SLCU-6-O-1 HOLLAND ELECTRONICS

CONNECt Ors & AdAPtErs slcU series c ompression c onnectors MOdELs sLCu-* : sLCu-*rCA : sLCu-*BNC sLCu-* sEriEs sLCu-*rCA sEriEs sLCu-*BNC sEriEs f tYPE rCA tYPE BNC tYPE fEA turEs all-Metal construction superloK compression connectors The superlok series compression connector utilizes dual o-ring Moisture sealing (f type) two independent compression points to seal and hold the dual compression points coaxial cable to the connector. Our patented viewing window allows users to determine when complete cable patented cable Viewing window insertion has been achieved prior to compression. patented internal-grip ring 1-piece Fixed pin design for bnc & rca color-coded application bands (srr) foil Braid Dual o-rings Jacket 2nd Compression point grip ring 1st Compression point sidE ViEwiNG wiNdOw Patented cable-insertion viewing window helps to ensure cable is fully seated inside of connector. Applicable Patents - reference: B / J / t - see page 111 for patent details 2935 Golf Course Drive Ventura, CA 93003 (800) 628-4511 FAX (805) 339-0230 www.hollandelectronics.com 19CONNECt Ors & AdAPtErs slcU series ompression c onnectorsc slcu identificAtion 1 1. Marking grooves used to indicate cable braid configuration. 3 Colored-front O-Rings for visual verification of cable type. 2. (Also provides improved moisture sealing) 3. Rear groove for SRR marking bands to indicate application. 2 cable tYpe MarKing (1) id (2) cable tYpe MarKing (1) id (2) Standard 6 No Grooves Blue O-Ring Standard 59 No Grooves Red O-Ring Tri-Shield 6 1 Groove Black O-Ring Tri-Shield 59 1 Groove Yellow O-Ring Quad-Shield 6 2 Grooves Green O-Ring Quad-Shield 59, HEC2 2 Grooves Yellow O-Ring Triple O-Ring 6 3 Grooves Blue O-Ring Standard 11 No Grooves Black O-Ring Triple O-Ring Quad-Shield 6 3 Grooves Green O-Ring Quad-Shield 11 2 Grooves Green O-Ring Aspecific tions electrical Frequency DC - 3 GHz Insertion Loss (Max) .1 dB Return Loss (Min) 30 dB Mechanical Material Brass Cable Strip Length 1/4 x 1/4 NOtE: All specifications typical unless otherwise noted hollAnds mAle f superloK connectors complY with scte 123 2006 And hAve been tested to the following specificA:tions SCTE 60 2004 Moisture Migration Pass SCTE 48-1 2007 Shielding >90 dB 1002 MHz SCTE IPS-TP-406 Salt Spray Pass SCTE IPS-TP-400 Tightening Torque Pass SCTE 73 2007 Insertion Force < 20 lbs. SCTE 04 2007 Return Loss > 30 dB 1002 MHz -* srr Aeplr Ace ble bAnds (note: * = Color) Easily identify application source with srr Marking Bands. BL = BLUE W = WHITE B = BLACK Y = YELLOW G = GREEN P = PURPLE R = RED eXAMple: Yellow=Video, Red=Audio, etc. * see support section of our site (www.hollAndelectronics.com/support) for connector instAllAtion instructions. 20 2935 Golf Course Drive Ventura, CA 93003 (800) 628-4511 FAX (805) 339-0230 www.hollandelectronics.com