Wireless Non-Contact Switch (WLS Series) Limitless Switch DESCRIPTION Honeywells Limitless product line uses the latest commercial product, machine, equipment, etc. The Limitless WLS Non- off-the-shelf wireless technology. The Limitless WLS Series Contact Switchs design features an industrial grade reed switch. is especially beneficial for remote monitoring applications Customers can choose how the reed switch is oriented within the where wiring or wire maintenance is not physically possible or switchs plastic head, i.e., either top- or side-sensing. Combining economically feasible. this greater flexibility with proven harsh-duty packaging can result in increased efficiencies and improved safety for industrial Honeywell is expanding the Limitless product line with its machines, equipment, OEMs, and operators. industrial Wireless Non-Contact Switch that provides non-contact presence/absence detection of a variety of different magnet styles and magnetic actuators installed on the end-users FEATURES BENEFITS Wireless design Allows non-contact actuation Radio (license-free and global): WPAN 802.15.4, 2.4 GHz, Enables presence/absence detection in remote par ts of ap- point-to-point plication/machiner y, where wiring is an issue or not feasible FCC 15, IC, ACMA, ETSI, COFETEL, WPC & IDA Able to reconfigure and network multiple switches, or Up to 305 m 1000 ft line-of-sight communication range point-to-point with personalized addresses, which allows when used with a Limitless wireless monitor or receiver for adding, subtracting or relocating of the Limitless WLS module (sold separately) Non-Contact Switches Reliable, flexible, and secure wireless transmission Reduced installation/maintenance costs with no wires, con- Replaceable batter y with ultra-low power consumption duit, strain relief, clips, connectors, connection boxes, etc. Direct or remote mount antenna options Eliminates issues with wire connection integrity on moving equipment Mechanical design Consumes ultra-low power to prolong batter y life IP67 NEMA 1, 4, 12, 13 Top and side sensing heads APPLICATIONS Zinc head and body are phosphate treated and epoxy Machine tools finished Packaging machiner y Lifts Ag/construction equipment Industrial machinesLimitless Series Table 1. General Limitless WLS Series Specifications Characteristic Parameter Series name WLS Series Product type Limitless Non-Contact Switch Availability Global, license-free bands Operating characteristics Operating point: 3,81 mm 0.15 in min. Release point: 15,24 mm 0.60 in max. with use of WMG1 magnet (included with WLS Series Non-Contact Switch) Sensing target Top and side of head Housing material Zinc head and body are phosphate treated and epoxy finished 30% glass-filled PBT plastic head Housing type WLS Radio type WPAN 802.15.4 2.4GHz Communication agency - FCC 15.247: United States of America - IC RSS 210: Canada approvals/certificates* - COFETEL: Mexico - ETSI, CE mark: European countries - ACMA, C-TICK: Australia - IDA: Singapore - WPC: India Antenna type RP-SMA jack for direct or remote mount antenna options omni directional standard Signal range Nominal 305 m** 1000 ft ** Clear line-of-sight between Limitless switch and monitor/receiver when using 2.2 dBi integral antenna Internal power option 3.6 Vdc Lithium Thionyl Chloride 2/3 AA size (Est. life >1yr) Manufactured by Green Energy, par t number ER14335M (battery) Sealing IP67 NEMA 1, 4, 12, 13 EMC Latest applicable standards: EN 300 328, V1.7.1 EN 61326-1 (2006) EN 301 489-1, V1.8.1 EN 301 489-17, V2.1.1 Shock IEC 60068-2-27 half sine, 10 g, 6 mS, 3 axis Vibration IEC 60068-2-6 10-58 Hz w/ 0,35 mm peak-to-peak - 5g Operating temperature -40 to 85 C -40 F to 185 F *Honeywell is continuing to add new Countr y Communication Agency Approvals as oppor tunities and requirements are established **Actual range will var y depending upon antennas, cables, and site topography. NOMENCLATURE TREES Limitless WLS Series Non-Contact Switch Nomenclature WLS 1 00 A Q RS2 A Country Use Operating Modication Code Specials Antenna Switch Type Gen Code RF Code (RS2 only) Code Head Code Type Code Internal battery w/ WLS Series 2.4 GHz No antenna RP-SMA US, Canada, Head assembled Version 1 1 See specials reed switch target A 00 A Q RS1 connector jack IEEE 802.15.4 Mexico with target to label side on top of head Wireless All other Internal battery w/ 2.2 dBi omni w/switch Head assembled approved reed switch target 02 B 3 RS2 mount tilt/swivel with target to right side 1, 2, 3 on side of head countries 1 Use with antenna type 0 dBi omni w/ switch Head assembled 4 11 mount straight design codes 00 - 03, 05, 10, 11 with target to left side only usage also allowed in Country Code A. Head assembled with target to mounting 5 surface 2 Some countries require specic communication certications. Contact Honeywell for existing certication information. 3 If Limitless devices are used on machinery that may shipped globally, 2 Honeywell Sensing and Control use country code B.