Stay Connected with Liquid Tight Cordgrips Heyco Liquid Tight Cordgrips INSTALLATION INSTRUCTIONS for THREADED mounting holes: For torque information, see page 3-58 or visit the Cordgrips section on www.heyco.com. 1. Be sure that hole is free of burrs and panel surface around hole is smooth and free of debris. 2. Using the hex portion on the body (not the sealing nut), screw the fitting tightly into the threaded mounting hole. 3. Insert the cable through the fitting to the desired position. 4. Hand-tighten the SEALING nut as far as possible. Hold the BODY hex stationary with a wrench. Using a second wrench, tighten the SEALING nut until the wire is securely held in place. 5. Using a wrench on the BODY hex, check to make sure the fitting is still screwed tightly into the panel. 6. To disassemble for cable replacement, use a wrench to hold the BODY hex stationary and loosen the SEALING nut with a second wrench. Grip the disconnected cable and pull while turning the cable in the counter- clockwise direction. Heyco-Tite Original Series-35 LOCKNUT SEALING NUT BODY HEX LOCKNUT SEALING NUT BODY HEX INTEGRAL (optional with NPT thread) (optional with NPT thread) SEALING RING Heyco PG Thread Taps For Steel Conduit Threads per DIN 40430* THREAD TYPE TAP DRILL DESCRIPTION PART NO. PART DIMENSIONS Use a starting tap for through-hole AND SIZE DIAMETER Starting Finishing Major Length applications. mm. Diameter Overall Thread For blind holes, thread first with a starting tap finish bottoming the mm. mm. mm. threads with a finishing tap. PG 7 11,5 PG T 7 0150 0151 12,5 63,0 20,0 PG 9 14,0 PG T 9 0153 0154 15,2 70,0 20,0 Flank angle 80. PG 11 17,3 PG T 11 0156 0157 18,6 80,0 22,0 Made of high-speed steel with PG 13.5 19,0 PG T 13.5 0159 0160 20,4 80,0 22,0 ground threads for greater accuracy PG 16 21,3 PG T 16 0162 0163 22,5 80,0 22,0 to assure optimum performance. PG 21 27,0 PG T 21 0165 0166 28,3 90,0 22,0 Suitable for cutting alloy steel, PG 29 35,5 PG T 29 0168 0169 37,0 110,0 25,0 bronze, and stainless. *See page 3-49 for DIN 40430 Specifications. 1-800-526-4182 732-286-1800 (NJ) FAX: 732-244-8843 www.heyco.com 3-56X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Punches & Dies category: Click to view products by Heyco manufacturer: Other Similar products are found below : 58510-1 63454-1601 63457-0056 63457-3401 730-5/8 730BB-1-3/8 734410 PV-670508-001 1328 1338 13782656 13782673 AR-19 AR- 24 1583609-1 1720 1762951-1 2063500-2 19031-0168 AR-20 AR-23 CD5-8 313336-3 11-19-3122 539663-1 63446-2241 TL-11 TL-18 0634451912 1762674-1 63454-0123 68240-1 68247-1 734252 313183-1 PA2029 119174-001 23846-1 11-40-5342 68010-2 690370015 730BB-1-1/8 730BB-1-1/16 19032-0048 63465-0023 11-40-4438 63457-0041 19032-0202 11-11-0054 11-11-0052