RF Wireless RGB Controller from Inspired LED The RF Wireless RGB Controller from Inspired LED is a sleek, convenient solution to controlling RGB LED Lighting. Choose from 15 different pre-programmed color changing modes, or simply select one of 24 solid colors from the color wheel, by using the remote from up to 65 feet away from the controller. Turn the entire system on and off with the remote - when the system is turned back on, the previous setting will be resumed. Key Function 1 On/Off 2 Change Pre-Programmed Setting 3 White Light / Color Light How to Use the RGB Controller 4 Increase Brightness/Speed Connect a 12V power supply to the positive and negative input teminals, or use Connect Power 5 Decrease Brightness/Speed the optional power input on the back. Connect 4-conductor cable from RGB LEDs to controller, maintaining consistency Connect LEDs Pre-Programmed Color Changing Mode Chart for Key 2 between V+, R, G, and B. Mode Key 4/5 Function Description Press Key 1 to turn the RGB LEDs on or off in any state. On/Off 1 8 grades of Brightness Auto Color Changing Press Key 3 once to activate white light mode. Press Key 3 again to activate 2 Three Color Jump Solid Color color light mode, and select a desired color by using the touch wheel. Change 3 Seven Color Jump 8 grades of Speed brightness in either mode by pressing Key 4 or Key 5 . 4 Three Color Gradual Pre-Programmed Press Key 2 to activate light changing mode, cycle through 15 pre-programmed 5 Seven Color Gradual modes by pressing Key 2 again. Color Changing 6 Blink Red Press Key 4 once within three seconds of connecting power to the controller to 7 Blink Blue match the remote to the controller. The connected lights will blink 3 times if 8 Remote Match Blink Purple successfully matched. One remote may be matched to multiple controllers. 9 8 grades of Brightness Blink Green Press Key 4 five times within three seconds of connecting power to the controller 10 Blink Yellow to clear a remote from a controller. The connected lights will blink 6 times if 11 Remote Clear Blink Cyan successfully cleared and the remote will no longer influence the controller. 12 Blink White Please dont touch or press the touch wheel within 3 seconds of loading the 13 Blink Red/Blue Alternately batteries to protect the sensitivity of the remote. If the touch wheel loses 14 8 grades of Speed Remote Sensitivity Blink Green/Blue Alternately sensitivity, remove and reinstall the batteries. 15 Blink Red/Green Alternately Note: Individual RGB LED runs should not exceed 196 inches. Beyond this point voltage drop across the internal circuit traces creates visible variation in color intensity along the length of the strip. Inspired LED 1733 E. McKellips Rd. Suite 111 Tempe, AZ 85281 (480) 941-4286 www.inspiredled.com