Model 11 Subminiature Load Cell DESCRIPTION The model achieves a non-linearity and hysteresis of 0.5 % full Model 11 (tension/compression) subminiature load cell is scale respectively and a frequency response of up to 58 kHz. A designed to measure load ranges from 150 g to 1000 lb. With balance module is included in the load cells lead wire cable for subminiature dimensions, including diameters from .50 in to 0.75 zero balance, and should not be removed. in and height of 0.38 in, these units are easily incorporated into systems having limited space. FEATURES 150 g to 1000 lb mV/V output Subminiature design Single diaphragm constructionModel 11 PERFORMANCE SPECIFICATIONS RANGE CODES Characteristic Measure Range codes Range 7 Load ranges 150 g to 1000 lb 150 g AL Linearity 0.5 % full scale 250 g AN Hysteresis 0.5 % full scale 500 g AP Non-repeatability 0.1 % full scale 1000 g AR Tolerance on output 10 mV/V (nominal) 5 lb AT 150 g to 500 g 10 lb AV Tolerance on output 2 mV/V (nominal) 1000 g to 1000 lb 25 lb BL 3 Operation Tension/compression 50 lb BN Resolution Infinite 100 lb BR Maximum permissible 4 in-lb 250 lb CN torque 150 g to 100 lb 500 lb Maximum permissible CR 20 in-lb torque 250 lb to 1000 lb 1000 lb CV ENVIRONMENTAL SPECIFICATIONS WIRING CODES Characteristic Measure Cable Unamplified Temperature, operating -54 C to 121 C -65 F to 250 F Red (+) excitation Temperature, compensated 15 C to 71 C 60 F to 160 F Black (-) excitation Temperature effect, zero 0.01 % full scale/F Green (-) output Temperature effect, span 0.02 % reading/F White (+) output ELECTRICAL SPECIFICATIONS MOUNTING DIMENSIONS Characteristic Measure Ranges D T H A B Strain gage type Semiconductor 150, 250, 500, 12,7 4-40 7,37 mm 4,83 mm 4,57 mm 150 g to 500 g 1000 g 5, 10, mm UNC 0.29 in 0.19 in 0.18 in 25, 50, 100 lb 0.50 in Strain gage type Bonded foil 1000 g to 1000 lb 250, 500, 19,05 1/4-28 9,65 mm 7,87 mm 7,87 mm 1000 lb mm UNF 0.38 in 0.31 in 0.31 in Excitation (calibration) 5 Vdc 0.75 Insulation resistance 5000 mOhm 50 Vdc Bridge resistance (toler- 500 ohm (nominal) ance) 150 g to 500 g Bridge resistance (toler- 350 ohm (nominal) ance) 1000 g to 1000 lb Zero balance (tolerance) 3 % of full scale (nominal) Shunt calibration data Included 4 Electrical termination (std) 1,83 m 5 ft cable with balance board MECHANICAL SPECIFICATIONS Characteristic Measure 1 Maximum allowable load See table Weight See table Material Stainless steel Deflection full scale See table Natural frequency See table 2 Honeywell Sensing and Control