CP464-080-080-04-S-2 H S Marston

COMPONENT MOUNTED CP SERIES HEAT SINKS High Performance- Low Profile- Low Weight Certain applications or harsh environments will require additional cooling to ensure the integrity and long life of the electronics at the heart of your system. To meet these requirements HS Marston have developed the CP series of heat sinks. The large surface area and turbulence in the air flow provided by the corrugated Fig. 1 construction ensure high levels of efficiency whether moving air is provided from an external PERFORMANCE source or from an integral fan. Part number A B FIGURE C/W This construction provides a light and compact heat sink which CP100-030-030-02-A-100 30 4.6 7 1 outperforms standard extrusions of similar size. CP100-035-035-02-A-100 35 4.6 5.5 1 CP100-048-048-02-A-100 48 4.6 3.5 1 Further improvement in performance can be obtained by CP100-060-060-02-A-100 60 4.6 2.5 1 attaching a fan directly to the heat sink. Fans can be attached CP250-035-035-02-A-100 35 8.5 4 1 to the heat sink using our CP250-048-048-02-A-100 48 8.5 3 1 adhesive fan gaskets making use of the latest adhesive technology CP250-060-060-02-A-100 60 8.5 1.9 1 which is widely used in the automotive industry. These CP464-048-048-02-A-100 48 14 2.1 1 gaskets provide a thermal barrier between the fan and the heat CP464-060-060-02-A-100 60 14 1.1 1 sink. They may also help reduce Performance based on 3 m/s airflow the effects of any vibration created by the fan due to bearing wear etc... This series of heat sinks has found many applications in situations where high performance is required coupled with severe restrictions on space and height. If you cannot satisfy your requirements from the standard range shown here, then please contact us. We will be pleased to Fig. 2 advise you on the performance and application of sizes other than those illustrated here. Part number A B C D PERFORMANCE C/W Figure CP100-030-030-02-S-100 With fan 30 25 10 16 5 2 The material and flatness of the heat source are crucial CP100-035-035-02-S-100 With fan 35 25 10 16 3.9 2 factors in the selection of the correct thermally conductive CP100-048-048-02-S-100 With fan 48 40 10 16 1.9 2 adhesive tape to be used for CP100-060-060-02-S-100 With fan 60 60 10 16 1.8 2 attaching the heat sink to the chip. Please consult our CP250-035-035-02-S-100 With fan 35 25 10 20 3 2 sales/engineering department for assistance in choosing the CP250-048-048-02-S-100 With fan 48 40 10 20 1.3 2 correct tape before ordering. CP250-060-060-02-S-100 With fan 60 60 10 20 1.1 2 CP464-048-048-02-S-100 With fan 48 40 10 25 1.2 2 CP464-060-060-02-S-100 With fan 60 60 10 25 0.7 2 Performance based on 25mm, 40mm and 60mm fans mounted on the heat sink as shown. HS MARSTON AEROSPACE LTD, WOBASTON ROAD, FORDHOUSES, WOLVERHAMPTON, WV10 6QJ TEL: +44 (0)1902 623500 FAX: + 44 (0)1902 623519 X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for h s marston manufacturer: Other Similar products are found below : 150CN-02000-A-200 97CN-01000-A-200 05DN-00500-A-200 CC001 890SP-02000-A-100 43DN-01500-A-200 938SP-02000-A-200 94DN-02500-A-200 43DN-02500-A-200 890SP-03000-A-100 97CN-02500-A-200 150CN-01250-A-200 11DN-00500-A-1SX CP464-100- 100-04-S-2 890SP-01000-A-100 02HN-00500-A-200 11DN-01000-A-2SX 96CN-02000-A-200 11DN-01500-C-1SX