Data Sheet AT-4000 CON Series Advanced Wire Tracer Amprobes reputation for out-performing circuit tracers has just gotten better. These new and improved advanced trac- ers combine features and functions to make your job easier. AT-4001 CON Advanced Wire Tracer with Soft Case AT-4003 CON Advanced Wire Tracer AT-4004 CON Advanced Wire Tracer w/Clamp-On Attachment AT-4005 CON Advanced Wire Tracer w/Clamp-On Attachment, Battery Booster & Charger Extremely easy to use One universal transmitter - automatically switches to work with either energized or non-energized systems Receiver not position sensitive - does not need to be rotated in order to provide accurate readings No hassle Precise sensitivity adjustment warranty Traces live wires buried or hidden behind walls No waiting. Traces energized and non-energized (open, broken) wires No shipping Performs tests without having to interrupt power charges. Locates breakers, neutrals, and ground lines Our commitment to Locates & traces wires in high-quality products walls, floors, conduit, and customer service computer cables, etc. is demonstrated by our industry exclusive Pinpoints shorts, ground No Hassle warranty. faults and broken wires In the unlikely event Does not interfere with that an Amprobe Test sensitive electronic Tool requires warranty equipment service, any of our local dealers are Battery Booster authorized to replace strengthens signal for it, on the spot. open tracing Clamp-on attachment injects (note: 500 MSLP limit) signal for non-contact operation No hassle one-year warranty Patent 6,940,289 Amprobe Test Tools www.Amprobe.comData Sheet AT-4000 CON Series Advanced Wire Tracer General Specifications Transmitter Operating Voltage: 9-600 VAC Operating Frequency: 32.786 kHz Receiver Range Short Mode (in air): 20 in air from the traced wire under test conditions Receiver Range Open Mode (in air): 12 in air from the traced wire under test conditions Operating Temperature: -18C to 49C (0 to 120F) Storage temperature: -40 to 66C (-40 to 150F) Case Material: ABS Case Size: 14x6.7mm) 0.55 x 0.26) Weight (AT-4005 CON): 8.20 lbs. R-4000 CON Receiver Detectors: Electromagnetic Coil Array pick up for short mode. Electrostatic plate pick up for open mode. Sensitivity: Low, Mid, High gain with precise sensitivity adjustment (thumbwheel). Short Mode performance: Over 20 in air from the traced wire under test conditions. Open Mode performance: Over 12 from the traced wire in air under test conditions. 50HZ, 60HZ, and 400HZ Rejection: 120db Power Source: 9V alkaline battery Display: 10 LEDs Case: Flame retardant ABS Weight: 0.5 Lb. (113g) T-4000 Transmitter Operating voltage: 9-600 volts Operating frequency: 32.768 KHZ Duty Cycle: Transmit 2 pulses with a duration of 0.0625S each, every 0.5 seconds Case: Flame retardant ABS Display: LCD (Liquid Crystal Display) Weight: 0.32 LB (143.5g) Current Output of the Signal: Low Mode: 11 mA average, 30 mA peak Medium Mode: 12 mA average, 36 mA peak High Mode: 13 mA average, 63 mA peak Fuse: Fast acting 250 mA 1000V (6X46mm) P/N: FA6X46MM Signal Output (9V supply): High setting: 0.74 VAC Medium setting: 0.61 VAC Low setting: 0.53 VAC Battery: 9V alkaline- 24V jack will accept battery pack accessory (B2024 or B2025) A2202 Clamp-on Transmitter Accessory Operating Frequency: 32.768KHZ as supplied by T-4000 Case Breakdown Voltage: 3000 volts Maximum Wire size: 2000 MCM or 2 dia. Cable Battery: None, power is supplied by T-4000 B2024 Battery Pack T-4000 B2024 Battery Pack Type: Nickel-Cadmium rechargeable (20 AA cells) Capacity: 24-Volt, 600 mah Rechargeable Time: 14 hours Fuse: internal self-resetting B2025 Recharger/Converter Input: 115VAC Output: 24 VDC 350 mah Amprobe Test Tools www.Amprobe.com