Manual Switches AML23 Series
Electronic Control Paddle
INCANDESCENT OR NON-LIGHTED DISPLAY
FEATURES
Electrical Data page 19
1 Silver or gold contacts.
Paddle Covers page 47
1 1, 2 or 4 poles.
Lamps and LEDs page 58
1 Toggle type paddle operators
Accessories page 57
permanently installed in rectangular
Mounting Dimensions pages 59, 62
housings.
1 Covers for the switch housing may be
lighted or unlighted.
*
*
1 UL recognized, CSA certified.
1 Lamps can be furnished installed or
Covers ordered separately.
ordered separately.
1 Lamp circuit independent of switch *AML23 Series: 1 pole and
2-pole only.
circuit.
*AML23 ORDER GUIDE
AML23 E B A 2 AA 01
Housing Operator/Bezel Incandescent Terminal Circuitry Operating
Type Color Lamp Type Type Codes Action
AML23 E B A 2 Insert Code Insert Code numbers
Rectangular Black/Black No Lamp .110 .020 letters as from Operating
Non-Lighted Installed (Solder or shown in Action Chart
Quick-Connect) Circuitry Chart
AML23 F B
Rectangular 6 V Lamp* 3
1 Lamp Ckt. (A) .025 .025
C (Printed Ckt.,
AML23 G 14 V Lamp* or Push-on)
Rectangular
2 Lamp Ckts. E
(A&B) 28 V Lamp*
* Lamps will be installed per each lamp circuit specified in the Housing Type.
Example: AML23EBA2AA01
Rectangular non-lighted paddle switch
housing; black paddle and bezel; .110
.020 terminals; with one circuit ON and
one circuit OFF in each extreme operator
1 The MICRO SWITCH
position (maintained).
identification is shown
on this side of the
switch housings.
CIRCUITRY OPERATING ACTION
Silver Gold 2-Position 3-Position
Contacts Contacts
2-Position:
AA BA
01
Maint. None Maint.
02
AC BC
Mom. None Maint.
03
(Non-illuminated
Maint. None Mom.
switches only)
3-Position:
CA DA
04
Maint. Maint. Maint.
05
Mom. Maint. Mom.
CC DC 06
Maint. Maint. Mom.
07
(Non-illuminated
Mom. Maint. Maint.
switches only)
28 Honeywell1 Sensing and Control1 1-800-537-6945 USA1 F1-815-235-6847 International 1 1-800-737-3360 CanadaManuals
Manual Switches AML25 Series
Electronic Control Paddle
LED DISPLAY FEATURES
Electrical Data page 19
1 Identical to AML23, except furnished
Paddle Covers page 48
with one or two rectangular high
Lamps and LEDs page 58
efficiency LEDs which give flush
Accessories page 57
display area and wide angle
Mounting Dimensions pages 59, 62
indication.
1 Available with or without diode 1 5 thru 24 VDC devices have internal
resistor to maintain current at nominal
protection for LEDs.
20 mA.
1 LED circuit independent of switch
1 UL recognized, CSA certified.
circuit.
*
Covers with LED window ordered separately.
*
*AML25 Series: 1 pole and
2-pole only.
AML25 ORDER GUIDE
AML25 F B B 2 AA 01 R X
Housing Operator/ LED Terminal Type/ Circuitry Operating LED Color LED Color
Type Bezel Color Voltage Diode Protection Codes Code (LED A) (LED B)
AML25 F B B 2 Insert code Insert code RR
Rectangular Black/Black V* .110 .020 letters numbers Red Red
1 LED (Solder or Q-C) as shown in from YY
C Circuitry Operating Yellow Yellow
AML25 G 5V 3 Chart Action GG
Rectangular .025 .025 Chart Green Green
2 LEDs D (Printed Ckt., XX
10 V or Push-On LED version No LED No LED
available
E8 only with
15 V .110 .020 AA
w/Diode BA
F protection CA
24 V DA
circuitry
*See LED application information for devices without current-limiting resistor, page 58.
Example: AML25FBB2AA01RX
Rectangular paddle switch; illuminated
with one red LED, this device has a black
paddle and bezel, and .110 .020 termi-
nals; with one circuit ON and one circuit
OFF in each extreme operator position
(maintained).
Covers
ordered
NOTE: For further information on re-
separately 1 The MICRO SWITCH identification is
placement LEDs, call the 800 number.
shown on this side of the switch housings.
Honeywell1 Sensing and Control1 1-800-537-6945 USA1 F1-815-235-6847 International 1 1-800-737-3360 Canada 29