14CX11 Honeywell

MICRO SWITCH Weather-Sealed, Explosion-Proof Switches CX Series DatasheetMICRO SWITCH CX Series Weather-Sealed, Explosion-Proof Switches MICRO SWITCH CX switches are built especially for outdoor use in hazardous atmospheres. These enclosures are constructed to withstand the pressure of an internal explosion. Flame paths cool the exploded gases to a point less than the lowest safe operating temperature of the surrounding gas. MICRO SWITCH 80CX Series switches have rugged bronze housings that are designed to be resistant to salt water and other corrosive environments. They comply with the NEMA 4X requirement for protection against corrosion, in addition to NEMA enclosure standards met by other CX switches. The products o-ring seals make the enclosure rain tight, but are outside of required flame paths so explosion proof requirements are maintained. Unless special ordered, all basic switches operate on clockwise and counterclockwise rotation. The actuating mechanism can be field adjusted for CW or CCW operation only. No tools are required. What makes our switches better Building block design allows for digital switching outputs Weather sealed to NEMA and IP ratings UL, CSA, ATEX, IEC Ex, INMETRO certified for hazardous (explosive) environments Designed with the end user in mind, these switches help to create user-friendly interfaces with broad application possibilities to help meet the challenges of many different environments Available with gold contacts, low-temp seals, and bronze corrosion-resistant housing COST OPTIMIZATION RELIABILITY GLOBALLY ACCEPTED sensing.honeywell.com 2