Interactive Catalog Replaces Catalog Pages Honeywell Sensing and Control has replaced the PDF product catalog with the new Interactive Catalog. The Interactive Catalog is a power search tool that makes it easier to find product information. It includes more installation, application, and technical Click this icon to try the new information than ever before. Interactive Catalog. Sensing and Control Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Basic Switches WW Series Door GENERAL INFORMATION FEATURES The WW Series switching mechanism is a 1 Snap-in panel mounting non-snap double break shorting bar type 1 Variety of terminal sizes construction. One, two or three circuit ver- 1 Accepts quick-connect insulated sions are available. terminals 1 10-16 amps electrical rating at 125 or The three-circuit unit has two poles. The 250 VAC depending on number of cir- term pole denotes the number of com- cuits and termination pletely separate circuits that can pass 1 Same panel cutout as double-pole DM through the switch at one time. On a switch three-circuit switch in the unoperated 1 Quick-connect D7 and D9 termination condition (see drawing) circuit 2 is complies with VDE requirements for closed and circuit 1and 3 are open. As 3mm air gap the plunger is depressed, circuit 2 1 Switches with plunger guards and D7, opens and circuit 1 and 3 are closed. D9 terminations are VDE approved The switch is two-pole since it makes and 1 UL recognized, CSA certified breaks two separate circuits ( 1 and 3). 1 Meets ULs 100,000 operations re- When the plunger is released, circuit 1 quirement for operator-accessible in- and 3 are broken and circuit 2 is terlock switches closed. 1 Covered under UL standard 508 Indus- trial Motor Controls WWs are available with or without a plun- ger guard. A cheat-key can be furnished for use with the plunger guard to maintain the switch plunger in the depressed con- Plunger guard version and cheat-key. dition (see photos ). With cheat-key installed. MOUNTING DIMENSIONS (For reference only) NOTE: Terminals will accept quick-connect receptacles available from AMP, Hollingsworth and others. 92 Honeywell Sensing and Control For application help: call 1-800-537-6945.