24CE/924CE Miniature Safety Electromechanical Switch FEATURES Positive opening operation of Normally Closed contacts conforming to (924CE Series Only) IEC/EN 60947-5-1-3 Compact construction Pre-wired Die-cast Zinc housing Wide selection of actuators Cable length variations Side and bottom exit cable Simple two-screw mounting IP 65/66/67 UL recognised CSA certified (924CE), CE (24CE Series compliant, BG approved (24CE) Only) BENEFITS Suitable for applications where space is at a premium Fast and easy to install The ranges 24CE and 924CE have been tested and approved to meet the require- Suitable for difficult operating ments of the Low Voltage directive and positive opening safety contacts per IEC/ environments EN 60947-5-1-3. The devices are CE marked. The red colour clearly differentiates this safety component in the application. The 924CE range also has UL and CSA Application flexibility approval. Enhanced choice for application Multiple plunger capability It is possible for the end user to enhance the safety level of these switches from Category 1 per EN 954-1 on their own to Categories 2, 3 or 4 per EN 954-1when the switches are used in conjunction with our wide range of FF-SR safety control mod- ules to form a safety system. Typical applications for these switches would use the roller plunger 24CE18 style in conjunction with cams on doors with hinges. Also available are a range of panel mounting or top mounting versions to ensure that small space or difficult mounting can be simply achieved. Several contact arrangements are available. WARNING MISUSE OF DOCUMENTATION The information presented in this product sheet (or catalogue) is for reference only. DO NOT USE this document as system installation information. Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. 24CE/924CE Series Industrial Safety Products 215 24CE/924CE24CE/924CE Actuator Types Slow Action Contacts 24CE Series 1 Normally Closed Miniature Safety blue brown Electromechanical green/yellow Switch Circuit closed * Positive opening to IEC/EN 60947-5-1-3 17,1 +/- 0,4 P.T = 2,2 max. O.P Technical Data 13,1 * Mechanical 10 million operations. O.F (max.) = 22,5 Newtons / 2300 GMF life Degree 24CE 29,9 +/- 0,4 P.T = 2,2 max. of protection Standard type: IP 66 O.P With boot seal type: IP 67 25,9 * Temperature Operating: 0 C to +70 C / O.F (max.) = 22,5 Newtons / 2300 GMF range 32 F to +160 F 29,9 +/- 0,4 Approvals* IEC 60947-5-1 P.T = 2,2 max. EN 60947-5-1 O.P ac15 B300 25,9 * dc13 R300 O.F (max.) = 22,5 Newtons / 2300 GMF Electrical According to IEC/EN 60947-5-1. Rated insulation voltage Ui = 500 V. 0 Degrees P.T = 30 Degrees Rated impulse withstand voltage max. O.P Uimp = 2,5 kV. 50 Deg. * Not suitable for isolation. SCPD, Quick blow fuse to IEC 127 O.F (max.) = 7,85 Newtons / 800 GMF suitable for rated current. 7,1 * See Standards (page 179) 24,3 max. 23,9 +/- 0,4 P.T = 2,2 max. Dimensions in mm / in O.P 18 19,9 * 40 / max. 1.58 O.F (max.) = 22,5 Newtons / 2300 GMF Pin Plunger (Boot Sealed) 16 / max. 0.63 12,4 35,7 +/- 0,4 25 / 36,1 max. P.T = 2,2 max. 0.98 O.P 2 Holes 5,1 dia Counter Bored 10,2 dia x 6 deep 31 31,7 * (both sides - option A only) Free position O.F (max.) = 22,5 Newtons / 2300 GMF Roller Plunger Parallel (Boot Sealed) 49 / 12,4 max. 1.93 8 / 35,7 +/- 0,4 0.32 36,1 max. P.T = 2,2 max. O.P 55 Side exit cable 31,7 * (Option A ) O.F (max.) = 22,5 Newtons / 2300 GMF Cable Type Roller Plunger Perpendicular (Boot Sealed) 2 3 or 5 x 0,75 mm harmonised CENELEC cable. Y Ordering: OR 24CE X XX Example: 24CE18-Y1A 216 Industrial Safety Products 24CE/924CE Series