ISB-100-A-800 ICE

ISB S eries Current S ense Transducers For the electronic measurement of AC and DC Signals Connector Version Lead Wire Version Version Matrix Response Time Bandwidth Supplementary Output I/O Terminals ISB-XXX-A-600 8 S 90kHz Temperature Connector ISB-XXX-A-601 8 S 90kHz Reference Connector ISB-XXX-A-604 8 S 90kHz Temperature Lead Wires ISB-XXX-A-606 8 S 90kHz Reference Lead Wires ISB-XXX-A-800 3 S 200kHz Reference Connector ISB-XXX-A-802 3 S 200kHz Reference Lead Wires Measurable C urrent Ranges Part Number Table I Output Slope* P ISB-100-A-YZZ +/- 100 20.000 mV/A ISB-175-A-YZZ +/- 175 11.429 mV/A ISB-300-A-YZZ +/- 300 6.667 mV/A ISB-425-A-YZZ +/- 425 4.706 mV/A Extended R ange I PE ISB -550-A-Y ZZ +/- 550 3.636 mV/A ISB -670-A-YZZ +/- 670 2.985 mV/A ISB Analog F amily Features Applications Fast Response Time Easy Busbar Mounting DC/AC Converters Wideband DC to 90kHz/200 kHz Analog Output DC/DC Converters Customizable Current Range Factory Programmable Battery Management Temp. Output for Compensation Small Package S ize A C and DC Motor Drives -600 and -604 models Welding Applications Solar Applications www.icecomponents.com ICE reserves the right to make changes to its standard parts without prior notice. Sep 2017 Electrical Specifications Accuracy I Linear R ange Accuracy ( I )** <= 0.6 % P P I Accuracy ( I ) <= 2 .5 % Extended R ange PE PE Supply Voltage (V ) 5V(+/- 0.5V) 12mA Linearity Error <= 0 .1 % dd Secondary Output Voltage Ratiometric to Inpu t Linearity Error (I ) <= 1.0% PE Output at +Ip 90% of V DC Offset Accuracy <= 10 m V <= 0.25 % dd Output at -Ip 10% of V DC O ffset H ysteresis <= 10 mV < = 0.25 % dd Output at 0A 50% of V DC Offset Thermal Drift <= 0.1 mV/C dd Clamped Output High 90% of V dd Clamped Output Low 10% of V Temperature Output (for 600 and 604 v ersions) dd Output Current +/- 2 mA Offset 1.38V 35C Response Time 3 S / 8 S Accuracy (Full range) +/- 5C Slope 13.5mV/C Absolute Maximums I +/- 0.1 mA OUT Overvoltage V Protection. +20 V or +10V DD Reverse V Protection -10 V General D ata DD Ambient Operating Output Voltage M ax. +10 V Temp. -40 to +85 C Reverse Vout Max. -0.3 V Ambient Storage Temp. -40 to +90 C Reverse Iout Max. -50 m A V for AC I nsulation 4.3 kV RMS Output C urrent Max. Safety Standard EN50178 For 600/ 601/ 604/ 606 +/- 300 mA EMC Standard EN61000 For 800/ 802 +/- 70 mA CTI 600 V For 600, 6 01 and 800 Versions For 604, 606 and 802 V ersions Creepage Distance: 8.5 mm Creepage Distance: > 140mm Clearance Distance: 8.5 mm Clearance Distance: >140 mm Required Mating Connector Lead Wire Type JST SHR-04V-S-B 22 AWG Stranded UL3239 3kV R ated JST SSH-003T-P0.2 (Contact) x 4 Connector Information* Connection Information Pin 1 - V ( Supply) Wire 1 ( Red) - V (Supply) DD DD Pin 2 - Output Wire 2 (Black) - Output Pin 3 - T emp. or Ref. Output Wire 3 (Blue) - Temp. or Ref Output Pin 4 - V (Ground) Wire 4 (White) - V (Ground) SS SS Notes Analog Output Notes * All specifications at 25C and assumes 5V . DD For pull down, resistor is * Specifications dependent on mechanical attachment. between pin 2 and pin 4 * Specifications are % full scale. F or pull up, r esistor is * Output slope is dependent on V . DD between pin 2 and pin 1 ** We recommend mounting the sensors with non-magnetic F or -800 version, Pin 2 and Pin 3 is screws (e.g. stainless steel, brass, bronze, copper and interchanged. aluminum) for maximum accuracy. www.icecomponents.com ICE reserves the right to make changes to its standard parts without prior notice. Sep 2017