Sensor Evaluation Kit, SEK002 For Use with APB Series (Digital Versions Only) and MPR Series Board Mount Pressure Sensors, Honeywell HumidIcon Digital 32333738 Humidity/Temperature Sensors, and HPM Series Particle Sensors Issue A Datasheet VALUE TO CUSTOMERS Quicker, easier sensor evaluation: The SEK002 and associated Honeywell software simplify sensor evaluation and demonstration by eliminating the need for the customer to develop any code before seeing sensor measurements. Remote mounting: In addition to being mounted on the SEK002, the sensor may also be mounted remotely if, for example, it is to be mounted in an oven for testing or in a prototype product for proof-of-concept testing of the customers end product. Cost-effective: Provides a cost-effective way learn about the capabilities of our sensors so customers can make better informed component decisions faster. Customers are then DESCRIPTION able to perform a thorough evaluation of the sensor without The Sensor Evaluation Kit, SEK002, provides an easier way to needing to develop additional code. demonstrate and evaluate the following Honeywell sensors: Expedites development: As the SEK002 allows customers Basic Board Mount Pressure Sensors, ABP Series (digital to test their product, this helps customers to expedite their versions only) development process. MicroPressure Board Mount Pressure Sensors, MPR Series Honeywell HumidIcon Digital Humidity/Temperature FEATURES Sensors: HIH6000 Series, HIH6100 Series, HIH7000 Series, The SEK002 has sockets and solder pads to receive the HIH8000 Series, HIH9000 Series compatible sensors. The board is then plugged in as a Particle Sensors, HPM Series shield board to the user-provided Arduino Uno Rev3 board. (All sensors are sold separately. Only one sensor may be The kit interfaces a selected sensor to an Arduino Uno Rev3 evaluated at a time.) Microcontroller Board. Honeywell software, which is provided Jumpers allow the user to select the sensor to be used, 2 free and is downloadable at Sensor Evaluation Kit, SEK002 1 Table 1. Sensor Evaluation Kit Contents and User-Provided Items Honeywell Sensor Evalution Kit, SEK002 User-Provided Components Includes: Arduino Uno Rev3 Microcontroller Board (A000066) Sensor Evaluation Board Jumpers for the ABP Series ABPDLNN100MG2A5 preconfigured on the board Jumpers USB Interface Cable (Type A Jumper Wires (for use with Male to Type B Male) remote connections) Jumpers PC with Internet access (Note: If using a docking station computer, ensure that the computer is not in its docking station when installing and running the software.) 1 The Honeywell sensor is not included with the SEK002. The user must purchase the sensor separately. 2 Sensing and Internet of Things