Technical Datasheet: High-performance plastic type CP General notes PEEK polyetheretherketone reinforced with carbon fibre very hard, rigid, high tensile and flexural strength, very high wear resistance high heat capability (260-300C), good dimension stability, low thermal linear expansion coefficient excellent resistance to chemicals and aggressive agents, excellent resistance to thermal ageing. ESD-safe material typical applications include handling of components in cleaning/chemical/assembly processes also at high temperature (soldering). Mechanical properties Flexural modulus +23C: 21400 MPa ISO 178 ASTM D 790 Flexural strength +23C 350 MPa ISO 178 ASTM D 790 Tensile modulus +23C 24000 MPa ISO 527 ASTM D 638 Tensile strength +23C: 190 MPa ISO 527 ASTM D 638 Izod - Impact strength (notched) 65 J/m ISO 180/4A ASTM D 256 +23C: Thermal properties Temp. of defl. under load (1.80 MPa): 300 C ISO 75 ASTM D648 Continuous Use Temperature 260C 20000 h Short Time Temperature 300C Electrical properties 6 7 Surface resistivity: 10 -10 Ohm Decay time: < 0.2 sec 1000-10 V Other properties Density 1.39 g/ccm ISO 1183 Water absorption in water 23C (24h) 0.01% ISO 62 This document contains information based on average values as obtained from the results of laboratory tests and observations made on the material. Ideal-Tek SA declines all responsibility from an improper use of the product described in this document. Chemical Resistance Guide of CP Acids CHEMICAL 23C (73F) 100C (212F) 200C (392F) Acetic Acid, 10% Conc. A A - Acetic Acid, Conc. A A A Acetic Acid, Glacial A A - Acrylic Acid A A - Aqua Regia C C C Benzene Sulphonic Acid C - - Benzoic Acid A A - Boric Acid A A - Carbolic Acid A - - Carbonic Acid A A - Chloracetic Acid A A - Chlorosulfonic Acid C C C Chromic Acid, 40% Conc. A - - Chromic Acid, Conc. C C C Citric Acid A A - Formic Acid B B - Hydrobromic Acid (100%) C C C Hydrochloric Acid, 10% Conc. A A - Hydrochloric Acid, Conc. A B - Hydrocyanic Acid A A - Hydrofluoric Acid (40%) C C - Hydrofluoric Acid (70%) C C - Lactic Acid A A - Maleic Acid A A - Nitric Acid, 10% Conc. A A - Nitric Acid, 30% Conc. B - - Nitric Acid, 50% Conc. C C C Nitric Acid, Conc. C C C Nitrous Acid, 10% A - - Oleic Acid A - - Oleum C C C Oxalic Acid A A - Perchloric Acid A A - Phosphoric Acid, 10% Conc. A A A Phosphoric Acid, 50% Conc. A A A Phosphoric Acid, 80% Conc. A A - Phthalic Acid A A - Picric Acid A A - Silicic Acid A A - Sulphuric Acid, <40% Conc. B B B Sulphuric Acid, >40% Conc. C C C Sulphurous Acid A A - Tannic Acid, 10% Conc. A A - Tartaric Acid A A - This document contains information based on average values as obtained from the results of laboratory tests and observations made on the material. Ideal-Tek SA declines all responsibility from an improper use of the product described in this document.