Sensing and Control Interactive Catalog... www.honeywell.com/sensingLimit/Enclosed Limit and Enclosed Switches HDLS Series Modification and Replacement Parts PLUG IN RECEPTACLES Non plug-in type Plug-in type Type Catalog Listing Single-Pole LSZ4001 Double-Pole LSZ4002 3 4 in. Conduit Double-Pole LSZ4006 1 2 in. Conduit Single-Pole LSZ4015 Manifold Mount Double-Pole LSZ4016 Manifold Mount ADAPTER PLATES These adapter plates enable HDLS plug-in switches to retrofit 200LS series (single- pole) and 300LS series (double-pole) plug- in switches. Catalog Type Listing Adapts 200LS series LSZ4003 mounting to accept HDLS Adapts 300LS series LSZ4004 mounting to accept HDLS INDICATOR LIGHTS/SEAL RING Type Catalog Listing 120V LSZ4007 240V LSZ4008 REPLACEMENT WOBBLE ACTUATORS ADJUSTING TOOL KIT This tool kit is used if readjustment of switch- Catalog Listing es is necessary when heads and/or contact blocks are replaced. Catalog Listing LSZ4005 REPLACEMENT LEVERS To order replacement levers, specify the same part number that is metal stamped on either the lever or lever hub. For a complete list of HDLS replacment parts, refer to the charts on the following pages. CONDUIT SEALING PACKETS Delrin Spring Cat Coil Rod Wire Cable Whisker Spring Catalog LSZ4009 LSZ4010 LSZ4011 LSZ4012* LSZ4014 Listing 1 1 *5 2 inch long. For 7 2N length, order LSZ4013. Packet Cable O.D. Inches 2PA6 .400N - .435N MICRO SWITCH conduit sealing packets 2PA16 .435N - .470N can be used with limit or enclosed switches. 2PA1 .530N - .570N This includes the HDLS, Compact LS, ML, E6, V6, BAF1 or OP series switches. LIQUID TIGHT CONDUIT FITTING The conduit sealing packets are not suitable for use with explosion-proof switches. 2PA17 .170 - .470 NPT 2PA19 .450 - .709 NPT Honeywell1 Sensing and Control 1 1-800-537-6945 USA1 F1-815-235-6847 International 1 1-800-737-3360 Canada A49