Data Sheet SENCITY Rail Low Profile Antenna 1399.17.0125 Description Railway rooftop antenna for 2G/3G/4G cellular and Wi-Fi 4/Wi-Fi 6 bands. Multiple Antenna installations support Cellular and Wi-Fi MIMO. Rugged design, meets EN 50155 railway standard. Fire retardant acc. to EN 45545-2. Extremely low profile (40mm). Product Configuration Technical Data Electrical Data Band 1 Band 2 Band 3 Band 4 Frequency (MHz) 790 - 806 806 - 870 870 - 960 1350 - 2700 VSWR 2.2 1.9 1.6 2 Impedance (Ohm) 50 50 50 50 Gain (dBi) 5 5 5 5 Composite power max (W) 550 550 550 350 Ambient temperature (C) 25 25 25 25 Band 5 Frequency (MHz) 4900 - 6425 VSWR 2.1 Impedance (Ohm) 50 Gain (dBi) 8 Composite power max (W) 300 Ambient temperature (C) 25 Ports Port 1 Connector N, jack (female) Polarization vertical DC grounded Yes Connections Band 1 Band 2 Band 3 Band 4 Band 5 Port 1 X X X X X General Data Indicated VSWR values are valid for a metallic ground plane of 0.2 x 0.2m or larger for the 806-6425 MHz frequency band. Indicated gain values will be achieved on a metallic ground plane of 1 x 1 m or larger. There is no applicable EU directive nor related harmonized standard for passive antennas. Consequently there is no CE marking on these antennas and no EU Declaration of Conformity can be issued. Mechanical Data Dimensions (mm) 40 x 100 x 145 (Heigth x Width x Depth) Weight (kg) 0.488 Document: DOC-0000329322 BN / PDO AX / date of publication: 14.04.2021 18:06:52 / uncontrolled copy Page 1/2Data Sheet SENCITY Rail Low Profile Antenna 1399.17.0125 High-voltage-protection: no voltage on RF port, if catenary line touches antenna (EN 50124-1, 24 kVAC/1min). High-current-protection: Designed acc. to UIC 533, DC-grounded antenna element protection against lightning and short circuit with catenary lines (EN50388, EN 50122-1, 40kA/0.1sec) Corrosion Low corrosion design acc. to MIL-F-14072(E). Mounting Shall be installed in longitudinal position to the wind/driving direction. Suitable for installation on high speed trains with a maximum speed of 500 km/hr. 4x composite sealing washers included for silicone-free sealing of the mounting screws. Environmental Data Environmental conditions outdoor Operation temperature (C) -40 to 85 Storage temperature (C) -55 to 85 IP rating IP67, IP69 Flammability rating EN 45545-2 Solar radiation DIN 75220 2011/65/EU (RoHS - including compliant acc. Annex III 2015/863 and 2017/2102) Lead-free soldered not soldered WEEE 2012/19/EU no special marking needed ELV 2000/53/EC compliant REACH 1907/2006/EC compliant Environmental tests: EN 50155:2007 Flammability rating: EN 45545-2. Material Data Radome colour RAL 7043 (dark grey) Radome material ASA (acrylic ester-styrene-acrylonitrile) Back plate/base plate colour grey Back plate/base plate material Aluminium Plating Passivated (Plating) Related Products 9090.99.0062 Sencity Rail Mounting plate xxxCustomer specificxxx 9091.99.0257 Sencity Rail - M10 sealing washer kit Related Documents Mounting instruction DOC-0000311051 Painting instruction DOC-0000256180 Security instruction DOC-0000278984 Outline drawing DOU-00144038 3D-model DOC-0000326786 Additional Information This product meets the Deutsche Bahn specifications for rolling stock equipment. HUBER+SUHNER is certified according to ISO 9001, ISO 14001, AS/EN9100, ISO/TS 16949 and IRIS. www.hubersuhner.com Waiver: Fact and figures herein are for information only and do not represent any warranty of any kind. Document: DOC-0000329322 BN / PDO AX / date of publication: 14.04.2021 18:06:52 / uncontrolled copy Page 2/2