FS01 Honeywell

Pressure Sensors FS01/FS03 Force Sensors FS Series FEATURES 0 to 1.5 pounds and 0 to 3.0 pound ranges High-level output range Temperature compensated Calibrated zero and span Small size Low noise The FS01/FS03 sensors are special low cost, peizoresistive-based force TYPICAL APPLICATIONS sensors. These high-level voltage output, calibrated, and temperature Medical infusion pumps compensated sensors give an accurate and stable output over a 5 C to Ambulatory noninvasive 50 C 41 F to 122 F temperature range. They offer simple operation from pump pressure a single 5.0 Vdc supply. Operation from any DC supply voltage, up to Occulsion detection 12.0 Vdc, is acceptable. Kidney dialysis machines The FS01/FS03 sensors feature an integrated circuit sensor element and Load and compression laser trimmed think film ceramic in a small plastic housing. Their extremely sensing small size enables the use of multiple sensors in limited available space. Variable tensions control This package also provides excellent corrosion resistance and isolation to external package stress. WARNING WARNING MISUSE OF DOCUMENTATION PERSONAL INJURY DO NOT USE these The information presented in this product sheet is for reference only. Do products as safety or not use this document as a product installation guide. emergency stop devices or Complete installation, operation, and maintenance information is provided in any other application in the instructions supplied with each product. where failure of the product Failure to comply with these instructions could result in death or could result in personal serious injury. injury. Failure to comply with these instructions could result in death or serious injury. Sensing and Control Pressure Sensors FS01/FS03 Force Sensors FS Series PRESSURE SENSOR SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS 5 C to 50 C Max. Ratings Compensated temperature 41 F to 122 F Supply voltage, Vs 12.0 Vdc 0 C to 70 C Maximum over load 3.18 kg 7 lbs Operating temperature 0 F to 158 F Lead temperature 220 C 428 F -20 C to 85 C (soldering 2-4 seconds) Storage temperature 13 F to 185 F Humidity limits 0% RH to 95% RH STANDARD FORCE RANGES Full-Scale Span Part Number Operating Force Maximum Force Min. Typ. Max. 0 lbs to 1.5 lbs FS01 7 lbs 2.85 Vdc 3.0 Vdc 3.15 Vdc 0 kg to 0.68 kg 0 lbs to 3.0 lbs FS03 7 lbs 2.85 Vdc 3.0 Vdc 3.15 Vdc 0 kg to 1.36 kg PERFORMANCE SPECIFICATIONS Min. Typ. Max. Unit Zero force offset 0.95 1.0 1.05 Vdc (2) Full scale span 2.85 3.0 3.15 Vdc Linearity 1.0 3.0 %FSS (3) Hysteresis 0.5 %FSS (4) Temp effect on Span (0 C to 50 C 0 F to 122 F ) 1.0 2.5 %FSS (4) Temp. effect on Offset (0 C to 50 C 0 F to 122 F ) 1.0 2.5 %FSS (5) Creep 0.5 %FSS (6) Long-term stability of Offset and Span 1.0 %FSS Specification Notes: Note 1: Reference conditions (unless otherwise noted): Supply voltage, Vs = 5 Vdc T = 25 C 77 F A Note 2: Full-scale Span is the algebraic difference between the output voltage at full-scale load and the output at zero load. Span is ratiometric to the supply voltage. Note 3: Hysteresis is the maximum output difference at any point within the operating pressure range for increasing and decreasing load. Note 4: Maximum error band of the offset voltage and the effort band of span, relative to the 25 C 77 F reading. Note 5: Maximum difference in output at full-scale load in a 20 minute period. Note 6: Maximum difference in output within any operating force after 1 million force cycles 2 Honeywell Sensing and Control