Pressure Sensors Low-cost, Stainless Steel, Isolated Sensors 13 mm Series FEATURES Rugged, isolated stainless steel package Reliable semiconductor technology Calibrated and temperature compensated Voltage or current supply options Honeywells 13 mm Series stainless steel pressure sensors are designed Absolute and sealed gage for high pressure applications that involve measurement of hostile media in pressures harsh environments. This series uses Honeywells proven piezoresistive Low-cost cell package semiconductor sensor chip in an oil-isolated housing with or without an Absolute pressure integral ceramic for temperature compensation and calibration. This design 0 psi to 500 psi, 1000 psi, has proven to be highly reliable, stable and accurate. 2000 psi, 3000 psi, and These sensors feature a weld-ring collar and special back support ring for 5000 psi high cycle life capability as they are designed for further package integration in OEM (Original Equipment Manufacturer) applications. Products are available with pressure ranges from 500 psi through 5000 psi and can be TYPICAL APPLICATIONS used with voltage or current supplies. Industrial controls Hydraulic controls EQUIVALENT CIRCUIT Tank pressure Pressure transmitters Process control systems 13 mm compensated series 13 mm uncompensated series WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or WARNING in any other application MISUSE OF DOCUMENTATION where failure of the product The information presented in this product sheet is for reference only. Do could result in personal not use this document as a product installation guide. injury. Complete installation, operation, and maintenance information is provided Failure to comply with in the instructions supplied with each product. these instructions could Failure to comply with these instructions could result in death or result in death or serious serious injury. injury. Sensing and Control Pressure Sensors Low-cost, Stainless Steel, Isolated Sensors 13 mm Series PRESSURE SENSOR CHARACTERISTICS (all devices) Environmental specifications Compensated temperature range 0 C to 82 C 32 F to 180 F Operating temperature range -40 C to 125 C -40 F to 257 F Storage temperature range -40 C to 125 C -40 F to 257 F Vibration 10 G at 20 Hz to 2000 Hz Shock 100 G for 11 ms Life 1 million cycles min. Insulation resistance 100 m at 50 Vdc Maximum ratings Voltage version K Supply voltage V = +15 Vdc S Voltage version L Supply current I = +2.0 mA S (1) PERFORMANCE CHARACTERISTICS COMPENSATED SERIES Characteristic Minimum Typical Maximum Units Zero pressure offset -2 0 +2 mV (3) Pressure non-linearity 0.1 0.25 %FSS (3) Pressure hysteresis 0.015 0.030 %FSS Repeatability 0.010 0.030 %FSS (4) Temp. effect on span 0.5 1.0 %FSS (4) Temp. effect on offset 0.5 1.0 %FSS Thermal hysteresis (0 C to 82 C 32 F to 180 F ) 0.1 0.3 %FSS (5) Long-term stability of offset and span 0.1 0.3 %FSS (6) Response time 0.1 ms (9) Common mode voltage (voltage version K) 0.50 1.25 2.0 Vdc Input resistance (current version L) 2.0 4.5 8.0 k Input resistance (voltage version K) 8.0 25 50 k Output resistance 3.0 4.5 6.0 k PRESSURE RANGE SPECIFICATIONS COMPENSATED SERIES (2) (7) (8) Catalog Listing Pressure range Full scale span Proof pressure Burst pressure 13C 0500P (A,S) (1,4,5,6) (K,L) 0 psi to 500 psi 98 mV to 102 mV 1500 psi 2500 psi 13C 1000P (A,S) (1,4,5,6) (K,L) 0 psi to 1000 psi 98 mV to 102 mV 3000 psi 5000 psi 13C 2000P (A,S) (1,4,5,6) (K,L) 0 psi to 2000 psi 98 mV to 102 mV 6000 psi 10,000 psi 13C 3000P (A,S) (1,4,5,6) (K,L) 0 psi to 3000 psi 98 mV to 102 mV 9000 psi 10,000 psi 13C 5000P (A,S) (1,4,5,6) (K,L) 0 psi to 5000 psi 148 mV to 152 mV 10,000 psi 10,000 psi NOTES 1. Reference conditions (unless otherwise noted): T = 25 C 77 F Supply V = 10 Vdc 0.01 Vdc or I = 1.5 mA A S S 0.0015 mA. 2. Full-scale span (FSS) is the algebraic difference between the output voltage at full-scale pressure and the output at zero pressure. FSS is ratiometric to supply voltage. 3. Pressure non-linearity is based on best-fit straight line from zero to the full-scale pressure. Pressure hysteresis is the maximum output difference at any point within the operating pressure range for increasing and decreasing pressure. 4. Maximum error band of the offset voltage or span over the compensated temperature range, relative to the 25 C 77 F reading. 5. Long-term stability over a six-month period. 6. Response time for a 0 psi to FSS pressure step change, 10 % to 90 % rise time. 7. The maximum pressure that can be applied without changing the transducers performance or accuracy. 8. The maximum pressure that can be applied to a transducer without rupture of either the sensing element or transducer case. 9. Common mode voltage as measure from output to ground. 2 Honeywell Sensing and Control