FVA100 ICCNexergy Page 1 of 3 FVA100 Series 100 W ITE Open Frame Power Supply High Efficiency: Level V Up to 120W with Forced Air High Power Density 8.7/in3 Hold-up Time >60ms at full load EISA and CEC Compliant Power Factor Correction Grounded Output Safety Approval - EN60950-1 CEC Compliant Grounded Output Safety Approval - EN60950-1 Elpac Part Output Output Peak Total Typical Number Voltage Current Current Regulation Efficiency FVA100012A 12.0V 8.3A 10.0A 5% 88% FVA100015A 15.0V 6.7A 8.0A 5% 88% FVA100018A 18.0V 5.6A 6.7A 5% 89% FVA100024A 24.0V 4.2A 5.0A 5% 89% Input Input Voltage 85 - 264VAC 100 - 240VAC Nominal Input Frequency 47 - 63Hz Input Current <2A rms Inrush Current <37A at 230VAC cold start Power Factor >0.96 Zero Load Power Consumption <0.5W Touch Leakage Current <125A 132VAC 60Hz <175A 264VAC 60Hz FVA100 ICCNexergy Page 2 of 3 Output Output Voltage See Table Total Regulation +/-5% Minimum Load No minimum load required Start-Up Delay <750ms Hold-Up Time >60ms at any input voltage Ripple & Noise <1% pk-pk ** Over Voltage Protection 110-135% Over Temperature Protection Active - Recoverable plus Passive - Non Recoverable Over Current Protetion 120 - 180% Short Circuit Protection shutdown, auto-restart (hiccup mode) General Efficiency Avg Efficiency 88.6% 115VAC 89.5% 230VAC MTBF min. 200,000 hours demonstrated Size 4.50 Weight 0.66 lbs (.30 kg) Power Density 8.7W/in3 (at 120W) Environmental Operating Temperature 0 70C (Full load to 50C, derate linearly to 50% load at 70C) Storage Temperature -40C to +85C Relative Humidity 5-95%, non-condensing Cooling Natural Convection (100W) or Forced Air (120W) Vibration All units production tested to 19.6m/s2 EMC & Safety Emissions FCC class B, CISPR22 class B EN61000-3-2, -3 Immunity EN61000-4-2, -3, -4, -5, -6, -8, -11