Interactive Catalog Replaces Catalog Pages Honeywell Sensing and Control has replaced the PDF product catalog with the new Interactive Catalog. The Interactive Catalog is a power search tool that makes it easier to find product information. It includes more installation, application, and technical Click this icon to try the new information than ever before. Interactive Catalog. Sensing and Control Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Hall Effect Products Surface Mount Sensors SS5 Series FEATURES/BENEFITS Wide temperature and voltage ranges for design flexibility and harsh (automotive)environments. Temperature compensated for consistent operation with low-cost magnets (SS500). SS5 Series Hall effect position sensors are operated by the magnetic SS5 Package is resistant to field from a permanent magnet or electromagnet. The small SOT89 style thermal and mechanical package surface mounts on PC boards and flexible circuits. The SS5 uses stress. a industry standardgull-win design which makes it less susceptible to SS5 profile is lower thansolder bridgin and allows increased circuit board density. The SS5 other SOT-89 packages. series package can accommodate larger ICs than SS1 and allows for four- This allows the customer to pin designs reduce the total gap. The integrated circuits are designed to provide predictable performance Industry standardgull-win over the full temperature range of -40 to +150C. Bipolar, unipolar and design. Less susceptibility to latching magnetics are available. The SS5 has the same footprint and pin-solder bridgin. Allows out as the industry standard SOT-89. It will replace Honeywell SS1 Series increased circuit board and any equivalent SOT-89 sensors from other suppliers with minimum or density. no design changes. Bipolar, unipolar and latching On-board regulation provides extremely stable operation over the full magnetics. supply voltage range of 4.5 to 24 VDC(SS51T) or 3.8 to 30 VDC(SS500). Low Gauss versions Current consumption is a low 10 mA maximum at 40C and is typically available for high accuracy 7mA or less at room temperature and above. SS5 sensors are capable of or wide gap applications. continuous 20 mA sinking output, and can withstand temporary current as SS5 package allows 4-pin high as 20 mA maximum (SS51T) or 50 mA maximum (SS500). They can package designs use existing power supply sources in most applications, and can be directly interfaced with many electronic components without buffering or TYPICAL APPLICATIONS compensation circuitry. Brushless DC motors SS5 Series sensors are supplied on tape and reel for high-volume, Digital current sensor automated pick and place equipment. Each reel contains 1,000 sensors. Anti-skid braking sensor MICRO SWITCH supplies bar and ring magnets for operating Hall effect Piston detection in hydraulic sensors. Bar magnets can operate any Hall effect sensor. Ring magnets cylinder are magnetized on the outside diameter with alternating North and South Valve position sensing poles. They are particularly useful with bipolar sensors and rpm Cam, lever, shaft position measurement. sensing Tachometer, counter pickup Push-button sensor Disk speed, tape rotation, flow rate sensing Speed sensing - rate, under, over speed Remote reading sensor Magnetic card reader HONEYWELL Sensing and Control