SensSensing and Controling and Control WLS1A00AD ( Home : Products : Wireless : Limitless Sw itches : Limitless Heavy Duty Limit Sw itches : WLS ) Limitless WLS Series Heavy-duty Limit Sw itch, US/Canada, top roller plunger WLS1A00AD Actual product highres photo appearance may vary. WLS1A00AD lowlow res photores photo Product Specifications Availability United States Canada Australia Europe Country Use US, Canada, and Mexico Operating Force (OF) 17,79 N 4 lb max. Full Overtravel Force 31,13 N 7 lb Pretravel (PT) 1,78 mm 0.07 in max. Overtravel (OT) 4,83 mm 0.190 in min. Differential Travel (DT) 0,38 mm 0.015 in max. Product Type Limitless Wireless Limit Sw itches Actuator Top Roller Plunger Circuitry 1NC 1NO SPDT Snap Action Supply Voltage 3.6 Vdc (from battery) Housing Material Zinc Die Cast, Pow der-coated Phosphate Epoxy Finish Housing Type EN 50041 Series Name WLS Shock IEC 60068-2-27 Half-sine, 10 g, 6 mS, 3 axis Vibration IEC 60068-2-6 10 Hz to 500 Hz w ith 0,35 mm peak-to-peak, 58 Hz to 500 Hz 5 g Sealing IP67, NEMA 1, 3, 4, 6, 6P, 12, 13 Approvals FCC 15.247 Industry Canada RSS 210 ETSI, CE mark ACMA, C-Tick mark Expected Mechanical Life Head tested in excess of 50 million cycles Operating Temperature -40 C to 85 C -40 F to 185 F Agency Approvals and FCC 15, IC, ACMA, ETSI, RoHS Compliant Standards UNSPSC Code 20142601 UNSPSC Commodity 20142601 Sealed IP67 Operating Position (OP) 55,88 mm 1,02 mm 2.20 in 0.040 in Sw itch Type Wireless Heavy-Duty Limit Sw itch Radio WPAN 802.25.4 2.4 GHzProduct Specifications Antenna Type None Antenna Type None Softw are Version Version 1 Softw are Version Version 1 Signal Range 305 m 1000 ft Signal Range 305 m 1000 ft Battery 3.6 Vdc Lithium Thionyl Chloride 2/3AA size Battery 3.6 Vdc Lithium Thionyl Chloride 2/3AA size Battery Life Up to three years (depending upon factors) Battery Life Up to three years (depending upon factors) EMC Latest applicable standards: EN 300 328, V1.7.1 EN 61326-1 (2006) EN 301 489-1, EMC Latest applicable standards: EN 300 328, V1.7.1 EN 61326-1 (2006) EN 301 489-1, V1.8.1 EN 301 489-17, V2.1.1 V1.8.1 EN 301 489-17, V2.1.1