Model TJE Precision Gage/Absolute Pressure Transducer DESCRIPTION The gage Model TJE is a strain gage based transducer and Model TJE pressure transducers are all-welded stainless steel features a unique true gage design which utilizes a second sensors built for rugged industrial applications that require high welded stainless steel diaphragm that hermetically seals the accuracy and measurement stability. The Model TJE is available strain gage circuitry from atmospheric contamination. This with a variety of options for extended temperature operation, design references the primary pressure sensing diaphragm to electrical terminations and high-level outputs including 5 Vdc or the atmosphere, and provides a stable zero regardless of the 10 Vdc and 4 mA to 20 mA. Most high-level output models have transducer environment. internal shunt calibration circuits as a standard feature to allow easy set-up of the sensor to the data system. An optional internal The absolute Model TJE has an all-welded vacuum reference signature calibration chip provides calibration information for chamber assuring long-term stability. automatic set up with the Model SC four-or-twelve channel digital indicator. FEATURES 0.1 % accuracy 0.0025 % F.S./F temperature effect 1 psig/a to 60000 psig/a range mV/V, 4 mA to 20 mA, 0 Vdc to 5 Vdc, or 0 Vdc to 10 Vdc output All-welded, stainless steel construction 18 Intrinsically safe available (2N option only) 19 CEModel TJE PERFORMANCE SPECIFICATIONS MOUNTING DIAGRAM AND CHARACTERISTICS Characteristic Measure 1 Accuracy 0.10 % full scale Linearity 0.10 % full scale Hysteresis 0.05 % full scale Media All gases/liquids compatible with wetted parts Resolution Infinite Calibration 5-point calibration: 0 %, 50 %, and 100 % of full scale ENVIRONMENTAL SPECIFICATIONS Characteristic Measure Temperature compensated 15 C to 71 C 60 F to 160 F For reference only Temperature effect, zero 0.0025 % full scale/F Temperature effect, span 0.0025 % reading/F Sealing Her metically sealed IP68/NEMA 6P TyPICAL SySTEM DIAGRAM ELECTRICAL SPECIFICATIONS Characteristic Measure Strain gage type Bonded foil Insulation resistance 5000 mOhm 50 Vdc Bridge resistance 350 ohm Shunt calibration data Included Electrical ter mination (std) PTIH-10-6P or equiv. (her metic stainless) Mating connector (not incl) PT06A-10-6S or equiv. (AA111) MECHANICAL SPECIFICATIONS Characteristic Measure Wetted parts material number here < 2000 psig/a 17-4 PH stainless steel > 2000 psig/a 15-5 PH stainless steel Weight 10 oz Case material 304 stainless steel Marking Per manent metal name plate MIL- STD130F 4.3 Individual sequential serial number per sensor Countr y of SPECIAL REq UIREMENTS (CONSULT FACTORy) origin and date of manufacture Have a special requirement New case pressure, different cable lengths, electrical connectors, or materials Consult our factory by calling +1 614-850-5000 (800-848-6564). Customization is key to our test and measurement business. Special outputs, wiring codes, and calibrations are all standard to us. 2 Honeywell Sensing and Control