10 400 4 220 1 0.4 10 500 3 440 0.5 0.2 Limit switches also available with gold contacts Note: When the footswitch is supplied with a pre-wired cordset, the cordset rating takes precedence over the footswitch rating. The rating will be marked on the cordset Electrical Life Expectancy at 6 0.5 X 10 switching cycles when interrupting 6A AC-15 at 250V Category AC-15 Normally open + normally closed positive opening operation to EN 60947-5-1 Contact configuration >3mm, suitable for mains isolation Contact Gap Screw terminals and self-lifting clamp for connection of flexible leads Screw terminals for connection of flexible lead wire Terminals 2 2 2 2 min. 2 x 1.5 mm - max. 2 x 2.5 mm min. 1 x 0.5 mm - max. 2 x 2.5 mm Action Type from Order Code A B D E MB 1 Pole 2 Pole 1 Pole 2 Pole Slow Make Slow Make Double snap action Limit switch action Snap Action Snap Action Slow Break Slow Break In all applications except where protective extra low voltage (PELV) circuits are being switched, Contact configuration an earth conductor must be installed. The earth conductor should be rated in accordance with the prevailing standards. 6252-XXXA-AAZ0 6252-XXXA-BBZ0 6252-XXXA-DBZ0 6252-XXXA-EAZ0 6252-XXXA-MBZ0 Herga Technology Ltd - Northern Way - Bury St. Edmunds - Suffolk - IP32 6NN - UK sales herga.com www.herga.com +44 (0)1284 701422 Subject to change without notice 6252 Heavy Duty Footswitch 17/07