FF6-10-AC-06 Honeywell

Installation Instructions for the ISSUE 1 FF Series Magnetically Actuated Safety 50026830 Interlock Switches FIGURE 2. SWITCH ALIGNMENT (FF2 AND FF3) WARNING IMPROPER INSTALLATION Consult with local safety agencies and their requirements when designing a machine-control link, interface, and all control elements that affect safety. Strictly adhere to all installation instructions. FIGURE 3. SWITCH ALIGNMENT (FF5) Failure to comply with these instructions could result in death or serious injury. GENERAL INFORMATION When installed on a machine guard, and the switch and actuator are within the specified operating range, the safety contacts will be closed and the auxiliary contacts will be open. (See table for switching distances). When the actuator moves out of the operating range, the safety contacts will open. The auxiliary contacts will close for indication. The FF series safety switches and actuators are designed to approach each other from most angles. When the switch is closed, the targets on the printed face of the switch must align. MOUNTING INFORMATION The FF safety switches can approach each other from most angles. When the switch is closed, targets on the printed face must align. See figure 1. Mount the switch on the machine frame and the actuator FIGURE 1. SWITCH ALIGNMENT (FFS AND FF6) on the opening edge of the door. Always try to mount the switch on non-ferrous material. Ferrous material may reduce the switching distance. Be sure to use tamper- proof screws. Do not use the safety switch as a door stop. Leave a minimum of 50 mm 1.97 in between any adjacent switches. See figures 4 and 5. Sensing and Control FF Series Magnetically Actuated Safety Issue 1 50026830 Interlock Switches FIGURE 4. DO NOT USE THE SAFETY SWITCH AS A When fixing the safety switch to a sliding door (A), DOOR STOP ensure that when the door is opened (B) it is not easily accessible, helping prevent the system being overridden. See figure 6. FIGURE 6. PLACEMENT FOR SLIDING DOORS FIGURE 5. MINIMUM DISTANCE BETWEEN SWITCHES SPECIFICATIONS Type FF2-10-AC FF2-10-DC FF3-20-AC FF3-20-DC FF5 FF5-SS FF2-11-AC FF2-11-DC FF3-21-AC FF3-21-DC Contact 1NC (FF2-10-AC) 1NC (FF2-10- 2NC (FF3-20-AC) 2NC (FF3-20- Max: 2NC safety Max: 2NC safety arrangement 1NC/1NO (FF2- DC) 1NC/1NO 2NC/1NO (FF3- DC) 2NC/1NO and 1NO auxiliary and 1NO auxiliary 11-AC) (FF2-11-DC) 21-AC) (FF3-21-DC) Safety contact 230 Vac/2 A 30 Vdc/1 A 230 Vac/2A 30 Vdc/1 A 24 Vdc/0.3 A 24 Vdc/0.3 A rating inductive/ resistive inductive/ resistive inductive/resistive inductive/resistive Safety contact 10 mm 0.4 in 10 mm 0.4 in 10 mm 0.4 in 10 mm 0.4 in 6 mm 0.24 in 6 mm 0.24 in operating distance ON 30 mm 1.18 ON 30 mm 1.18 ON 35 mm 1.38 ON 35 mm 1.38 ON 17 mm 0.67 ON 17 mm 0.67 in OFF in OFF in OFF in OFF in OFF in OFF Safety contact 3 ms/2.1 ms/ 3 ms/2.1 ms/ 3 ms/2.1 ms/ 3 ms/2.1 ms/ 3 ms/2.1 ms/ 3 ms/2.1 ms/ close/drop/bounce 0.7 ms 0.7 ms 0.7 ms 0.7 ms 0.7 ms 0.7 ms Auxiliary contact 15 W/10 VA 15 W/10 VA 15 W/10 VA 15 W/10 VA 24 Vdc/0.3 A 24 Vdc/0.3 A rating inductive/resisitive inductive/resisitive Auxiliary contact 7 mm 0.28 in 7 mm 0.28 in 7 mm 0.28 in 7 mm 0.28 in 6 mm 0.24 in 6 mm 0.24 in operating distance OFF 14 mm OFF 14 mm OFF 20 mm OFF 20 mm OFF 17 mm 0.67 OFF 17 mm 0.67 0.55 in ON 0.55 in ON 0.79 in ON 0.79 in ON in ON in ON Auxiliary contact 0.5 ms/0.3 ms/ 0.5 ms/0.3 ms/ 0.5 ms/0.3 ms/ 0.5 ms/0.3 ms/ 0.5 ms/0.3 ms/ 0.5 ms/0.3 ms/ close/drop/bounce 0.7 ms 0.7 ms 0.7 ms 0.7 ms 0.7 ms 0.7 ms Internal fuse ac: 2 A fast dc: 1 A fast ac: 2 A fast dc: 1 A fast Not applicable Not applicable acting acting acting acting External fuse ac: 1.6 A fast dc: 0.8 A fast ac: 1.6 A fast dc: 0.8 A fast dc: 0.2 A fast dc: 0.2 A fast (cust. supplied) acting acting acting acting acting acting IP rating IP67 IP67 IP67 IP67 IP67 IP67 Vibration/shock 50 Hz to 100 Hz/ 50 Hz to 100 Hz/ 50 Hz to 100 Hz/ 50 Hz to 100 Hz/ 50 Hz to 100 Hz/ 50 Hz to 100 Hz/ 10 g 10 g 10 g 10 g 10 g 10 g Operating -10 C to 55 C -10 C to 55 C -10 C to 55 C -10 C to 55 C -10 C to 55 C -10 C to 55 C temperature 14 F to 131 F 14 F to 131 F 14 F to 131 F 14 F to 131 F 14 F to 131 F 14 F to 131 F Mounting and Target to target Target to target Target to target Target to target Target to target Target to target fixture Construction Red ABS resin Red ABS resin Red ABS resin Red ABS resin Red ABS resin 316 grade filled filled filled filled filled stainless steel resin filled 2 Honeywell Sensing and Control