Model A-105 Flush Diaphragm Pressure Transducer DESCRIPTION Model A-105 gage pressure transducers are manufactured with environments. Model A-105 has welded electrical connectors a unitized stainless steel diaphragm. The advantage of this type as an integral part of the transducer body and recommended of design is that a thin diaphragm and heavy sidewalls are made for applications involving rough handling or where an all-welded from one piece of stainless steel. This unitized diaphragm is rug- stainless steel transducer is required. ged, but at the same time can be made thin enough to measure All units have four (4) active bonded strain gages arranged in a low pressures. Available pressure ranges span from 100 psig Wheatstone-bridge configuration. to 15,000 psig. These models can be used in corrosive fluid FEATURES 100 psig to 15000 psig range Flush mount design No dead volume Miniature footprint Stainless steel CE approvedModel A-105 PERFORMANCE SPECIFICATIONS RANGE CODES Characteristic Measure Range Code Available ranges Pressure ranges 100, 150, 200, 300, 500, 750, 1000, BR 100 psi 1500, 2000, 3000, 5000, 7500, 10000, 150 psi CJ 15000 psig CL 200 psi Accuracy6 0.5 % full scale 300 psi CP Non-linearity and hysteresis 0.5 % full scale 500 psi CR Non-repeatability 0.1 % full scale 750 psi CT Output 2 mV/V nominal 1000 psi CV Resolution Infinite 1500 psi DJ 2000 psi DL ENVIRONMENTAL SPECIFICATIONS 3000 psi DN 5000 psi Characteristic Measure DR Temperature, operating -54 C to 149 C -65 F to 300 F DT 7500 psi Temperature, compensated 16 C to 71 C 60 F to 160 F 10000 psi DV Temperature effect, zero 0.01 % full scale/F EJ 15000 psi Temperature effect, span 0.02 % reading/F OPTION CODES ELECTRICAL SPECIFICATIONS Many range/option combinations are available in Range Code our quick-ship and fast-track manufacture pro- Characteristic Measure grams. Please see